Low latency vision-based control for robotics : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Manawatu, New Zealand

In this work, the problem of controlling a high-speed dynamic tracking and interception system using computer vision as the measurement unit was explored. High-speed control systems alone present many challenges, and these challenges are compounded when combined with the high volume of data processing required by computer vision systems. A semi-automated foosball table was chosen as the test-bed system because it combines all the challenges associated with a vision-based control system into a single platform. While computer vision is extremely useful and can solve many problems, it can also introduce many problems such as latency, the need for lens and spatial calibration, potentially high power consumption, and high cost. The objective of this work is to explore how to implement computer vision as the measurement unit in a high-speed controller, while minimising latencies caused by the vision itself, communication interfaces, data processing/strategy, instruction execution, and actuator control. Another objective was to implement the solution in one low-latency, low power, low cost embedded system. A field programmable gate array (FPGA) system on chip (SoC), which combines programmable digital logic with a dual core ARM processor (HPS) on the same chip, was hypothesised to be capable of running the described vision-based control system. The FPGA was used to perform streamed image pre-processing, concurrent stepper motor control and provide communication channels for user input, while the HPS performed the lens distortion mapping, intercept calculation and “strategy” control tasks, as well as controlling overall function of the system. Individual vision systems were compared for latency performance. Interception performance of the semi-automated foosball table was then tested for straight, moderate-speed shots with limited view time, and latency was artificially added to the system and the interception results for the same, centre-field shot tested with a variety of different added latencies. The FPGA based system performed the best in both steady-state latency, and novel event detection latency tests. The developed stepper motor control modules performed well in terms of speed, smoothness, resource consumption, and versatility. They are capable of constant velocity, constant acceleration and variable acceleration profiles, as well as being completely parameterisable. The interception modules on the foosball table achieved a 100% interception rate, with a confidence interval of 95%, and reliability of 98.4%. As artificial latency was added to the system, the performance dropped in terms of overall number of successful intercepts. The decrease in performance was roughly linear with a 60% in reduction in performance caused by 100 ms of added latency. Performance dropped to 0% successful intercepts when 166 ms of latency was added. The implications of this work are that FPGA SoC technology may, in future, enable computer vision to be used as a general purpose, high-speed measurement system for a wide variety of control problems

High-Performance Integrated Window and Façade Solutions for California

The researchers developed a new generation of high-performance façade systems and supporting design and management tools to support industry in meeting California’s greenhouse gas reduction targets, reduce energy consumption, and enable an adaptable response to minimize real-time demands on the electricity grid. The project resulted in five outcomes: (1) The research team developed an R-5, 1-inch thick, triplepane, insulating glass unit with a novel low-conductance aluminum frame. This technology can help significantly reduce residential cooling and heating loads, particularly during the evening. (2) The team developed a prototype of a windowintegrated local ventilation and energy recovery device that provides clean, dry fresh air through the façade with minimal energy requirements. (3) A daylight-redirecting louver system was prototyped to redirect sunlight 15–40 feet from the window. Simulations estimated that lighting energy use could be reduced by 35–54 percent without glare. (4) A control system incorporating physics-based equations and a mathematical solver was prototyped and field tested to demonstrate feasibility. Simulations estimated that total electricity costs could be reduced by 9-28 percent on sunny summer days through adaptive control of operable shading and daylighting components and the thermostat compared to state-of-the-art automatic façade controls in commercial building perimeter zones. (5) Supporting models and tools needed by industry for technology R&D and market transformation activities were validated. Attaining California’s clean energy goals require making a fundamental shift from today’s ad-hoc assemblages of static components to turnkey, intelligent, responsive, integrated building façade systems. These systems offered significant reductions in energy use, peak demand, and operating cost in California

JWalk: a tool for lazy, systematic testing of java classes by design introspection and user interaction

Popular software testing tools, such as JUnit, allow frequent retesting of modified code; yet the manually created test scripts are often seriously incomplete. A unit-testing tool called JWalk has therefore been developed to address the need for systematic unit testing within the context of agile methods. The tool operates directly on the compiled code for Java classes and uses a new lazy method for inducing the changing design of a class on the fly. This is achieved partly through introspection, using Java’s reflection capability, and partly through interaction with the user, constructing and saving test oracles on the fly. Predictive rules reduce the number of oracle values that must be confirmed by the tester. Without human intervention, JWalk performs bounded exhaustive exploration of the class’s method protocols and may be directed to explore the space of algebraic constructions, or the intended design state-space of the tested class. With some human interaction, JWalk performs up to the equivalent of fully automated state-based testing, from a specification that was acquired incrementally

Report from GI-Dagstuhl Seminar 16394: Software Performance Engineering in the DevOps World

This report documents the program and the outcomes of GI-Dagstuhl Seminar 16394 "Software Performance Engineering in the DevOps World". The seminar addressed the problem of performance-aware DevOps. Both, DevOps and performance engineering have been growing trends over the past one to two years, in no small part due to the rise in importance of identifying performance anomalies in the operations (Ops) of cloud and big data systems and feeding these back to the development (Dev). However, so far, the research community has treated software engineering, performance engineering, and cloud computing mostly as individual research areas. We aimed to identify cross-community collaboration, and to set the path for long-lasting collaborations towards performance-aware DevOps. The main goal of the seminar was to bring together young researchers (PhD students in a later stage of their PhD, as well as PostDocs or Junior Professors) in the areas of (i) software engineering, (ii) performance engineering, and (iii) cloud computing and big data to present their current research projects, to exchange experience and expertise, to discuss research challenges, and to develop ideas for future collaborations