Mitigating unbalance using distributed network reconfiguration techniques in distributed power generation grids with services for electric vehicles: A review

© 2019 Elsevier Ltd With rapid movement to combat climate change by reducing greenhouse gases, there is an increasing trend to use more electric vehicles (EVs) and renewable energy sources (RES). With more EVs integration into electricity grid, this raises many challenges for the distribution service operators (DSOs) to integrate such RES-based, distributed generation (DG) and EV-like distributed loads into distribution grids. Effective management of distribution network imbalance is one of the challenges. The distribution network reconfiguration (DNR) techniques are promising to address the issue of imbalance along with other techniques such as the optimal distributed generation placement and allocation (OPDGA) method. This paper presents a systematic and thorough review of DNR techniques for mitigating unbalance of distribution networks, based on papers published in peer-reviewed journals in the last three decades. It puts more focus on how the DNR techniques have been used to manage network imbalance due to distributed loads and DG units. To the best of our knowledge, this is the first attempt to review the research works in the field using DNR techniques to mitigate unbalanced distribution networks. Therefore, this paper will serve as a prime source of the guidance for mitigating network imbalance using the DNR techniques to the new researchers in this field

Hybridization of particle Swarm Optimization with Bat Algorithm for optimal reactive power dispatch

This research presents a Hybrid Particle Swarm Optimization with Bat Algorithm (HPSOBA) based approach to solve Optimal Reactive Power Dispatch (ORPD) problem. The primary objective of this project is minimization of the active power transmission losses by optimally setting the control variables within their limits and at the same time making sure that the equality and inequality constraints are not violated. Particle Swarm Optimization (PSO) and Bat Algorithm (BA) algorithms which are nature-inspired algorithms have become potential options to solving very difficult optimization problems like ORPD. Although PSO requires high computational time, it converges quickly; while BA requires less computational time and has the ability of switching automatically from exploration to exploitation when the optimality is imminent. This research integrated the respective advantages of PSO and BA algorithms to form a hybrid tool denoted as HPSOBA algorithm. HPSOBA combines the fast convergence ability of PSO with the less computation time ability of BA algorithm to get a better optimal solution by incorporating the BA’s frequency into the PSO velocity equation in order to control the pace. The HPSOBA, PSO and BA algorithms were implemented using MATLAB programming language and tested on three (3) benchmark test functions (Griewank, Rastrigin and Schwefel) and on IEEE 30- and 118-bus test systems to solve for ORPD without DG unit. A modified IEEE 30-bus test system was further used to validate the proposed hybrid algorithm to solve for optimal placement of DG unit for active power transmission line loss minimization. By comparison, HPSOBA algorithm results proved to be superior to those of the PSO and BA methods. In order to check if there will be a further improvement on the performance of the HPSOBA, the HPSOBA was further modified by embedding three new modifications to form a modified Hybrid approach denoted as MHPSOBA. This MHPSOBA was validated using IEEE 30-bus test system to solve ORPD problem and the results show that the HPSOBA algorithm outperforms the modified version (MHPSOBA).Electrical and Mining EngineeringM. Tech. (Electrical Engineering

Scientific research trends about metaheuristics in process optimization and case study using the desirability function

This study aimed to identify the research gaps in Metaheuristics, taking into account the publications entered in a database in 2015 and to present a case study of a company in the Sul Fluminense region using the Desirability function. To achieve this goal, applied research of exploratory nature and qualitative approach was carried out, as well as another of quantitative nature. As method and technical procedures were the bibliographical research, some literature review, and an adopted case study respectively. As a contribution of this research, the holistic view of opportunities to carry out new investigations on the theme in question is pointed out. It is noteworthy that the identified study gaps after the research were prioritized and discriminated, highlighting the importance of the viability of metaheuristic algorithms, as well as their benefits for process optimization

Intelligent optimisation of analogue circuits using particle swarm optimisation, genetic programming and genetic folding

