Optimal Allocation of a STATCOM in a 45 Bus Section of the Brazilian Power System Using Particle Swarm Optimization

This paper introduces the application of Particle Swarm Optimization (PSO) to solve the optimal allocation of a STATCOM in a 45 bus system which is part of the Brazilian power network. The criterion used in finding the optimal location is based on the voltage profile of the system, i.e. the voltage deviation at each bus, with respect to its optimum value, is minimized. In order to test the performance of the PSO algorithm in this particular application, different approaches for inertia weight are investigated; also different values of acceleration constants, number of iterations and maximum velocity are considered. A sensitivity analysis with respect to these parameters is carried out to determine the importance of these settings. Results show that the application of PSO is suitable for this type of problem. The STATCOM location is found with less computational effort compared with a exhaustive search and with a low degree of uncertainty

A Proportional-Integrator Type Adaptive Critic Design-Based Neurocontroller for a Static Compensator in a Multimachine Power System

A novel nonlinear optimal controller for a static compensator (STATCOM) connected to a power system, using artificial neural networks, is presented in this paper. The action dependent heuristic dynamic programming, a member of the adaptive critic designs family is used for the design of the STATCOM neurocontroller. This neurocontroller provides optimal control based on reinforcement learning and approximate dynamic programming. Using a proportional-integrator approach, the proposed neurocontroller is capable of dealing with actual rather than deviation signals. Simulation results are provided to show that the proposed controller outperforms a conventional PI controller for a STATCOM in a small and large multimachine power system during large-scale faults, as well as small disturbances

Adaptive Critic Design Based Neuro-Fuzzy Controller for a Static Compensator in a Multimachine Power System

This paper presents a novel nonlinear optimal controller for a static compensator (STATCOM) connected to a power system, using artificial neural networks and fuzzy logic. The action dependent heuristic dynamic programming, a member of the adaptive Critic designs family, is used for the design of the STATCOM neuro-fuzzy controller. This neuro-fuzzy controller provides optimal control based on reinforcement learning and approximate dynamic programming. Using a proportional-integrator approach the proposed controller is capable of dealing with actual rather than deviation signals. The STATCOM is connected to a multimachine power system. Two multimachine systems are considered in this study: a 10-bus system and a 45-bus network (a section of the Brazilian power system). Simulation results are provided to show that the proposed controller outperforms a conventional PI controller in large scale faults as well as small disturbance

Impact of distributed generation on protection and voltage regulation of distribution systems : a review

During recent decades with the power system restructuring process, centralized energy sources are being replaced with decentralized ones. This phenomenon has resulted in a novel concept in electric power systems, particularly in distribution systems, known as Distributed Generation (DG). On one hand, utilizing DG is important for secure power generation and reducing power losses. On the other hand, widespread use of such technologies introduces new challenges to power systems such as their optimal location, protection devices' settings, voltage regulation, and Power Quality (PQ) issues. Another key point which needs to be considered relates to specific DG technologies based on Renewable Energy Sources (RESs), such as wind and solar, due to their uncertain power generation. In this regard, this paper provides a comprehensive review of different types of DG and investigates the newly emerging challenges arising in the presence of DG in electrical grids.fi=vertaisarvioitu|en=peerReviewed

Optimisation, Optimal Control and Nonlinear Dynamics in Electrical Power, Energy Storage and Renewable Energy Systems

The electrical power system is undergoing a revolution enabled by advances in telecommunications, computer hardware and software, measurement, metering systems, IoT, and power electronics. Furthermore, the increasing integration of intermittent renewable energy sources, energy storage devices, and electric vehicles and the drive for energy efficiency have pushed power systems to modernise and adopt new technologies. The resulting smart grid is characterised, in part, by a bi-directional flow of energy and information. The evolution of the power grid, as well as its interconnection with energy storage systems and renewable energy sources, has created new opportunities for optimising not only their techno-economic aspects at the planning stages but also their control and operation. However, new challenges emerge in the optimization of these systems due to their complexity and nonlinear dynamic behaviour as well as the uncertainties involved.This volume is a selection of 20 papers carefully made by the editors from the MDPI topic “Optimisation, Optimal Control and Nonlinear Dynamics in Electrical Power, Energy Storage and Renewable Energy Systems”, which was closed in April 2022. The selected papers address the above challenges and exemplify the significant benefits that optimisation and nonlinear control techniques can bring to modern power and energy systems

Evolution of microgrids with converter-interfaced generations: Challenges and opportunities

© 2019 Elsevier Ltd Although microgrids facilitate the increased penetration of distributed generations (DGs) and improve the security of power supplies, they have some issues that need to be better understood and addressed before realising the full potential of microgrids. This paper presents a comprehensive list of challenges and opportunities supported by a literature review on the evolution of converter-based microgrids. The discussion in this paper presented with a view to establishing microgrids as distinct from the existing distribution systems. This is accomplished by, firstly, describing the challenges and benefits of using DG units in a distribution network and then those of microgrid ones. Also, the definitions, classifications and characteristics of microgrids are summarised to provide a sound basis for novice researchers to undertake ongoing research on microgrids

Energy Harvesting and Energy Storage Systems

This book discuss the recent developments in energy harvesting and energy storage systems. Sustainable development systems are based on three pillars: economic development, environmental stewardship, and social equity. One of the guiding principles for finding the balance between these pillars is to limit the use of non-renewable energy sources

SVC device optimal location for voltage stability enhancement based on a combined particle swarm optimization-continuation power flow technique

The increased power system loading combined with the worldwide power industry deregulation requires more reliable and efficient control of the power flow and network stability. Flexible AC transmission systems (FACTS) devices give new opportunities for controlling power and enhancing the usable capacity of the existing transmission lines. This paper presents a combined application of the particle swarm optimization (PSO) and the continuation power flow (CPF) technique to determine the optimal placement of static var compensator (SVC) in order to achieve the static voltage stability margin. The PSO objective function to be maximized is the loading factor to modify the load powers. In this scope, two SVC constraints are considered: the reference voltage in the first case and the total reactance and SVC reactive power in the second case. To test the performance of the proposed method, several simulations were performed on IEEE 30-Bus test systems. The results obtained show the effectiveness of the proposed method to find the optimal placement of the static var compensator and the improvement of the voltage stability