A Taxonomy of Quality Metrics for Cloud Services

[EN] A large number of metrics with which to assess the quality of cloud services have been proposed over the last years. However, this knowledge is still dispersed, and stakeholders have little or no guidance when choosing metrics that will be suitable to evaluate their cloud services. The objective of this paper is, therefore, to systematically identify, taxonomically classify, and compare existing quality of service (QoS) metrics in the cloud computing domain. We conducted a systematic literature review of 84 studies selected from a set of 4333 studies that were published from 2006 to November 2018. We specifically identified 470 metric operationalizations that were then classified using a taxonomy, which is also introduced in this paper. The data extracted from the metrics were subsequently analyzed using thematic analysis. The findings indicated that most metrics evaluate quality attributes related to performance efficiency (64%) and that there is a need for metrics that evaluate other characteristics, such as security and compatibility. The majority of the metrics are used during the Operation phase of the cloud services and are applied to the running service. Our results also revealed that metrics for cloud services are still in the early stages of maturity only 10% of the metrics had been empirically validated. The proposed taxonomy can be used by practitioners as a guideline when specifying service level objectives or deciding which metric is best suited to the evaluation of their cloud services, and by researchers as a comprehensive quality framework in which to evaluate their approaches.This work was supported by the Spanish Ministry of Science, Innovation and Universities through the Adapt@Cloud Project under Grant TIN2017-84550-R. The work of Ximena Guerron was supported in part by the Universidad Central del Ecuador (UCE), and in part by the Banco Central del Ecuador.Guerron, X.; Abrahao Gonzales, SM.; Insfran, E.; Fernández-Diego, M.; González-Ladrón-De-Guevara, F. (2020). A Taxonomy of Quality Metrics for Cloud Services. IEEE Access. 8:131461-131498. https://doi.org/10.1109/ACCESS.2020.3009079S131461131498

A Hybrid Model to Extend Vehicular Intercommunication V2V through D2D Architecture

In the recent years, many solutions for Vehicle to Vehicle (V2V) communication were proposed to overcome failure problems (also known as dead ends). This paper proposes a novel framework for V2V failure recovery using Device-to-Device (D2D) communications. Based on the unified Intelligent Transportation Systems (ITS) architecture, LTE-based D2D mechanisms can improve V2V dead ends failure recovery delays. This new paradigm of hybrid V2V-D2D communications overcomes the limitations of traditional V2V routing techniques. According to NS2 simulation results, the proposed hybrid model decreases the end to end delay (E2E) of messages delivery. A complete comparison of different D2D use cases (best & worst scenarios) is presented to show the enhancements brought by our solution compared to traditional V2V techniques.Comment: 6 page

Dynamic load balancing for the distributed mining of molecular structures

In molecular biology, it is often desirable to find common properties in large numbers of drug candidates. One family of methods stems from the data mining community, where algorithms to find frequent graphs have received increasing attention over the past years. However, the computational complexity of the underlying problem and the large amount of data to be explored essentially render sequential algorithms useless. In this paper, we present a distributed approach to the frequent subgraph mining problem to discover interesting patterns in molecular compounds. This problem is characterized by a highly irregular search tree, whereby no reliable workload prediction is available. We describe the three main aspects of the proposed distributed algorithm, namely, a dynamic partitioning of the search space, a distribution process based on a peer-to-peer communication framework, and a novel receiverinitiated load balancing algorithm. The effectiveness of the distributed method has been evaluated on the well-known National Cancer Institute’s HIV-screening data set, where we were able to show close-to linear speedup in a network of workstations. The proposed approach also allows for dynamic resource aggregation in a non dedicated computational environment. These features make it suitable for large-scale, multi-domain, heterogeneous environments, such as computational grids

