Multi-Channel Scheduling for Fast Convergecast in Wireless Sensor Networks

We explore the following fundamental question - how fast can information be collected from a wireless sensor network? We consider a number of design parameters such as, power control, time and frequency scheduling, and routing. There are essentially two factors that hinder efficient data collection - interference and the half-duplex single-transceiver radios. We show that while power control helps in reducing the number of transmission slots to complete a convergecast under a single frequency channel, scheduling transmissions on different frequency channels is more efficient in mitigating the effects of interference (empirically, 6 channels suffice for most 100-node networks). With these observations, we define a receiver-based channel assignment problem, and prove it to be NP-complete on general graphs. We then introduce a greedy channel assignment algorithm that efficiently eliminates interference, and compare its performance with other existing schemes via simulations. Once the interference is completely eliminated, we show that with half-duplex single-transceiver radios the achievable schedule length is lower-bounded by max(2nk − 1,N), where nk is the maximum number of nodes on any subtree and N is the number of nodes in the network. We modify an existing distributed time slot assignment algorithm to achieve this bound when a suitable balanced routing scheme is employed. Through extensive simulations, we demonstrate that convergecast can be completed within up to 50% less time slots, in 100-node networks, using multiple channels as compared to that with single-channel communication. Finally, we also demonstrate further improvements that are possible when the sink is equipped with multiple transceivers or when there are multiple sinks to collect data

Exploiting partial reconfiguration through PCIe for a microphone array network emulator

The current Microelectromechanical Systems (MEMS) technology enables the deployment of relatively low-cost wireless sensor networks composed of MEMS microphone arrays for accurate sound source localization. However, the evaluation and the selection of the most accurate and power-efficient network’s topology are not trivial when considering dynamic MEMS microphone arrays. Although software simulators are usually considered, they consist of high-computational intensive tasks, which require hours to days to be completed. In this paper, we present an FPGA-based platform to emulate a network of microphone arrays. Our platform provides a controlled simulated acoustic environment, able to evaluate the impact of different network configurations such as the number of microphones per array, the network’s topology, or the used detection method. Data fusion techniques, combining the data collected by each node, are used in this platform. The platform is designed to exploit the FPGA’s partial reconfiguration feature to increase the flexibility of the network emulator as well as to increase performance thanks to the use of the PCI-express high-bandwidth interface. On the one hand, the network emulator presents a higher flexibility by partially reconfiguring the nodes’ architecture in runtime. On the other hand, a set of strategies and heuristics to properly use partial reconfiguration allows the acceleration of the emulation by exploiting the execution parallelism. Several experiments are presented to demonstrate some of the capabilities of our platform and the benefits of using partial reconfiguration

Cross-layer design of multi-hop wireless networks

MULTI -hop wireless networks are usually defined as a collection of nodes equipped with radio transmitters, which not only have the capability to communicate each other in a multi-hop fashion, but also to route each others’ data packets. The distributed nature of such networks makes them suitable for a variety of applications where there are no assumed reliable central entities, or controllers, and may significantly improve the scalability issues of conventional single-hop wireless networks. This Ph.D. dissertation mainly investigates two aspects of the research issues related to the efficient multi-hop wireless networks design, namely: (a) network protocols and (b) network management, both in cross-layer design paradigms to ensure the notion of service quality, such as quality of service (QoS) in wireless mesh networks (WMNs) for backhaul applications and quality of information (QoI) in wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of this Ph.D. dissertation, different network settings are used as illustrative examples, however the proposed algorithms, methodologies, protocols, and models are not restricted in the considered networks, but rather have wide applicability. First, this dissertation proposes a cross-layer design framework integrating a distributed proportional-fair scheduler and a QoS routing algorithm, while using WMNs as an illustrative example. The proposed approach has significant performance gain compared with other network protocols. Second, this dissertation proposes a generic admission control methodology for any packet network, wired and wireless, by modeling the network as a black box, and using a generic mathematical 0. Abstract 3 function and Taylor expansion to capture the admission impact. Third, this dissertation further enhances the previous designs by proposing a negotiation process, to bridge the applications’ service quality demands and the resource management, while using WSNs as an illustrative example. This approach allows the negotiation among different service classes and WSN resource allocations to reach the optimal operational status. Finally, the guarantees of the service quality are extended to the environment of multiple, disconnected, mobile subnetworks, where the question of how to maintain communications using dynamically controlled, unmanned data ferries is investigated

Data Collection and Capacity Analysis in Large-scale Wireless Sensor Networks

In this dissertation, we study data collection and its achievable network capacity in Wireless Sensor Networks (WSNs). Firstly, we investigate the data collection issue in dual-radio multi-channel WSNs under the protocol interference model. We propose a multi-path scheduling algorithm for snapshot data collection, which has a tighter capacity bound than the existing best result, and a novel continuous data collection algorithm with comprehensive capacity analysis. Secondly, considering most existing works for the capacity issue are based on the ideal deterministic network model, we study the data collection problem for practical probabilistic WSNs. We design a cell-based path scheduling algorithm and a zone-based pipeline scheduling algorithm for snapshot and continuous data collection in probabilistic WSNs, respectively. By analysis, we show that the proposed algorithms have competitive capacity performance compared with existing works. Thirdly, most of the existing works studying the data collection capacity issue are for centralized synchronous WSNs. However, wireless networks are more likely to be distributed asynchronous systems. Therefore, we investigate the achievable data collection capacity of realistic distributed asynchronous WSNs and propose a data collection algorithm with fairness consideration. Theoretical analysis of the proposed algorithm shows that its achievable network capacity is order-optimal as centralized and synchronized algorithms do and independent of network size. Finally, for completeness, we study the data aggregation issue for realistic probabilistic WSNs. We propose order-optimal scheduling algorithms for snapshot and continuous data aggregation under the physical interference model

Does Compressed Sensing Improve the Throughput of Wireless Sensor Networks?

Although compressed sensing (CS) has been envisioned as a useful technique to improve the performance of wireless sensor networks (WSNs), it is still not very clear how exactly it will be applied and how big the improvements will be. In this paper, we propose two different ways (plain-CS and hybrid-CS) of applying CS to WSNs at the networking layer, in the form of a particular data aggregation mechanism. We formulate three flow-based optimization problems to compute the throughput of the non-CS, plain-CS, and hybrid-CS schemes. We provide the exact solution to the first problem corresponding to the non-CS case and lower bounds for the cases with CS. Our preliminary numerical results are only for a low-power regime. They illustrate two crucial insights: first, applying CS naively may not bring any improvement, and secondly, our hybrid-CS can achieve significant improvement in throughput.Published versio