315 research outputs found

    Medium access control protocol design for wireless communications and networks review

    Get PDF
    Medium access control (MAC) protocol design plays a crucial role to increase the performance of wireless communications and networks. The channel access mechanism is provided by MAC layer to share the medium by multiple stations. Different types of wireless networks have different design requirements such as throughput, delay, power consumption, fairness, reliability, and network density, therefore, MAC protocol for these networks must satisfy their requirements. In this work, we proposed two multiplexing methods for modern wireless networks: Massive multiple-input-multiple-output (MIMO) and power domain non-orthogonal multiple access (PD-NOMA). The first research method namely Massive MIMO uses a massive number of antenna elements to improve both spectral efficiency and energy efficiency. On the other hand, the second research method (PD-NOMA) allows multiple non-orthogonal signals to share the same orthogonal resources by allocating different power level for each station. PD-NOMA has a better spectral efficiency over the orthogonal multiple access methods. A review of previous works regarding the MAC design for different wireless networks is classified based on different categories. The main contribution of this research work is to show the importance of the MAC design with added optimal functionalities to improve the spectral and energy efficiencies of the wireless networks

    A quality of service architecture for WLAN-wired networks to enhance multimedia support

    Get PDF
    Includes abstract.Includes bibliographical references (leaves 77-84).The use of WLAN for the provision of IP multimedia services faces a number of challenges which include quality of service (QoS). Because WLAN users access multimedia services usually over a wired backbone, attention must be paid to QoS over the integrated WLAN-wired network. This research focuses on the provision of QoS to WLAN users accessing multimedia services over a wired backbone. In this thesis, the IEEE 802.11-2007 enhanced data channel access (EDCA) mechanism is used to provide prioritized QoS on the WLAN media access control (MAC) layer, while weighted round robin (WRR) queue scheduling is used to provide prioritized QoS at the IP layer. The inter-working of the EDCA scheme in the WLAN and the WRR scheduling scheme in the wired network provides end-to-end QoS on a WLAN-wired IP network. A mapping module is introduced to enable the inter-working of the EDCA and WRR mechanisms

    Centralized random backoff for collision free wireless local area networks

    Get PDF
    Over the past few decades, wireless local area networks (WLANs) have been widely deployed for data communication in indoor environments such as offices, houses, and airports. In order to fairly and efficiently use the unlicensed frequency band that Wi-Fi devices share, the devices follow a set of channel access rules, which is called a wireless medium access control (MAC) protocol. It is known that wireless devices following the 802.11 standard MAC protocol, i.e. the distributed coordination function (DCF), suffer from packet collisions when multiple nodes simultaneously transmit. This significantly degrades the throughput performance. Recently, several studies have reported access techniques to reduce the number of packet collisions and to achieve a collision free WLAN. Although these studies have shown that the number of collisions can be reduced to zero in a simple way, there have been a couple of remaining issues to solve, such as dynamic parameter adjustment and fairness to legacy DCF nodes in terms of channel access opportunity. Recently, In-Band Full Duplex (IBFD) communication has received much attention, because it has significant potential to improve the communication capacity of a radio band. IBFD means that a node can simultaneously transmit one signal and receive another signal in the same band at the same time. In order to maximize the performance of IBFD communication capability and to fairly share access to the wireless medium among distributed devices in WLANs, a number of IBFD MAC protocols have been proposed. However, little attention has been paid to fairness issues between half duplex nodes (i.e. nodes that can either transmit or receive but not both simultaneously in one time-frequency resource block) and IBFD capable nodes in the presence of the hidden node problem

    Goodbye, ALOHA!