Memory Subsystem Optimization Techniques for Modern High-Performance General-Purpose Processors

abstract: General-purpose processors propel the advances and innovations that are the subject of humanity’s many endeavors. Catering to this demand, chip-multiprocessors (CMPs) and general-purpose graphics processing units (GPGPUs) have seen many high-performance innovations in their architectures. With these advances, the memory subsystem has become the performance- and energy-limiting aspect of CMPs and GPGPUs alike. This dissertation identifies and mitigates the key performance and energy-efficiency bottlenecks in the memory subsystem of general-purpose processors via novel, practical, microarchitecture and system-architecture solutions. Addressing the important Last Level Cache (LLC) management problem in CMPs, I observe that LLC management decisions made in isolation, as in prior proposals, often lead to sub-optimal system performance. I demonstrate that in order to maximize system performance, it is essential to manage the LLCs while being cognizant of its interaction with the system main memory. I propose ReMAP, which reduces the net memory access cost by evicting cache lines that either have no reuse, or have low memory access cost. ReMAP improves the performance of the CMP system by as much as 13%, and by an average of 6.5%. Rather than the LLC, the L1 data cache has a pronounced impact on GPGPU performance by acting as the bandwidth filter for the rest of the memory subsystem. Prior work has shown that the severely constrained data cache capacity in GPGPUs leads to sub-optimal performance. In this thesis, I propose two novel techniques that address the GPGPU data cache capacity problem. I propose ID-Cache that performs effective cache bypassing and cache line size selection to improve cache capacity utilization. Next, I propose LATTE-CC that considers the GPU’s latency tolerance feature and adaptively compresses the data stored in the data cache, thereby increasing its effective capacity. ID-Cache and LATTE-CC are shown to achieve 71% and 19.2% speedup, respectively, over a wide variety of GPGPU applications. Complementing the aforementioned microarchitecture techniques, I identify the need for system architecture innovations to sustain performance scalability of GPG- PUs in the face of slowing Moore’s Law. I propose a novel GPU architecture called the Multi-Chip-Module GPU (MCM-GPU) that integrates multiple GPU modules to form a single logical GPU. With intelligent memory subsystem optimizations tailored for MCM-GPUs, it can achieve within 7% of the performance of a similar but hypothetical monolithic die GPU. Taking a step further, I present an in-depth study of the energy-efficiency characteristics of future MCM-GPUs. I demonstrate that the inherent non-uniform memory access side-effects form the key energy-efficiency bottleneck in the future. In summary, this thesis offers key insights into the performance and energy-efficiency bottlenecks in CMPs and GPGPUs, which can guide future architects towards developing high-performance and energy-efficient general-purpose processors.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Mainstream parallel array programming on cell

We present the E] compiler and runtime library for the ‘F’ subset of the Fortran 95 programming language. ‘F’ provides first-class support for arrays, allowing E] to implicitly evaluate array expressions in parallel using the SPU coprocessors of the Cell Broadband Engine. We present performance results from four benchmarks that all demonstrate absolute speedups over equivalent ‘C’ or Fortran versions running on the PPU host processor. A significant benefit of this straightforward approach is that a serial implementation of any code is always available, providing code longevity, and a familiar development paradigm

Scalable Interactive Volume Rendering Using Off-the-shelf Components

This paper describes an application of a second generation implementation of the Sepia architecture (Sepia-2) to interactive volu-metric visualization of large rectilinear scalar fields. By employingpipelined associative blending operators in a sort-last configuration a demonstration system with 8 rendering computers sustains 24 to 28 frames per second while interactively rendering large data volumes (1024x256x256 voxels, and 512x512x512 voxels). We believe interactive performance at these frame rates and data sizes is unprecedented. We also believe these results can be extended to other types of structured and unstructured grids and a variety of GL rendering techniques including surface rendering and shadow map-ping. We show how to extend our single-stage crossbar demonstration system to multi-stage networks in order to support much larger data sizes and higher image resolutions. This requires solving a dynamic mapping problem for a class of blending operators that includes Porter-Duff compositing operators