Electromagnetic Position Sensing and Force Feedback for a Magnetic Stylus with an Interactive Display

This letter describes the design, implementation, validation, and demonstration of an electromagnetic system that can be incorporated into a graphical display to provide computer-controlled planar feedback forces on the tip of a stylus or fingertip-mounted magnet held near the display surface, according to the magnet position and virtual fixtures implemented in software. An array of magnetometer sensors is used to detect the position of the magnet, while a pair of box-shaped coils behind the display produces feedback forces on the stylus parallel to the plane of the display. Electromagnetic analysis for the system design is presented and system implementation is described. Validation results are given for force generation within a 100 mm × 100 mm area and force interaction with a virtual obstacle is demonstrated

Contactless Haptic Display Through Magnetic Field Control

Haptic rendering enables people to touch, perceive, and manipulate virtual objects in a virtual environment. Using six cascaded identical hollow disk electromagnets and a small permanent magnet attached to an operator's finger, this paper proposes and develops an untethered haptic interface through magnetic field control. The concentric hole inside the six cascaded electromagnets provides the workspace, where the 3D position of the permanent magnet is tracked with a Microsoft Kinect sensor. The driving currents of six cascaded electromagnets are calculated in real-time for generating the desired magnetic force. Offline data from an FEA (finite element analysis) based simulation, determines the relationship between the magnetic force, the driving currents, and the position of the permanent magnet. A set of experiments including the virtual object recognition experiment, the virtual surface identification experiment, and the user perception evaluation experiment were conducted to demonstrate the proposed system, where Microsoft HoloLens holographic glasses are used for visual rendering. The proposed magnetic haptic display leads to an untethered and non-contact interface for natural haptic rendering applications, which overcomes the constraints of mechanical linkages in tool-based traditional haptic devices

Electromagnetic Position Sensing and Force Feedback for a Magnetic Stylus with an Interactive Display

This letter describes the design, implementation, validation, and demonstration of an electromagnetic system that can be incorporated into a graphical display to provide computer-controlled planar feedback forces on the tip of a stylus or fingertip-mounted magnet held near the display surface, according to the magnet position and virtual fixtures implemented in software. An array of magnetometer sensors is used to detect the position of the magnet, while a pair of box-shaped coils behind the display produces feedback forces on the stylus parallel to the plane of the display. Electromagnetic analysis for the system design is presented and system implementation is described. Validation results are given for force generation within a 100 mm × 100 mm area and force interaction with a virtual obstacle is demonstrated

A Magnetic Localization Technique Designed for use with Magnetic Levitation Systems.

M.S. Thesis. University of Hawaiʻi at Mānoa 2017

Bilateral Macro-Micro Teleoperation Using A Magnetic Actuation Mechanism

In recent years, there has been increasing interest in the advancement of microrobotic systems in micro-engineering, micro-fabrication, biological research and biomedical applications. Untethered magnetic-based microrobotic systems are one of the most widely developing groups of microrobotic systems that have been extensively explored for biological and biomedical micro-manipulations. These systems show promise in resolving problems related to on-board power supply limitations as well as mechanical contact sealing and lubrication. In this thesis, a high precision magnetic untethered microrobotic system is demonstrated for micro-handling tasks. A key aspect of the proposed platform concerns the integration of magnetic levitation technology and bilateral macro-micro teleoperation for human intervention to avoid imperceptible failures in poorly observed micro-domain environments. The developed platform has three basic subsystems: a magnetic untethered microrobotic system (MUMS), a haptic device, and a scaled bilateral teleoperation system. The MUMS produces and regulates a magnetic field for non-contact propelling of a microrobot. In order to achieve a controlled motion of the magnetically levitated microrobot, a mathematical force model of the magnetic propulsion mechanism is developed and used to design various control systems. In the workspace of 30 × 32 × 32 mm 3, both PID and LQG\LTR controllers perform similarly the position accuracy of 10 µ m in a vertical direction and 2 µ m in a horizontal motion. The MUMS is equipped with an eddy-current damper to enhance its inherent damping factor in the microrobot's horizontal motions. This paper deals with the modeling and analysis of an eddy-current damper that is formed by a conductive plate placed below the levitated microrobot to overcome inherent dynamical vibrations and improve motion precision. The modeling of eddy-current distribution in the conductive plate is investigated by solving the diffusion equation for vector magnetic potential, and an analytical expression for the horizontal damping force is presented and experimentally validated. It is demonstrated that eddy-current damping is a crucial technique for increasing the damping coefficient in a non-contact way and for improving levitation performance. The damping can be widely used in applications of magnetic actuation systems in micro-manipulation and micro-fabrication. To determine the position of the microrobot in a workspace, the MUMS uses high-accuracy laser sensors. However, laser positioning techniques can only be used in highly transparent environments. A novel technique based on real-time magnetic flux measurement has been proposed for the position estimation of the microrobot in case of laser beam blockage, whereby a combination of Hall-effect sensors is employed to find the microrobot's position in free motion by using the produced magnetic flux. In free motion, the microrobot tends to move toward the horizontally zero magnetic field gradient, Bmax location. As another key feature of the magnetic flux measurement, it was realized that the applied force from the environment to the microrobot can be estimated as linearly proportional to the distance of the microrobot from the Bmax location. The developed micro-domain force estimation method is verified experimentally with an accuracy of 1.27 µ N. A bilateral macro-micro teleoperation technique is employed in the MUMS for the telepresence of a human operator in the task environment. A gain-switching position-position teleoperation scheme is employed and a human operator controls the motion of the microrobot via a master manipulator for dexterous micro-manipulation tasks. The operator can sense a strong force during micro-domain tasks if the microrobot encounters a stiff environment, and the effect of hard contact is fed back to the operator's hand. The position-position method works for both free motion and hard contact. However, to enhance the feeling of a micro-domain environment in the human operator, the scaled force must be transferred to a human, thereby realizing a direct-force-reflection bilateral teleoperation. Additionally, a human-assisted virtual reality interface is developed to improve a human operator's skills in using the haptic-enabled platform, before carrying out an actual dexterous task.1 yea

