732 research outputs found
Plug & Test at System Level via Testable TLM Primitives
With the evolution of Electronic System Level (ESL) design methodologies, we are experiencing an extensive use of Transaction-Level Modeling (TLM). TLM is a high-level approach to modeling digital systems where details of the communication among modules are separated from the those of the implementation of functional units. This paper represents a first step toward the automatic insertion of testing capabilities at the transaction level by definition of testable TLM primitives. The use of testable TLM primitives should help designers to easily get testable transaction level descriptions implementing what we call a "Plug & Test" design methodology. The proposed approach is intended to work both with hardware and software implementations. In particular, in this paper we will focus on the design of a testable FIFO communication channel to show how designers are given the freedom of trading-off complexity, testability levels, and cos
Design for testability method at register transfer level
The testing of sequential circuit is more complex compared to combinational circuit because it needs a sequence of vectors to detect a fault. Its test cost increases with the complexity of the sequential circuit-under-test (CUT). Thus, design for testability (DFT) concept has been introduced to reduce testing complexity, as well as to improve testing effectiveness and efficiency. Scan technique is one of the mostly used DFT method. However, it has cost overhead in terms of area due to the number of added multiplexers for each flip-flop, and test application time due to shifting of test patterns. This research is motivated to introduce non-scan DFT method at register transfer level (RTL) in order to reduce test cost. DFT at RTL level is done based on functional information of the CUT and the connectivity of CUT registers. The process of chaining a register to another register is more effective in terms of area overhead and test application time. The first contribution of this work is the introduction of a non-scan DFT method at the RTL level that considers the information of controllability and observability of CUT that can be extracted from RTL description. It has been proven through simulation that the proposed method has higher fault coverage of around 90%, shorter test application time, shorter test generation time and 10% reduction in area overhead compared to other methods in literature for most benchmark circuits. The second contribution of this work is the introduction of built-in self-test (BIST) method at the RTL level which uses multiple input signature registers (MISRs) as BIST components instead of concurrent built-in logic block observers (CBILBOs). The selection of MISR as test register is based on extended minimum feedback vertex set algorithm. This new BIST method results in lower area overhead by about 32.9% and achieves similar higher fault coverage compared to concurrent BIST method. The introduction of non-scan DFT at the RTL level is done before logic synthesis process. Thus, the testability violations can be fixed without repeating the logic synthesis process during DFT insertion at the RTL level
Recommended from our members
Scalable algorithms for software based self test using formal methods
textTransistor scaling has kept up with Moore's law with a doubling of the number of transistors on a chip. More logic on a chip means more opportunities for manufacturing defects to slip in. This, in turn, has made processor testing after manufacturing a significant challenge. At-speed functional testing, being completely non-intrusive, has been seen as the ideal way of testing chips. However for processor testing, generating instruction level tests for covering all faults is a challenge given the issue of scalability. Data-path faults are relatively easier to control and observe compared to control-path faults. In this research we present a novel method to generate instruction level tests for hard to detect control-path faults in a processor. We initially map the gate level stuck-at fault to the Register Transfer Level (RTL) and build an equivalent faulty RTL model. The fault activation and propagation constraints are captured using Control and Data Flow Graphs of the RTL as a Liner Temporal Logic (LTL) property. This LTL property is then negated and given to a Bounded Model Checker based on a Bit-Vector Satisfiability Module Theories (SMT) solver. From the counter-example to the property we can extract a sequence of instructions that activates the gate level fault and propagates the fault effect to one of the observable points in the design. Other than the user supplying instruction constraints, this approach is completely automatic and does not require any manual intervention. Not all the design behaviors are required to generate a test for a fault. We use this insight to scale our previous methodology further. Underapproximations are design abstractions that only capture a subset of the original design behaviors. The use of RTL for test generation affords us two types of under-approximations: bit-width reduction and operator approximation. These are abstractions that perform reductions based on semantics of the RTL design. We also explore structural reductions of the RTL, called path based search, where we search through error propagation paths incrementally. This approach increases the size of the test generation problem step by step. In this way the SMT solver searches through the state space piecewise rather than doing the entire search at once. Experimental results show that our methods are robust and scalable for generating functional tests for hard to detect faults.Electrical and Computer Engineerin
Recommended from our members
Testability considerations for implementing an embedded memory subsystem
textThere are a number of testability considerations for VLSI design,
but test coverage, test time, accuracy of test patterns and
correctness of design information for DFD (Design for debug) are
the most important ones in design with embedded memories. The goal
of DFT (Design-for-Test) is to achieve zero defects. When it comes
to the memory subsystem in SOCs (system on chips), many flavors of
memory BIST (built-in self test) are able to get high test
coverage in a memory, but often, no proper attention is given to
the memory interface logic (shadow logic). Functional testing and
BIST are the most prevalent tests for this logic, but functional
testing is impractical for complicated SOC designs. As a result,
industry has widely used at-speed scan testing to detect delay
induced defects. Compared with functional testing, scan-based
testing for delay faults reduces overall pattern generation
complexity and cost by enhancing both controllability and
observability of flip-flops. However, without proper modeling of
memory, Xs are generated from memories. Also, when the design has
chip compression logic, the number of ATPG patterns is increased
significantly due to Xs from memories. In this dissertation, a
register based testing method and X prevention logic are presented
to tackle these problems.
