Hybrid Synchronization of the Generalized Lotka-Volterra Three-Species Biological Systems via Adaptive Control

Abstract: Since the recent research has shown the importance of biological control in many biological systems appearing in nature, this research paper investigates research in the dynamic and chaotic analysis of the generalized Lotka-Volterra three-species biological system, which was studied b

Control of chaos in nonlinear circuits and systems

Nonlinear circuits and systems, such as electronic circuits (Chapter 5), power converters (Chapter 6), human brains (Chapter 7), phase lock loops (Chapter 8), sigma delta modulators (Chapter 9), etc, are found almost everywhere. Understanding nonlinear behaviours as well as control of these circuits and systems are important for real practical engineering applications. Control theories for linear circuits and systems are well developed and almost complete. However, different nonlinear circuits and systems could exhibit very different behaviours. Hence, it is difficult to unify a general control theory for general nonlinear circuits and systems. Up to now, control theories for nonlinear circuits and systems are still very limited. The objective of this book is to review the state of the art chaos control methods for some common nonlinear circuits and systems, such as those listed in the above, and stimulate further research and development in chaos control for nonlinear circuits and systems. This book consists of three parts. The first part of the book consists of reviews on general chaos control methods. In particular, a time-delayed approach written by H. Huang and G. Feng is reviewed in Chapter 1. A master slave synchronization problem for chaotic Lur’e systems is considered. A delay independent and delay dependent synchronization criteria are derived based on the H performance. The design of the time delayed feedback controller can be accomplished by means of the feasibility of linear matrix inequalities. In Chapter 2, a fuzzy model based approach written by H.K. Lam and F.H.F. Leung is reviewed. The synchronization of chaotic systems subject to parameter uncertainties is considered. A chaotic system is first represented by the fuzzy model. A switching controller is then employed to synchronize the systems. The stability conditions in terms of linear matrix inequalities are derived based on the Lyapunov stability theory. The tracking performance and parameter design of the controller are formulated as a generalized eigenvalue minimization problem which is solved numerically via some convex programming techniques. In Chapter 3, a sliding mode control approach written by Y. Feng and X. Yu is reviewed. Three kinds of sliding mode control methods, traditional sliding mode control, terminal sliding mode control and non-singular terminal sliding mode control, are employed for the control of a chaotic system to realize two different control objectives, namely to force the system states to converge to zero or to track desired trajectories. Observer based chaos synchronizations for chaotic systems with single nonlinearity and multi-nonlinearities are also presented. In Chapter 4, an optimal control approach written by C.Z. Wu, C.M. Liu, K.L. Teo and Q.X. Shao is reviewed. Systems with nonparametric regression with jump points are considered. The rough locations of all the possible jump points are identified using existing kernel methods. A smooth spline function is used to approximate each segment of the regression function. A time scaling transformation is derived so as to map the undecided jump points to fixed points. The approximation problem is formulated as an optimization problem and solved via existing optimization tools. The second part of the book consists of reviews on general chaos controls for continuous-time systems. In particular, chaos controls for Chua’s circuits written by L.A.B. Tôrres, L.A. Aguirre, R.M. Palhares and E.M.A.M. Mendes are discussed in Chapter 5. An inductorless Chua’s circuit realization is presented, as well as some practical issues, such as data analysis, mathematical modelling and dynamical characterization, are discussed. The tradeoff among the control objective, the control energy and the model complexity is derived. In Chapter 6, chaos controls for pulse width modulation current mode single phase H-bridge inverters written by B. Robert, M. Feki and H.H.C. Iu are discussed. A time delayed feedback controller is used in conjunction with the proportional controller in its simple form as well as in its extended form to stabilize the desired periodic orbit for larger values of the proportional controller gain. This method is very robust and easy to implement. In Chapter 7, chaos controls for epileptiform bursting in the brain written by M.W. Slutzky, P. Cvitanovic and D.J. Mogul are discussed. Chaos analysis and chaos control algorithms for manipulating the seizure like behaviour in a brain slice model are discussed. The techniques provide a nonlinear control pathway for terminating or potentially preventing epileptic seizures in the whole brain. The third part of the book consists of reviews on general chaos controls for discrete-time systems. In particular, chaos controls for phase lock loops written by A.M. Harb and B.A. Harb are discussed in Chapter 8. A nonlinear controller based on the theory of backstepping is designed so that the phase lock loops will not be out of lock. Also, the phase lock loops will not exhibit Hopf bifurcation and chaotic behaviours. In Chapter 9, chaos controls for sigma delta modulators written by B.W.K. Ling, C.Y.F. Ho and J.D. Reiss are discussed. A fuzzy impulsive control approach is employed for the control of the sigma delta modulators. The local stability criterion and the condition for the occurrence of limit cycle behaviours are derived. Based on the derived conditions, a fuzzy impulsive control law is formulated so that the occurrence of the limit cycle behaviours, the effect of the audio clicks and the distance between the state vectors and an invariant set are minimized supposing that the invariant set is nonempty. The state vectors can be bounded within any arbitrary nonempty region no matter what the input step size, the initial condition and the filter parameters are. The editors are much indebted to the editor of the World Scientific Series on Nonlinear Science, Prof. Leon Chua, and to Senior Editor Miss Lakshmi Narayan for their help and congenial processing of the edition