COMPARATIVE STUDY OF HAPTIC AND VISUAL FEEDBACK FOR KINESTHETIC TRAINING TASKS

Haptics is the sense of simulating and applying the sense of human touch. Application of touch sensations is done with haptic interface devices. The past few years has seen the development of several haptic interface devices with a wide variety of technologies used in their design. This thesis introduces haptic technologies and includes a survey of haptic interface devices and technologies. An improvement in simulating and applying touch sensation when using the Quanser Haptic Wand with proSense is suggested in this work using a novel five degree-of-freedom algorithm. This approach uses two additional torques to enhance the three degree-of-freedom of force feedback currently available with these products. Modern surgical trainers for performing laparoscopic surgery are incorporating haptic feedback in addition to visual feedback for training. This work presents a quantitative comparison of haptic versus visual training. One of the key results of the study is that haptic feedback is better than visual feedback for kinesthetic navigation tasks

Doctor of Philosophy

dissertationFingernail imaging is a method of sensing finger force using the color patterns on the nail and surrounding skin. These patterns form as the underlying tissue is compressed and blood pools in the surrounding vessels. Photos of the finger and surrounding skin may be correlated to the magnitude and direction of force on the fingerpad. An automated calibration routine is developed to improve the data-collection process. This includes a novel hybrid force/position controller that manages the interaction between the fingerpad and a flat surface, implemented on a Magnetic Levitation Haptic Device. The kinematic and dynamics parameters of the system are characterized in order to appropriately design a nonlinear compensator. The controller settles within 0.13 s with less than 30% overshoot. A new registration A new registration technique, based on Active Appearance Models, is presented. Since this method accounts for the variation inherent in the finger, it reduces registration and force prediction errors while removing the need to tune registration parameters or reject unregistered images. Modifications to the standard model are also investigated. The number of landmark points is reduced to 25 points with no loss of accuracy, while the use of the green channel is found to have no significant effect on either registration or force prediction accuracy. Several force prediction models are characterized, and the EigenNail Magnitude Model, a Principal Component Regression model on the gray-level intensity, is shown to fit the data most accurately. The mean force prediction error using this prediction and modeling method is 0.55 N. White LEDs and green LEDs are shown to have no statistically significant effect on registration or force prediction. Finally, two different calibration grid designs are compared and found to have no significant effect. Together, these improvements prepare the way for fingernail imaging to be used in less controlled situations. With a wider range of calibration data and a more robust registration method, a larger range of force data may be predicted. Potential applications for this technology include human-computer interaction and measuring finger interaction forces during grasping experiments

Computed fingertip touch for the instrumental control of musical sound with an excursion on the computed retinal afterimage

In this thesis, we present an articulated, empirical view on what human music making is, and on how this fundamentally relates to computation. The experimental evidence which we obtained seems to indicate that this view can be used as a tool, to systematically generate models, hypotheses and new technologies that enable an ever more complete answer to the fundamental question as to what forms of instrumental control of musical sound are possible to implement. This also entails the development of two novel transducer technologies for computed fingertip touch: The cyclotactor (CT) system, which provides fingerpad-orthogonal force output while tracking surface-orthogonal fingertip movement; and the kinetic surface friction transducer (KSFT) system, which provides fingerpad-parallel force output while tracking surface-parallel fingertip movement. In addition to the main research, the thesis also contains two research excursions, which are due to the nature of the Ph.D. position. The first excursion shows how repeated and varying pressing movements on the already held-down key of a computer keyboard can be used both to simplify existing user interactions and to implement new ones, that allow the rapid yet detailed navigation of multiple possible interaction outcomes. The second excursion shows that automated computational techniques can display shape specifically in the retinal afterimage, a well-known effect in the human visual system.Computer Systems, Imagery and Medi