2,537 research outputs found
A new multipath mitigation method for GNSS receivers based on antenna array
the potential of small antenna array for multipath mitigation in GNSS systems is considered in this paper. To discriminate the different incoming signals (Line of sight and multipaths), a new implementation of the well known SAGE algorithm is proposed. This allows a significant complexity reduction and it is fully compatible with conventional GNSS receivers. Theoretical study thanks to the Cramer Rao Bound derivation and tracking simulation results (in static and dynamic scenarios) show that the proposed method is a very promising approach for the multipath mitigation problem in GNSS receivers
Low-Complexity Reduced-Rank Beamforming Algorithms
A reduced-rank framework with set-membership filtering (SMF) techniques is
presented for adaptive beamforming problems encountered in radar systems. We
develop and analyze stochastic gradient (SG) and recursive least squares
(RLS)-type adaptive algorithms, which achieve an enhanced convergence and
tracking performance with low computational cost as compared to existing
techniques. Simulations show that the proposed algorithms have a superior
performance to prior methods, while the complexity is lower.Comment: 7 figure
Direction of Arrival Estimation for Radio Positioning: a Hardware Implementation Perspective
Nowadays multiple antenna wireless systems have gained considerable attention due to their
capability to increase performance. Advances in theory have introduced several new schemes
that rely on multiple antennas and aim to increase data rate, diversity gain, or to provide
multiuser capabilities, beamforming and direction finding (DF) features. In this respect, it
has been shown that a multiple antenna receiver can be potentially used to perform radio
localization by using the direction of arrival (DoA) estimation technique.
In this field, the literature is extensive and gathers the results of almost four decades
of research activities. Among the most cited techniques that have been developed, we find
the so called high-resolution algorithms, such as multiple signal classification (MUSIC), or
estimation of signal parameters via rotational invariance (ESPRIT). Theoretical analysis
as well as simulation results have demonstrated their excellent performance to the point
that they are usually considered as reference for the comparison with other algorithms.
However, such a performance is not necessarily obtained in a real system due to the presence
of non idealities. These can be divided into two categories: the impairments due to the
antenna array, and the impairments due to the multiple radio frequency (RF) and acquisition
front-ends (FEs). The former are strongly influenced by the manufacturing accuracy and,
depending on the required DoA resolution, have to be taken into account. Several works
address these issues in the literature. The multiple FE non idealities, instead, are usually
not considered in the DoA estimation literature, even if they can have a detrimental effect
on the performance. This has motivated the research work in this thesis that addresses the
problem of DoA estimation from a practical implementation perspective, emphasizing the
impact of the hardware impairments on the final performance. This work is substantiated
by measurements done on a state-of-the-art hardware platform that have pointed out the
presence of non idealities such as DC offsets, phase noise (PN), carrier frequency offsets
(CFOs), and phase offsets (POs) among receivers. Particularly, the hardware platform will
be herein described and examined to understand what non idealities can affect the DoA
estimation performance. This analysis will bring to identify which features a DF system
should have to reach certain performance.
Another important issue is the number of antenna elements. In fact, it is usually limited by practical considerations, such as size, costs, and also complexity. However, the most
cited DoA estimation algorithms need a high number of antenna elements, and this does not
yield them suitable to be implemented in a real system. Motivated by this consideration,
the final part of this work will describe a novel DoA estimation algorithm that can be
used when multipath propagation occurs. This algorithm does not need a high number
of antenna elements to be implemented, and it shows good performance despite its low
implementation/computational complexity
Localization and tracking of electronic devices with their unintended emissions
The precise localization and tracking of electronic devices via their unintended emissions has a broad range of commercial and security applications. Active stimulation of the receivers of such devices with a known signal generates very low power unintended emissions. This dissertation presents localization and tracking of multiple devices using both simulation and experimental data in the form of five papers.
First the localization of multiple emitting devices through active stimulation under multipath fading with a Smooth MUSIC based scheme in the near field region is presented. Spatial smoothing helps to separate the correlated sources and the multipath fading and results confirm improved accuracy. A cost effective near-field localization method is proposed next to locate multiple correlated unintended emitting devices under colored noise conditions using two well separated antenna arrays since colored noise in the environment degrades the subspace-based localization techniques.
Subsequently, in order to track moving sources, a near-field scheme by using array output is introduced to monitor direction of arrival (DOA) and the distance between the antenna array and the moving source. The array output, which is a nonlinear function of DOA and distance information, is employed in the Extended Kalman Filter (EKF). In order to show the near- and far-field effect on estimation accuracy, computer simulation results are included for localization and tracking techniques.
Finally, an L-shaped array is constructed and a suite of schemes are introduced for localization and tracking of such devices in the three-dimensional environment. Experimental results for localization and tracking of unintended emissions from single and multiple devices in the near-field environment of an antenna array are demonstrated --Abstract, page iv
DOA estimation and tracking of ULAs with mutual coupling
A class of subspace-based methods for direction-of-arrival (DOA) estimation and tracking in the case of uniform linear arrays (ULAs) with mutual coupling is proposed. By treating the angularly-independent mutual coupling as angularly-dependent complex array gains, the middle subarray is found to have the same complex array gains. Using this property, a new way for parameterizing the steering vector is proposed and the corresponding method for joint estimation of DOAs and mutual coupling matrix (MCM) using the whole array data is derived based on subspace principle. Simulation results show that the proposed algorithm has a better performance than the conventional subarray-based method especially for weak signals. Furthermore, to achieve low computational complexity for online and time-varying DOA estimation, three subspace tracking algorithms with different arithmetic complexities and tracking abilities are developed. More precisely, by introducing a better estimate of the subspace to the conventional tracking algorithms, two modified methods, namely modified projection approximate subspace tracking (PAST) (MPAST) and modified orthonormal PAST (MOPAST), are developed for slowly changing subspace, whereas a Kalman filter with a variable number of measurements (KFVM) method for rapidly changing subspace is introduced. Simulation results demonstrate that these algorithms offer high flexibility and effectiveness for tracking DOAs in the presence of mutual coupling. © 2006 IEEE.published_or_final_versio
- âŠ