An important design stage for scan based testing with memory
subsystems is the step to create a gate level model and verify
with this model. The flow needs to provide a robust ATPG netlist
model. Most industry standard CAD tools used to analyze fault
coverage and generate test vectors require gate level models.
However, custom embedded memories are typically designed using a
transistor-level flow, there is a need for an abstraction step to
generate the gate models, which must be equivalent to the actual
design (transistor level). The contribution of the research is a
framework to verify that the gate level representation of custom
designs is equivalent to the transistor-level design.
Compared to basic stuck-at fault testing, the number of patterns
for at-speed testing is much larger than for basic stuck-at fault
testing. So reducing test and data volume are important. In this
desertion, a new scan reordering method is introduced to reduce
test data with an optimal routing solution. With in depth
understanding of embedded memories and flows developed during the
study of custom memory DFT, a custom embedded memory Bit Mapping
method using a symbolic simulator is presented in the last chapter
to achieve high yield for memories.Electrical and Computer Engineerin
Design and debugging of multi-step analog to digital converters
With the fast advancement of CMOS fabrication technology, more and more signal-processing functions are implemented in the digital domain for a lower cost, lower power consumption, higher yield, and higher re-configurability. The trend of increasing integration level for integrated circuits has forced the A/D converter interface to reside on the same silicon in complex mixed-signal ICs containing mostly digital blocks for DSP and control. However, specifications of the converters in various applications emphasize high dynamic range and low spurious spectral performance. It is nontrivial to achieve this level of linearity in a monolithic environment where post-fabrication component trimming or calibration is cumbersome to implement for certain applications or/and for cost and manufacturability reasons. Additionally, as CMOS integrated circuits are accomplishing unprecedented integration levels, potential problems associated with device scaling – the short-channel effects – are also looming large as technology strides into the deep-submicron regime. The A/D conversion process involves sampling the applied analog input signal and quantizing it to its digital representation by comparing it to reference voltages before further signal processing in subsequent digital systems. Depending on how these functions are combined, different A/D converter architectures can be implemented with different requirements on each function. Practical realizations show the trend that to a first order, converter power is directly proportional to sampling rate. However, power dissipation required becomes nonlinear as the speed capabilities of a process technology are pushed to the limit. Pipeline and two-step/multi-step converters tend to be the most efficient at achieving a given resolution and sampling rate specification. This thesis is in a sense unique work as it covers the whole spectrum of design, test, debugging and calibration of multi-step A/D converters; it incorporates development of circuit techniques and algorithms to enhance the resolution and attainable sample rate of an A/D converter and to enhance testing and debugging potential to detect errors dynamically, to isolate and confine faults, and to recover and compensate for the errors continuously. The power proficiency for high resolution of multi-step converter by combining parallelism and calibration and exploiting low-voltage circuit techniques is demonstrated with a 1.8 V, 12-bit, 80 MS/s, 100 mW analog to-digital converter fabricated in five-metal layers 0.18-µm CMOS process. Lower power supply voltages significantly reduce noise margins and increase variations in process, device and design parameters. Consequently, it is steadily more difficult to control the fabrication process precisely enough to maintain uniformity. Microscopic particles present in the manufacturing environment and slight variations in the parameters of manufacturing steps can all lead to the geometrical and electrical properties of an IC to deviate from those generated at the end of the design