2,507 research outputs found
Pseudo-Stereo Audio Processor
Due to both technical and resource limitations, non-professional audio production must often record with a single microphone, creating a mono audio signal. Even some originally multi-channel audio files often combine the separate channels into a single channel to save memory. However, this channel limitation makes any music held within the audio duller during listening. The Pseudo-Stereo Audio Processor remedies this situation, introducing a quadrature phase shift onto a given single-channel audio signal, producing multiple phase shifted output signals. These separate fixed-phase output signals are then recombined to produce a variable phase difference, emulated two-channel version of the input signal, allowing for an easy post-production sound quality enhancement of a single-channel signal that independent or small-scale audio recording studios could utilize. Further, this method of quadrature filtering produces completely decorrelated output signals using a Hilbert Transform, creating unique auditory effects useful in certain aspects of psychoacoustic research much harder to obtain through other means
Study and design of an interface for remote audio processing
This project focused on the study and design of an interface for remote audio processing, with the objective of acquiring by filtering, biasing, and amplifying an analog
signal before digitizing it by means of two MCP3208 ADCs to achieve a 24-bit resolution signal. The resulting digital signal was then transmitted to a Raspberry Pi
using SPI protocol, where it was processed by a Flask server that could be accessed
from both local and remote networks.
The design of the PCB was a critical component of the project, as it had to accommodate various components and ensure accurate signal acquisition and transmission.
The PCB design was created using KiCad software, which allowed for the precise
placement and routing of all components. A major challenge in the design of the interface was to ensure that the analog signal was not distorted during acquisition and
amplification. This was achieved through careful selection of amplifier components
and using high-pass and low-pass filters to remove any unwanted noise.
Once the analog signal was acquired and digitized, the resulting digital signal was
transmitted to the Raspberry Pi using SPI protocol. The Raspberry Pi acted as
the host for a Flask server, which could be accessed from local and remote networks
using a web browser. The Flask server allowed for the processing of the digital signal
and provided a user interface for controlling the gain and filtering parameters of the
analog signal. This enabled the user to adjust the signal parameters to suit their
specific requirements, making the interface highly flexible and adaptable to a variety
of audio processing applications.
The final interface was capable of remote audio processing, making it highly useful
in scenarios where the audio signal needed to be acquired and processed in a location
separate from the user. For example, it could be used in a recording studio, where the
audio signal from the microphone could be remotely processed using the interface.
The gain and filtering parameters could be adjusted in real-time, allowing the sound
engineer to fine-tune the audio signal to produce the desired recording.
In conclusion, the project demonstrated the feasibility and potential benefits of
using a remote audio processing system for various applications. The design of the
PCB, selection of components, and use of the Flask server enabled the creation of
an interface that was highly flexible, accurate, and adaptable to a variety of audio
processing requirements. Overall, the project represents a significant step forward
in the field of remote audio processing, with the potential to benefit many different
applications in the future
Construction of a radiofrequency wireless system for electric energy transmission
ĐąĐE PURPOSE. The objective of this study is to investigate the possibilities of longer distance resonant energy transmission applying Wireless Power Transfer (WPT) in the MHz frequency range. The planned final purpose is the energy to be transferred to all types (aerial and terrestrial) of electric vehicles (EV), mainly for the battery charging at a larger distance, compared to the normal dis-tances of WPT in use at this moment. The key to this type of High Frequency (HF) WPT system is the strong resonant inductive coupling. METHODS. This project is based on the HF power oscillations generating equipment, which original function is to generate several kW of power at MHz frequency for welding of acrylic or other plastic details. RESULTS. As a first step, the equipment was modified to supply HF power for the WPT transmitter coil, instead of supplying power to the soldering plates. The operation frequency is defined by the factory, and it is made now regulable between 8 and 14 MHz by introducing a vacuum variable capacitor. The internal powerful oscillator is based on the electronic vacuum tube ITL 5-1, a military type, capable to deliver up to 3.5 kW active power at the output. The original output had a coaxial form for supplying finally the capacitive load of the dielectric welder. This had to be reworked and a resonant loop, i.e., a capacitively compensated transmitting coil, is now connected. The intended application of this HF system is to charge the batteries of a public transport EV, possibly during its periodic stops, while the passengers will enter and leave. CONCLUSION. The applied frequency is relatively high and the distances are larger, this system still uses the magnetic field as the energy transporter, i.e., it is a near field transmission, a non-radiating system, and is expected not to produce adverse effects on the human beingâs health, or to achieve a safe protection from the field
