1,153 research outputs found
A Low Energy FPGA Platform for Real-Time Event-Based Control
We present a wireless sensor node suitable for event-based real-time control networks. The node achieves low-power operation thanks to tight clock synchronisation with the network master (at present we refer to a star network but extensions are envisaged). Also, the node does not employ any programmable device but rather an FPGA, thus being inherently immune to attacks based on code tampering. Experimental results on a simple laboratory apparatus are presented
Recommended from our members
Security-based resilient event-triggered control of networked control systems under denial of service attacks
This paper is concerned with the security control problem of the networked control system (NCSs) subjected to denial of service (DoS) attacks. In order to guarantee the security performance, this paper treats the influence of packet dropouts due to DoS attacks as a uncertainty of triggering condition. Firstly, a novel resilient triggering strategy by considering the uncertainty of triggering condition caused by DoS attacks is proposed. Secondly, the event-based security controller under the resilient triggering strategy is designed while the DoS-based security performance is preserved. At last, the simulation results show that the proposed resilient triggering strategy is resilient to DoS attacks while guaranteing the security performance
Dynamics analysis and integrated design of real-time control systems
Real-time control systems are widely deployed in many applications. Theory and practice for the design and deployment of real-time control systems have evolved significantly. From the design perspective, control strategy development has been the focus of the research in the control community. In order to develop good control strategies, process modelling and analysis have been investigated for decades, and stability analysis and model-based control have been heavily studied in the literature. From the implementation perspective, real-time control systems require timeliness and predictable timing behaviour in addition to logical correctness, and a real-time control system may behave very differently with different software implementations of the control strategies on a digital controller, which typically has limited computing resources. Most current research activities on software implementations concentrate on various scheduling methodologies to ensure the schedulability of multiple control tasks in constrained environments. Recently, more and more real-time control systems are implemented over data networks, leading to increasing interest worldwide in the design and implementation of networked control systems (NCS). Major research activities in NCS include control-oriented and scheduling-oriented investigations. In spite of significant progress in the research and development of real-time control systems, major difficulties exist in the state of the art. A key issue is the lack of integrated design for control development and its software implementation. For control design, the model-based control technique, the current focus of control research, does not work when a good process model is not available or is too complicated for control design. For control implementation on digital controllers running multiple tasks, the system schedulability is essential but is not enough; the ultimate objective of satisfactory quality-of-control (QoC) performance has not been addressed directly. For networked control, the majority of the control-oriented investigations are based on two unrealistic assumptions about the network induced delay. The scheduling-oriented research focuses on schedulability and does not directly link to the overall QoC of the system. General solutions with direct QoC consideration from the network perspective to the challenging problems of network delay and packet dropout in NCS have not been found in the literature. This thesis addresses the design and implementation of real-time control systems with regard to dynamics analysis and integrated design. Three related areas have been investigated, namely control development for controllers, control implementation and scheduling on controllers, and real-time control in networked environments. Seven research problems are identified from these areas for investigation in this thesis, and accordingly seven major contributions have been claimed. Timing behaviour, quality of control, and integrated design for real-time control systems are highlighted throughout this thesis. In control design, a model-free control technique, pattern predictive control, is developed for complex reactive distillation processes. Alleviating the requirement of accurate process models, the developed control technique integrates pattern recognition, fuzzy logic, non-linear transformation, and predictive control into a unified framework to solve complex problems. Characterising the QoC indirectly with control latency and jitter, scheduling strategies for multiple control tasks are proposed to minimise the latency and/or jitter. Also, a hierarchical, QoC driven, and event-triggering feedback scheduling architecture is developed with plug-ins of either the earliest-deadline-first or fixed priority scheduling. Linking to the QoC directly, the architecture minimises the use of computing resources without sacrifice of the system QoC. It considers the control requirements, but does not rely on the control design. For real-time NCS, the dynamics of the network delay are analysed first, and the nonuniform distribution and multi-fractal nature of the delay are revealed. These results do not support two fundamental assumptions used in existing NCS literature. Then, considering the control requirements, solutions are provided to the challenging NCS problems from the network perspective. To compensate for the network delay, a real-time queuing protocol is developed to smooth out the time-varying delay and thus to achieve more predictable behaviour of packet transmissions. For control packet dropout, simple yet effective compensators are proposed. Finally, combining the queuing protocol, the packet loss compensation, the configuration of the worst-case communication delay, and the control design, an integrated design framework is developed for real-time NCS. With this framework, the network delay is limited to within a single control period, leading to simplified system analysis and improved QoC
Modelação e simulação de equipamentos de rede para Indústria 4.0
Currently, the industrial sector has increasingly opted for digital technologies
in order to automate all its processes. This development comes from
notions like Industry 4.0 that redefines the way these systems are designed.