    Get PDF
    ©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft

    Medium access control for full-duplex in wireless local area networks

    Get PDF
    Current wireless technologies strive to respond to the arising demand for the increase in mobile traffic. Recently, with the introduction of self-interference (SI) cancellation techniques, wireless full-duplex communication has become an attractive solution that doubles the spectral e ciency and enhances data rates. In this thesis, we present a medium access control (MAC) protocol, named Synchronized Contention Window Full-Duplex (S-CW FD) protocol for enabling full duplex communication in wireless local area networks (WLANs). The proposed S-CW FD protocol can not only work in ad hoc and infrastructure modes of IEEE 802.11 WLANs, but with the legacy nodes as well. In this work, saturated throughput of S-CW FD is derived based on a two dimensional Markov chain model, similar to Bianchi's, and those results are used to validate simulations in OPNET tool. Via detailed simulation experiments, the performance of S-CW FD is evaluated under different self-interference models and wireless network conditions. It is shown that when there are no hidden nodes in the network, the S-CW FD protocol can double the throughput of half-duplex IEEE 802.11, and in the presence of hidden nodes in the network, the throughput gain of full duplex over half-duplex can get as high as ten fold, even for moderate SI cancellation levels and heavy load. Comparisons with existing similar FD MAC protocols also indicate that the proposed S-CW FD protocol performs best under realistic network conditions and residual SI. Hence, S-CW FD stands out as a promising FD MAC protocol with a high chance of application in WLANs, not only for signiffcant performance improvements, but also for its exibility and backwards compatibility

    Link layer protocol performance of indoor infrared wireless communications

    Get PDF
    The increasing deployment of portable computers and mobile devices leads to an increasing demand for wireless connections. Infrared presentsseveral advantagesover radio for indoor wireless connectivity but infrared link quality is affected by ambient infrared noise and by low power transmission levels due to eye safety limitations. The Infrared Data Association (IrDA) has developed the widely used IrDA 1.x protocol standard for short range, narrow beam, point to point connections.IrDA addressedthe requirement for indoor multipoint connectivity with the development of the Advanced Infrared (AIr) protocol stack. This work analyses infrared link layer design based on IrDA proposals for addressing link layer topics and suggests implementation issues and protocol modifications that improve the operation of short range infrared connections. The performance of optical wireless links is measuredby the utilization, which can be drawn at the data link layer. A new mathematical model is developed that reaches a simple equation that calculates IrDA 1.x utilization. The model is validated by comparing its outcome with simulation results obtained using the OPNET modeler. The mathematical model is employed to study the effectiveness on utilization of physical and link layer parameters.The simple equation gives insights for the optimum control of the infrared link for maximum utilization. By differentiating the utilization equation, simple formulas are derived for optimum values of the window and frame size parameters. Analytical results indicate that significant utilization increase is observed if the optimum values are implemented, especially for high error rate links. A protocolimprovement that utilizes special Supervisory frames (S-frames) to pass transmission control is proposed to deal with delays introduced by F-timer expiration. Results indicate that employing the special S-frame highly improves utilization when optimum window and frame size values are implemented. The achieved practical utilization increase for optimum parameter implementation is confirmed by meansof simulation. AIr protocol trades speedfor range by employing Repetition Rate (RR) coding to achieve the increased transmission range required for wireless LAN connectivity. AIr employs the RTS/CTS medium reservation scheme to cope with hidden stations and CSMA/CA techniques with linear contention window (CW) adjustment for medium access. A mathematical model is developed for the AIr collision avoidance (CA) procedures and validated by comparing analysis with simulation results. The model is employed to examine the effectiveness of the CA parameters on utilization. By differentiating the utilization equation, the optimum CW size that maximises utilization as a function of the number of the transmitting stations is derived. The proposed linear CW adjustment is very effective in implementing CW values close to optimum and thus minimizing CA delays. AIr implements a Go-Back-N retransmission scheme at high or low level to cope with transmission errors. AIr optionally implements a Stop-and-Wait retransmission scheme to efficiently implement RR coding. Analytical models for the AIr retransmission schemes are developed and employed to compare protocol utilization for different link parametervalues. Finally, the effectiveness of the proposedRR coding on utilization for different retransmission schemes is explored
    • 

    corecore