Recent advances in the hardware architecture of flat display devices
Thesis (Master)--Izmir Institute of Technology, Electronics and Communication Engineering, Izmir, 2007Includes bibliographical References (leaves: 115-117)Text in English; Abstract: Turkish and Englishxiii, 133 leavesThesis will describe processing board hardware design for flat panel displays with integrated digital reception, the design challenges in flat panel displays with integrated digital reception explained with details. Thesis also includes brief explanation of flat panel technology and processing blocks. Explanations of building blocks of TV and flat panel displays are given before design stage for better understanding of design stage. Hardware design stage of processing board is investigated in two major steps, schematic design and layout design. First step of the schematic design is system level block diagram design. Schematic diagram is the detailed application level hardware design and layout is the implementation level of the design. System level, application level and implementation level hardware design of the TV processing board is described with details in thesis. Design challenges, considerations and solutions are defined in advance for flat panel displays
Advanced automatic mixing tools for music
PhDThis thesis presents research on several independent systems that when
combined together can generate an automatic sound mix out of an unknown set
of multiâchannel inputs. The research explores the possibility of reproducing
the mixing decisions of a skilled audio engineer with minimal or no human
interaction. The research is restricted to nonâtime varying mixes for large room
acoustics. This research has applications in dynamic sound music concerts,
remote mixing, recording and postproduction as well as live mixing for
interactive scenes.
Currently, automated mixers are capable of saving a set of static mix
scenes that can be loaded for later use, but they lack the ability to adapt to a
different room or to a different set of inputs. In other words, they lack the
ability to automatically make mixing decisions. The automatic mixer research
depicted here distinguishes between the engineering mixing and the subjective
mixing contributions. This research aims to automate the technical tasks related
to audio mixing while freeing the audio engineer to perform the fineâtuning
involved in generating an aestheticallyâpleasing sound mix. Although the
system mainly deals with the technical constraints involved in generating an
audio mix, the developed system takes advantage of common practices
performed by sound engineers whenever possible. The system also makes use
of interâdependent channel information for controlling signal processing tasks
while aiming to maintain system stability at all times. A working
implementation of the system is described and subjective evaluation between a
human mix and the automatic mix is used to measure the success of the
automatic mixing tools
Recommended from our members
ANALOG SIGNAL PROCESSING SOLUTIONS AND DESIGN OF MEMRISTOR-CMOS ANALOG CO-PROCESSOR FOR ACCELERATION OF HIGH-PERFORMANCE COMPUTING APPLICATIONS
Emerging applications in the field of machine vision, deep learning and scientific simulation require high computational speed and are run on platforms that are size, weight and power constrained. With the transistor scaling coming to an end, existing digital hardware architectures will not be able to meet these ever-increasing demands. Analog computation with its rich set of primitives and inherent parallel architecture can be faster, more efficient and compact for some of these applications. The major contribution of this work is to show that analog processing can be a viable solution to this problem. This is demonstrated in the three parts of the dissertation.
In the first part of the dissertation, we demonstrate that analog processing can be used to solve the problem of stereo correspondence. Novel modifications to the algorithms are proposed which improves the computational speed and makes them efficiently implementable in analog hardware. The analog domain implementation provides further speedup in computation and has lower power consumption than a digital implementation.
In the second part of the dissertation, a prototype of an analog processor was developed using commercially available off-the-shelf components. The focus was on providing experimental results that demonstrate functionality and to show that the performance of the prototype for low-level and mid-level image processing tasks is equivalent to a digital implementation. To demonstrate improvement in speed and power consumption, an integrated circuit design of the analog processor was proposed, and it was shown that such an analog processor would be faster than state-of-the-art digital and other analog processors.