process. Those defects can cause various types of malfunctioning, depending on the IC topology and the nature of the defect. To relive the burden placed on IC design and manufacturing originated with ever-increasing costs associated with testing and debugging of complex mixed-signal electronic systems, several circuit techniques and algorithms are developed and incorporated in proposed ATPG, DfT and BIST methodologies. Process variation cannot be solved by improving manufacturing tolerances; variability must be reduced by new device technology or managed by design in order for scaling to continue. Similarly, within-die performance variation also imposes new challenges for test methods. With the use of dedicated sensors, which exploit knowledge of the circuit structure and the specific defect mechanisms, the method described in this thesis facilitates early and fast identification of excessive process parameter variation effects. The expectation-maximization algorithm makes the estimation problem more tractable and also yields good estimates of the parameters for small sample sizes. To allow the test guidance with the information obtained through monitoring process variations implemented adjusted support vector machine classifier simultaneously minimize the empirical classification error and maximize the geometric margin. On a positive note, the use of digital enhancing calibration techniques reduces the need for expensive technologies with special fabrication steps. Indeed, the extra cost of digital processing is normally affordable as the use of submicron mixed signal technologies allows for efficient usage of silicon area even for relatively complex algorithms. Employed adaptive filtering algorithm for error estimation offers the small number of operations per iteration and does not require correlation function calculation nor matrix inversions. The presented foreground calibration algorithm does not need any dedicated test signal and does not require a part of the conversion time. It works continuously and with every signal applied to the A/D converter. The feasibility of the method for on-line and off-line debugging and calibration has been verified by experimental measurements from the silicon prototype fabricated in standard single poly, six metal 0.09-µm CMOS process
Design-for-delay-testability techniques for high-speed digital circuits
The importance of delay faults is enhanced by the ever increasing clock rates and decreasing geometry sizes of nowadays' circuits. This thesis focuses on the development of Design-for-Delay-Testability (DfDT) techniques for high-speed circuits and embedded cores. The rising costs of IC testing and in particular the costs of Automatic Test Equipment are major concerns for the semiconductor industry. To reverse the trend of rising testing costs, DfDT is\ud
getting more and more important
Cost modelling and concurrent engineering for testable design
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.As integrated circuits and printed circuit boards increase in complexity, testing becomes a major cost factor of the design and production of the complex devices. Testability has to be considered during the design of complex electronic systems, and automatic test systems have to be used in order to facilitate the test. This fact is now widely accepted in industry. Both design for testability and the usage of automatic test systems aim at reducing the cost of production testing or, sometimes, making it possible at all. Many design for testability methods and test systems are available which can be configured into a production test strategy, in order to achieve high quality of the final product. The designer has to select from the various options for creating a test strategy, by maximising the quality and minimising the total cost for the electronic system.
This thesis presents a methodology for test strategy generation which is based on consideration of the economics during the life cycle of the electronic system. This methodology is a concurrent engineering approach which takes into account all effects of a test strategy on the electronic system during its life cycle by evaluating its related cost. This objective methodology is used in an original test strategy planning advisory system, which allows for test strategy planning for VLSI circuits as well as for digital electronic systems.