Nonlinear Time-Frequency Control Theory with Applications

Nonlinear control is an important subject drawing much attention. When a nonlinear system undergoes route-to-chaos, its response is naturally bounded in the time-domain while in the meantime becoming unstably broadband in the frequency-domain. Control scheme facilitated either in the time- or frequency-domain alone is insufficient in controlling route-to-chaos, where the corresponding response deteriorates in the time and frequency domains simultaneously. It is necessary to facilitate nonlinear control in both the time and frequency domains without obscuring or misinterpreting the true dynamics. The objective of the dissertation is to formulate a novel nonlinear control theory that addresses the fundamental characteristics inherent of all nonlinear systems undergoing route-to-chaos, one that requires no linearization or closed-form solution so that the genuine underlying features of the system being considered are preserved. The theory developed herein is able to identify the dynamic state of the system in real-time and restrain time-varying spectrum from becoming broadband. Applications of the theory are demonstrated using several engineering examples including the control of a non-stationary Duffing oscillator, a 1-DOF time-delayed milling model, a 2-DOF micro-milling system, unsynchronized chaotic circuits, and a friction-excited vibrating disk. Not subject to all the mathematical constraint conditions and assumptions upon which common nonlinear control theories are based and derived, the novel theory has its philosophical basis established in the simultaneous time-frequency control, on-line system identification, and feedforward adaptive control. It adopts multi-rate control, hence enabling control over nonstationary, nonlinear response with increasing bandwidth ? a physical condition oftentimes fails the contemporary control theories. The applicability of the theory to complex multi-input-multi-output (MIMO) systems without resorting to mathematical manipulation and extensive computation is demonstrated through the multi-variable control of a micro-milling system. The research is of a broad impact on the control of a wide range of nonlinear and chaotic systems. The implications of the nonlinear time-frequency control theory in cutting, micro-machining, communication security, and the mitigation of friction-induced vibrations are both significant and immediate

Modelling, identification, and control of a quadrotor helicopter

In this dissertation, we focused on the study of an autonomous flight control of quadrotor helicopter. Robust nonlinear control design strategies using observer-based control are developed, which are capable of achieving reliable and accurate tracking control for quadrotor UAV containing dynamic uncertainties, external disturbances. In order to ease readability of this dissertation, detailed explanations of the mathematical model of quadrotor UAV is provided, including the Newton-Euler formalism, Lyapunov-based stability analysis methods, sliding mode control (SMC) and backstepping fundamentals, and observer-based nonlinear control tools. The tracking control problem of a quadrotor in the presence of model uncertainties and external disturbances is investigated. Particularly, this dissertation presents the design and experimental implementation of nonlinear controller of quadrotor with observer to estimate the uncertainties and external disturbances to meet the desired control objectives. Based on a nonlinear model which considers basic aerodynamic forces and external disturbances, the quadrotor UAV model is simulated to perform a variety of maneuvering such as take-off, landing, smooth translation and horizontal and circular trajectory motions. Backstepping and sliding mode techniques combined with observers are studied, tested and compared. Simulation and a real platform were developed to prove the ability of the observer-based controller to successfully perform certain missions in the presence of unknown external disturbances and can obtain good and satisfactory estimation