In the third part of the dissertation, a memristor-CMOS analog co-processor that can perform floating point vector matrix multiplication (VMM) is proposed. VMM computation underlies some of the major applications. To demonstrate the working of the analog co-processor at a system level, a new tool called PSpice Systems Option is used. It is shown that the analog co-processor has a superior performance when compared to the projected performances of digital and analog processors. Using the new tool, various application simulations for image processing and solution to partial differential equations are performed on the co-processor model
Development and Evaluation of a Real-Time Framework for a Portable Assistive Hearing Device
Testing and verification of digital hearing aid devices, and the embedded software and algorithms can prove to be a challenging task especially taking into account time-to-market considerations. This thesis describes a PC based, real-time, highly configurable framework for the evaluation of audio algorithms. Implementation of audio processing algorithms on such a platform can provide hearing aid designers and manufacturers the ability to test new and existing processing techniques and collect data about their performance in real-life situations, and without the need to develop a prototype device. The platform is based on the Eurotech Catalyst development kit and the Fedora Linux OS, and it utilizes the JACK audio engine to facilitate reliable real-time performance Additionally, we demonstrate the capabilities of this platform by implementing an audio processing chain targeted at improving speech intelligibility for people suffering from auditory neuropathy. Evaluation is performed for both noisy and noise-free environments. Subjective evaluation of the results, using normal hearing listeners and an auditory neuropathy simulator, demonstrates improvement in some conditions
Analog VLSI implementation for stereo correspondence between 2-D images
Many robotics and navigation systems utilizing stereopsis to determine depth have rigid size and power constraints and require direct physical implementation of the stereo algorithm. The main challenges lie in managing the communication between image sensor and image processor arrays, and in parallelizing the computation to determine stereo correspondence between image pixels in real-time. This paper describes the first comprehensive system level demonstration of a dedicated low-power analog VLSI (very large scale integration) architecture for stereo correspondence suitable for real-time implementation. The inputs to the implemented chip are the ordered pixels from a stereo image pair, and the output is a two-dimensional disparity map. The approach combines biologically inspired silicon modeling with the necessary interfacing options for a complete practical solution that can be built with currently available technology in a compact package. Furthermore, the strategy employed considers multiple factors that may degrade performance, including the spatial correlations in images and the inherent accuracy limitations of analog hardware, and augments the design with countermeasures
GaN vs. Si for Class D Audio Applications
The demands and applications of modern power electronics are quickly moving past the maximum performance capabilities of Silicon devices. As the processing of Wide Bandgap (WBG) materials matures and the commercial availability of WBG devices grows, circuit designers are exploring many applications to exploit the performance benefits over traditional Silicon devices. This work examines the under-explored application of GaN-based Class D audio by providing a side-by-side comparison of enhancement-mode GaN devices with currently available Silicon MOSFETs. It is suggested that GaN in Class D audio will allow for lower heat radiation, smaller circuit footprints, and longer battery life as compared to Si MOSFETs with a negligible trade-off for quality of sound
VLSI analogs of neuronal visual processing: a synthesis of form and function
This thesis describes the development and testing of a simple visual system fabricated using complementary metal-oxide-semiconductor (CMOS) very large scale integration (VLSI) technology. This visual system is composed of three subsystems. A silicon retina, fabricated on a single chip, transduces light and performs signal processing in a manner similar to a simple vertebrate retina. A stereocorrespondence chip uses bilateral retinal input to estimate the location of objects in depth. A silicon optic nerve allows communication between chips by a method that preserves the idiom of action potential transmission in the nervous system. Each of these subsystems illuminates various aspects of the relationship
between VLSI analogs and their neurobiological counterparts. The overall synthetic visual system demonstrates that analog VLSI can capture a significant portion of the function of neural structures at a systems level, and concomitantly, that incorporating neural architectures leads to new engineering approaches to computation in VLSI. The relationship between neural systems and VLSI is rooted in the shared limitations imposed by computing in similar physical media. The systems discussed in this text support the belief that the physical limitations imposed by the computational medium significantly affect the evolving algorithm. Since circuits are essentially physical structures, I advocate the use of analog VLSI as powerful medium of abstraction, suitable for understanding and expressing the function of real neural systems. The working chip elevates the circuit description to a kind of synthetic formalism. The behaving physical circuit provides a formal test of theories of function that can be expressed in the language of circuits
- âŠ