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London.This research presents various intelligent optimisation methods which are: genetic algorithm (GA), particle swarm optimisation (PSO), artificial bee colony algorithm (ABCA), firefly algorithm (FA) and bacterial foraging optimisation (BFO). It attempts to minimise analogue electronic filter and amplifier circuits, taking a cascode amplifier design as a case study, and utilising the above-mentioned intelligent optimisation algorithms with the aim of determining the best among them to be used. Small signal analysis (SSA) conversion of the cascode circuit is performed while mesh analysis is applied to transform the circuit to matrices form. Computer programmes are developed in Matlab using the above mentioned intelligent optimisation algorithms to minimise the cascode amplifier circuit. The objective function is based on input resistance, output resistance, power consumption, gain, upperfrequency band and lower frequency band. The cascode circuit result presented, applied the above-mentioned existing intelligent optimisation algorithms to optimise the same circuit and compared the techniques with the one using Nelder-Mead and the original circuit simulated in PSpice. Four circuit element types (resistors, capacitors, transistors and operational amplifier (op-amp)) are targeted using the optimisation techniques and subsequently compared to the initial circuit. The PSO based optimised result has proven to be best followed by that of GA optimised technique regarding power consumption reduction and frequency response. This work modifies symbolic circuit analysis in Matlab (MSCAM) tool which utilises Netlist from PSpice or from simulation to generate matrices. These matrices are used for optimisation or to compute circuit parameters. The tool is modified to handle both active and passive elements such as inductors, resistors, capacitors, transistors and op-amps. The transistors are transformed into SSA and op-amp use the SSA that is easy to implement in programming. Results are presented to illustrate the potential of the algorithm. Results are compared to PSpice simulation and the approach handled larger matrices dimensions compared to that of existing symbolic circuit analysis in Matlab tool (SCAM). The SCAM formed matrices by adding additional rows and columns due to how the algorithm was developed which takes more computer resources and limit its performance. Next to this, this work attempts to reduce component count in high-pass, low-pass, and all- pass active filters. Also, it uses a lower order filter to realise same results as higher order filter regarding frequency response curve. The optimisers applied are GA, PSO (the best two methods among them) and Nelder-Mead (the worst method) are used subsequently for the filters optimisation. The filters are converted into their SSA while nodal analysis is applied to transform the circuit to matrices form. High-pass, low-pass, and all- pass active filters results are presented to demonstrate the effectiveness of the technique. Results presented have shown that with a computer code, a lower order op-amp filter can be applied to realise the same results as that of a higher order one. Furthermore, PSO can realise the best results regarding frequency response for the three results, followed by GA whereas Nelder- Mead has the worst results. Furthermore, this research introduced genetic folding (GF), MSCAM, and automatically simulated Netlist into existing genetic programming (GP), which is a new contribution in this work, which enhances the development of independent Matlab toolbox for the evolution of passive and active filter circuits. The active filter circuit evolution especially when operational amplifier is involved as a component is of it first kind in circuit evolution. In the work, only one software package is used instead of combining PSpice and Matlab in electronic circuit simulation. This saves the elapsed time for moving the simulation between the two platforms and reduces the cost of subscription. The evolving circuit from GP using Matlab simulation is automatically transformed into a symbolic Netlist also by Matlab simulation. The Netlist is fed into MSCAM; where MSCAM uses it to generate matrices for the simulation. The matrices enhance frequency response analysis of low-pass, high-pass, band-pass, band-stop of active and passive filter circuits. After the circuit evolution using the developed GP, PSO is then applied to optimise some of the circuits. The algorithm is tested with twelve different circuits (five examples of the active filter, four examples of passive filter circuits and three examples of transistor amplifier circuits) and the results presented have shown that the algorithm is efficient regarding design.Tertiary Education Trust Fund (TETFUND) through University of Calabar, Nigeria

A Comprehensive Review of Congestion Management in Power System

In recent decades, restructuring has cut across all probable domains, involving the power supply industry. The restructuring has brought about considerable changes whereby electricity is now a commodity and has become a deregulated one. These competitive markets have paved the way for countless entrants. This has caused overload and congestion on transmission lines. In addition, the open access transmission network has created a more intensified congestion issue. Therefore, congestion management on power systems is relevant and central significance to the power industry. This manuscript review few congestion management techniques, consists of Reprogramming Generation (GR), Load Shedding, Optimal Distributed Generation (DG) Location, Nodal Pricing, Free Methods, Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Fuzzy Logic System Method, as well as Additional Renewable Energy Sources. In this manuscript a review work is performed to unite the entire publications on congestion management

A Comprehensive Review of Congestion Management in Power System

In recent decades, restructuring has cut across all probable domains, involving the power supply industry. The restructuring has brought about considerable changes whereby electricity is now a commodity and has become a deregulated one. These competitive markets have paved the way for countless entrants. This has caused overload and congestion on transmission lines. In addition, the open access transmission network has created a more intensified congestion issue. Therefore, congestion management on power systems is relevant and central significance to the power industry. This manuscript review few congestion management techniques, consists of Reprogramming Generation (GR), Load Shedding, Optimal Distributed Generation (DG) Location, Nodal Pricing, Free Methods, Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Fuzzy Logic System Method, as well as Additional Renewable Energy Sources. In this manuscript a review work is performed to unite the entire publications on congestion management