TS fuzzy approach for modeling, analysis and design of non-smooth dynamical systems

There has been growing interest in the past two decades in studying the physical model of dynamical systems that can be described by nonlinear, non-smooth differential equations, i.e. non-smooth dynamical systems. These systems exhibit more colourful and complex dynamics compared to their smooth counterparts; however, their qualitative analysis and design are not yet fully developed and still open to exploration. At the same time, Takagi-Sugeno (TS) fuzzy systems have been shown to have a great ability to represent a large class of nonlinear systems and approximate their inherent uncertainties. This thesis explores an area of TS fuzzy systems that have not been considered before; that is, modelling, stability analysis and design for non-smooth dynamical systems. TS fuzzy model structures capable of representing or approximating the essential dis- continuous dynamics of non-smooth systems are proposed in this thesis. It is shown that by incorporating discrete event systems, the proposed structure for TS fuzzy models, which we will call non-smooth TS fuzzy models, can accurately represent the smooth (or contin- uous) as well as non-smooth (or discontinuous) dynamics of different classes of electrical and mechanical non-smooth systems including (sliding and non-sliding) Filippov's systems and impacting systems. The different properties of the TS fuzzy modelling (or formalism) are discussed. It is highlighted that the TS fuzzy formalism, taking advantage of its simple structure, does not need a special platform for its implementation. Stability in its new notion of structural stability (stability of a periodic solution) is one of the most important issues in the qualitative analysis of non-smooth systems. An important part of this thesis is focused on addressing stability issues by extending non- smooth Lyapunov theory for verifying the stability of local orbits, which the non-smooth TS fuzzy models can contain. Stability conditions are proposed for Filippov-type and impacting systems and it is shown that by formulating the conditions as Linear Matrix inequalities (LMIs), the onset of non-smooth bifurcations or chaotic phenomena can be detected by solving a feasibility problem. A number of examples are given to validate the proposed approach. Stability robustness of non-smooth TS fuzzy systems in the presence of model uncertainties is discussed in terms of non-smoothness rather than traditional observer design. The LMI stabilization problem is employed as a building block for devising design strategies to suppress the unwanted chaotic behaviour in non-smooth TS fuzzy models. There have been a large number of control applications in which the overall closed-loop sys tem can be stabilized by switching between pre-designed sub-controllers. Inspired by this idea, the design part of this thesis concentrates on fuzzy-chaos control strategies for Filippov-type systems. These strategies approach the design problem by switching be- tween local state-feedback controllers such that the closed-loop TS fuzzy system of interest rapidly converges to the stable periodic solution of the system. All control strategies are also automated as a design problem recast on linear matrix inequality conditions to be solved by modern optimization techniques. Keywords: Takagi-Sugeno fuzzy systems, non-smooth Lyapunov theory, non-smooth dy- namical systems, piecewise-smooth dynamical systems, structural stability, discontinuity- induced bifurcation, chaos controllers, dc-dc converters, Filippov's system, impacting system, linear matrix inequalities.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Dynamical Systems

Complex systems are pervasive in many areas of science integrated in our daily lives. Examples include financial markets, highway transportation networks, telecommunication networks, world and country economies, social networks, immunological systems, living organisms, computational systems and electrical and mechanical structures. Complex systems are often composed of a large number of interconnected and interacting entities, exhibiting much richer global scale dynamics than the properties and behavior of individual entities. Complex systems are studied in many areas of natural sciences, social sciences, engineering and mathematical sciences. This special issue therefore intends to contribute towards the dissemination of the multifaceted concepts in accepted use by the scientific community. We hope readers enjoy this pertinent selection of papers which represents relevant examples of the state of the art in present day research. [...