Structurally, all the components of these systems are connected in a complex
network known as the Industrial Internet of Things. Certain requirements
arise from this concept regarding industrial communication networks. Among
them, the need to ensure real-time communications, as well as support for
dynamic resource management, are extremely relevant. Several research
lines pursued to develop network technologies capable of meeting such
requirements. One of these protocols is the Hard Real-Time Ethernet Switch
(HaRTES), an Ethernet switch with support for real-time communications and
dynamic resource management, requirements imposed by Industry 4.0.
The process of designing and implementing industrial networks can,
however, be quite time consuming and costly. These aspects impose
limitations on testing large networks, whose level of complexity is higher and
requires the usage of more hardware. The utilization of network simulators
stems from the necessity to overcome such restrictions and provide tools to
facilitate the development of new protocols and evaluation of communications
networks.
In the scope of this dissertation a HaRTES switch model was developed
in the OMNeT++ simulation environment. In order to demonstrate a
solution that can be employed in industrial real-time networks, this dissertation
presents the fundamental aspects of the implemented model as well as a set
of experiments that compare it with an existing laboratory prototype, with the
objective of validating its implementation.Atualmente o setor industrial tem vindo cada vez mais a optar por tecnologias
digitais de forma a automatizar todos os seus processos. Este desenvolvimento
surge de noções como Indústria 4.0, que redefine o modo de como
estes sistemas são projetados. Estruturalmente, todos os componentes
destes sistemas encontram-se conectados numa rede complexa conhecida
como Internet Industrial das Coisas. Certos requisitos advêm deste conceito,
no que toca às redes de comunicação industriais, entre os quais se destacam
a necessidade de garantir comunicações tempo-real bem como suporte a
uma gestão dinâmica dos recursos, os quais são de extrema importância.
Várias linhas de investigação procuraram desenvolver tecnologias de rede
capazes de satisfazer tais exigências. Uma destas soluções é o "Hard
Real-Time Ethernet Switch" (HaRTES), um switch Ethernet com suporte a
comunicações de tempo-real e gestão dinâmica de Qualidade-de-Serviço
(QoS), requisitos impostos pela Indústria 4.0.
O processo de projeto e implementação de redes industriais pode, no
entanto, ser bastante moroso e dispendioso. Tais aspetos impõem limitações
no teste de redes de largas dimensões, cujo nível de complexidade é
mais elevado e requer o uso de mais hardware. Os simuladores de redes
permitem atenuar o impacto de tais limitações, disponibilizando ferramentas
que facilitam o desenvolvimento de novos protocolos e a avaliação de redes
de comunicações.
No âmbito desta dissertação desenvolveu-se um modelo do switch HaRTES
no ambiente de simulação OMNeT++. Com um objetivo de demonstrar uma
solução que possa ser utilizada em redes de tempo-real industriais, esta
dissertação apresenta os aspetos fundamentais do modelo implementado
bem como um conjunto de experiências que o comparam com um protótipo
laboratorial já existente, no âmbito da sua validação.Mestrado em Engenharia Eletrónica e Telecomunicaçõe
- …