Mathematical Approaches to Modeling, Optimally Designing, and Controlling Electric Machine

Optimal performance of the electric machine/drive system is mandatory to improve the energy consumption and reliability. To achieve this goal, mathematical models of the electric machine/drive system are necessary. Hence, this motivated the editors to instigate the Special Issue “Mathematical Approaches to Modeling, Optimally Designing, and Controlling Electric Machine”, aiming to collect novel publications that push the state-of-the art towards optimal performance for the electric machine/drive system. Seventeen papers have been published in this Special Issue. The published papers focus on several aspects of the electric machine/drive system with respect to the mathematical modelling. Novel optimization methods, control approaches, and comparative analysis for electric drive system based on various electric machines were discussed in the published papers

Modeling and Compensation of Hysteresis In Piezoelectric Actuators: A Physical Approach

A study in the polarization domain is conducted by probing the impedance of the piezoelectric actuator as it moves along its trajectory. A sensing signal is overlaid over a driving signal that is used to vary the position of the device. The electric polarisation is extracted from the capacitance measurement calculated from the impedance. These polarisation curves are then modelled using the Jiles-Atherton model and compensated for using the inverse model. These measurements give insight into the ferroelectric processes within the piezoelectric actuator, which operate on the polarisation state. In addition, research has been conducted on the topic of parameter estimation of hysteresis models. This dissertation proposes a Monte Carlo study on a novel normalised Jiles-Atherton model to generate a statistical set of model solutions to compare area and remnant displacement characteristics for different parameter selections. Two parameters were found to be the most responsible for changes in these characteristics, and solutions near the desired values of the measured hysteresis curves were found to be densely distributed in certain areas of the parameter space. Different parameter estimation techniques are proposed for the Prandtl-Ishlinskii model. For this model, the parameters have geometrical significance in the slope of certain points of the hysteresis curve. A novel rescaling procedure is developed to scale a Prandtl-Ishlinskii model hysteresis curve area to a new value without requiring a refitting of the coefficients and a frequency-dependent Prandtl-Ishlinskii model is developed. Finally, a temperature-dependent, asymmetric Prandtl-Ishlinskii (TAPI) model is developed to account for the changes in hysteresis due to the external temperature. These effects are modelled in the charge domain as an extra bound charge that appears as a result of domain reorientation effects. The temperature effectively changes the amount of energy required to break pinning sites in the actuator which changes the shape of the curve. The TAPI model is then implemented on a Fabry-Perot interferometer system consisting of three piezoelectric actuators controlling the placement of a mirror forming the etalon. A decoupled inverse TAPI model is shown to effectively linearise the output of this system at different temperatures

Modeling and Compensation of Hysteresis In Piezoelectric Actuators: A Physical Approach

A study in the polarization domain is conducted by probing the impedance of the piezoelectric actuator as it moves along its trajectory. A sensing signal is overlaid over a driving signal that is used to vary the position of the device. The electric polarisation is extracted from the capacitance measurement calculated from the impedance. These polarisation curves are then modelled using the Jiles-Atherton model and compensated for using the inverse model. These measurements give insight into the ferroelectric processes within the piezoelectric actuator, which operate on the polarisation state. In addition, research has been conducted on the topic of parameter estimation of hysteresis models. This dissertation proposes a Monte Carlo study on a novel normalised Jiles-Atherton model to generate a statistical set of model solutions to compare area and remnant displacement characteristics for different parameter selections. Two parameters were found to be the most responsible for changes in these characteristics, and solutions near the desired values of the measured hysteresis curves were found to be densely distributed in certain areas of the parameter space. Different parameter estimation techniques are proposed for the Prandtl-Ishlinskii model. For this model, the parameters have geometrical significance in the slope of certain points of the hysteresis curve. A novel rescaling procedure is developed to scale a Prandtl-Ishlinskii model hysteresis curve area to a new value without requiring a refitting of the coefficients and a frequency-dependent Prandtl-Ishlinskii model is developed. Finally, a temperature-dependent, asymmetric Prandtl-Ishlinskii (TAPI) model is developed to account for the changes in hysteresis due to the external temperature. These effects are modelled in the charge domain as an extra bound charge that appears as a result of domain reorientation effects. The temperature effectively changes the amount of energy required to break pinning sites in the actuator which changes the shape of the curve. The TAPI model is then implemented on a Fabry-Perot interferometer system consisting of three piezoelectric actuators controlling the placement of a mirror forming the etalon. A decoupled inverse TAPI model is shown to effectively linearise the output of this system at different temperatures