The cost models which are used for evaluating the economics of test strategies are described in detail and the test strategy planning system is presented. A methodology for making decisions which are based on estimated costing data is presented. Results of using the cost models and the test strategy planning system for evaluating the economics of test strategies for selected industrial designs are presented
FPGA ARCHITECTURE AND VERIFICATION OF BUILT IN SELF-TEST (BIST) FOR 32-BIT ADDER/SUBTRACTER USING DE0-NANO FPGA AND ANALOG DISCOVERY 2 HARDWARE
The integrated circuit (IC) is an integral part of everyday modern technology, and its application is very attractive to hardware and software design engineers because of its versatility, integration, power consumption, cost, and board area reduction. IC is available in various types such as Field Programming Gate Array (FPGA), Application Specific Integrated Circuit (ASIC), System on Chip (SoC) architecture, Digital Signal Processing (DSP), microcontrollers (ÎĽC), and many more. With technology demand focused on faster, low power consumption, efficient IC application, design engineers are facing tremendous challenges in developing and testing integrated circuits that guaranty functionality, high fault coverage, and reliability as the transistor technology is shrinking to the point where manufacturing defects of ICs are affecting yield which associates with the increased cost of the part. The competitive IC market is pressuring manufactures of ICs to develop and market IC in a relatively quick turnaround which in return requires design and verification engineers to develop an integrated self-test structure that would ensure fault-free and the quality product is delivered on the market. 70-80% of IC design is spent on verification and testing to ensure high quality and reliability for the enduser. To test complex and sophisticated IC designs, the verification engineers must produce laborious and costly test fixtures which affect the cost of the part on the competitive market. To avoid increasing the part cost due to yield and test time to the end-user and to keep up with the competitive market many IC design engineers are deviating from complex external test fixture approach and are focusing on integrating Built-in Self-Test (BIST) or Design for Test
(DFT) techniques onto IC’s which would reduce time to market but still guarantee high coverage for the product. Understanding the BIST, the architecture, as well as the application of IC, must be understood before developing IC. The architecture of FPGA is elaborated in this paper followed by several BIST techniques and applications of those BIST relative to FPGA, SoC, analog to digital (ADC), or digital to analog converters (DAC) that are integrated on IC. Paper is concluded with verification of BIST for the 32-bit adder/subtracter designed in Quartus II software using the Analog Discovery 2 module as stimulus and DE0-NANO FPGA board for verification
A Flexible Framework for the Automatic Generation of SBST Programs
Software-based self-test (SBST) techniques are used to test processors and processor cores against permanent faults introduced by the manufacturing process or to perform in-field test in safety-critical applications. However, the generation of an SBST program is usually associated with high costs as it requires significant manual effort of a skilled engineer with in-depth knowledge about the processor under test. In this paper, we propose an approach for the automatic generation of SBST programs. First, we detail an automatic test pattern generation (ATPG) framework for the generation of functional test sequences. Second, we describe the extension of this framework with the concept of a validity checker module (VCM), which allows the specification of constraints with regard to the generated sequences. Third, we use the VCM to express typical constraints that exist when SBST is adopted for in-field test. In our experimental results, we evaluate the proposed approach with a microprocessor without interlocked pipeline stages (MIPS)-like microprocessor. The results show that the proposed method is the first approach able to automatically generate SBST programs for both end-of-manufacturing and in-field test whose fault efficiency is superior to those produced by state-of-the-art manual approaches
Studies on Core-Based Testing of System-on-Chips Using Functional Bus and Network-on-Chip Interconnects
The tests of a complex system such as a microprocessor-based system-onchip
(SoC) or a network-on-chip (NoC) are difficult and expensive. In this thesis,
we propose three core-based test methods that reuse the existing functional
interconnects-a flat bus, hierarchical buses of multiprocessor SoC's (MPSoC),
and a N oC-in order to avoid the silicon area cost of a dedicated test access mechanism
(TAM). However, the use of functional interconnects as functional TAM's
introduces several new problems.
During tests, the interconnects-including the bus arbitrator, the bus bridges,
and the NoC routers-operate in the functional mode to transport the test stimuli
and responses, while the core under tests (CUT) operate in the test mode. Second,
the test data is transported to the CUT through the functional bus, and not
directly to the test port. Therefore, special core test wrappers that can provide
the necessary control signals required by the different functional interconnect are
proposed. We developed two types of wrappers, one buffer-based wrapper for the
bus-based systems and another pair of complementary wrappers for the NoCbased
systems.
Using the core test wrappers, we propose test scheduling schemes for the three
functionally different types of interconnects. The test scheduling scheme for a flat
bus is developed based on an efficient packet scheduling scheme that minimizes
both the buffer sizes and the test time under a power constraint. The schedulingscheme is then extended to take advantage of the hierarchical bus architecture of
the MPSoC systems. The third test scheduling scheme based on the bandwidth
sharing is developed specifically for the NoC-based systems. The test scheduling
is performed under the objective of co-optimizing the wrapper area cost and the
resulting test application time using the two complementary NoC wrappers.
For each of the proposed methodology for the three types of SoC architec ..
ture, we conducted a thorough experimental evaluation in order to verify their
effectiveness compared to other methods
- …