4,332 research outputs found
Multilevel Converters: An Enabling Technology for High-Power Applications
| Multilevel converters are considered today as the
state-of-the-art power-conversion systems for high-power and
power-quality demanding applications. This paper presents a
tutorial on this technology, covering the operating principle and
the different power circuit topologies, modulation methods,
technical issues and industry applications. Special attention is
given to established technology already found in industry with
more in-depth and self-contained information, while recent
advances and state-of-the-art contributions are addressed with
useful references. This paper serves as an introduction to the
subject for the not-familiarized reader, as well as an update or
reference for academics and practicing engineers working in
the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386
Fast Adaptive Robust Differentiator Based Robust-Adaptive Control of Grid-Tied Inverters with a New L Filter Design Method
In this research, a new nonlinear and adaptive state feedback controller with a fast-adaptive robust differentiator is presented for grid-tied inverters. All parameters and external disturbances are taken as uncertain in the design of the proposed controller without the disadvantages of singularity and over-parameterization. A robust differentiator based on the second order sliding mode is also developed with a fast-adaptive structure to be able to consider the time derivative of the virtual control input. Unlike the conventional backstepping, the proposed differentiator overcomes the problem of explosion of complexity. In the closed-loop control system, the three phase source currents and direct current (DC) bus voltage are assumed to be available for feedback. Using the Lyapunov stability theory, it is proven that the overall control system has the global asymptotic stability. In addition, a new simple L filter design method based on the total harmonic distortion approach is also proposed. Simulations and experimental results show that the proposed controller assurances drive the tracking errors to zero with better performance, and it is robust against all uncertainties. Moreover, the proposed L filter design method matches the total harmonic distortion (THD) aim in the design with the experimental result
The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics
The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future
Circuit Structure and Control Method to Reduce Size and Harmonic Distortion of Interleaved Dual Buck Inverter
A new circuit structure and control method for a high power interleaved dual-buck inverter are proposed. The proposed inverter consists of six switches, four diodes and two inductors, uses a dual-buck structure to eliminate zero-cross distortion, and operates in an interleaved mode to reduce the current stress of switch. To reduce the total harmonic distortion at low output power, the inverter is controlled using discontinuous-current-mode control combined with continuous-current-mode control. The experimental inverter had a power-conversion efficiency of 98.5% at output power = 1300 W and 98.3% at output power = 2 kW, when the inverter was operated at an input voltage of 400 V-DC, output voltage of 220 V-AC/60 Hz, and switching frequency of 20 kHz. The total harmonic distortion was < 0.66%, which demonstrates that the inverter is suitable for high-power dc-ac power conversion.11Ysciescopu
Two-leg three-phase inverter control for STATCOM and SSSC applications
Flexible ac transmission systems (FACTS) devices are attracting an increasing interest both in power system academic research and in electric utilities for their capabilities to improve steady-state performance as well as system stability. Several converter topologies for FACTS applications have been proposed in the recent literature, even if those based upon voltage source inverters (VSI) seem to be more attractive due to their intrinsic capability to rapidly respond to network changes such as perturbations subsequent to a fault and their property of being immune to resonance problem. In this paper, a new topology for inverter-based FACTS is proposed. This configuration, employing a two-leg three-phase inverter is employed for both series and parallel-connected reactive power compensators. The converter utilizes a modular topology for allowing a satisfaction of electronic components rating. A control strategy based on variable structure control technique with sliding mode is employed to track appropriate reference quantities. Design and control, as well as good tracking performances, are also verified through numerical simulations
Distributed control of a fault tolerant modular multilevel inverter for direct-drive wind turbine grid interfacing
Modular generator and converter topologies are being pursued for large offshore wind turbines to achieve fault tolerance and high reliability. A centralized controller presents a single critical point of failure which has prevented a truly modular and fault tolerant system from being obtained. This study analyses the inverter circuit control requirements during normal operation and grid fault ride-through, and proposes a distributed controller design to allow inverter modules to operate independently of each other. All the modules independently estimate the grid voltage magnitude and position, and the modules are synchronised together over a CAN bus. The CAN bus is also used to interleave the PWM switching of the modules and synchronise the ADC sampling. The controller structure and algorithms are tested by laboratory experiments with respect to normal operation, initial synchronization to the grid, module fault tolerance and grid fault ride-through
Suppression of line voltage related distortion in current controlled grid connected inverters
The influence of selected control strategies on the level
of low-order current harmonic distortion generated by an inverter
connected to a distorted grid is investigated through a combination
of theoretical and experimental studies. A detailed theoretical
analysis, based on the concept of harmonic impedance, establishes
the suitability of inductor current feedback versus output
current feedback with respect to inverter power quality. Experimental
results, obtained from a purpose-built 500-W, three-level,
half-bridge inverter with an L-C-L output filter, verify the efficacy of inductor current as the feedback variable, yielding an
output current total harmonic distortion (THD) some 29% lower
than that achieved using output current feedback. A feed-forward
grid voltage disturbance rejection scheme is proposed as a means to
further reduce the level of low-order current harmonic distortion.
Results obtained from an inverter with inductor current feedback
and optimized feed-forward disturbance rejection show a THD of
just 3% at full-load, representing an improvement of some 53% on
the same inverter with output current feedback and no feed-forward
compensation. Significant improvements in THD were also
achieved across the entire load range. It is concluded that the use
of inductor current feedback and feed-forward voltage disturbance
rejection represent cost–effect mechanisms for achieving improved
output current quality
Online control of AC/AC converter based SHEPWM technique
Conventional online control of AC/AC converter controlled by the selective harmonic elimination pulse width modulation technique (SHEPWM) is based on storing the offline calculated switching angle values in a form of lookup table. Then the required switching pattern of certain modulation index (M) is searched through the lookup table. This methodology suffers from limited system flexibility. This paper introduces a novel implementation scheme based on real-time calculation of the required SHEPWM switching pattern with linear control of the fundamental voltage component magnitude based on curve fitting technique for the exact switching angle trajectories. The accuracy of the derived polynomials is evaluated by calculating converter performance parameters using the approximated switching angles solutions obtained from the introduced method and the exact switching angles solutions. Detail of the introduced methodology is presented. Simulation and experimental results have been carried out to confirm the validity of the introduced algorithm
Improved current-regulated delta modulator for reducing switching frequency and low-frequency current error in permanent magnet brushless AC drives
The conventional current-regulated delta modulator (CRDM) results in a high current ripple and a high switching frequency at low rotational speeds, and in low-frequency current harmonics, including a fundamental current error, at high rotational speeds. An improved current controller based on CRDM is proposed which introduces a zero-vector zone and a current error correction technique. It reduces the current ripple and switching frequency at low speeds, without the need to detect the back-emf, as well as the low-frequency error at high speeds. The performance of the modulator is verified by both simulation and measurements on a permanent magnet brushless ac drive
- …