Improving the robustness of CELP-like speech decoders using late-arrival packets information : application to G.729 standard in VoIP

L'utilisation de la voix sur Internet est une nouvelle tendance dans Ie secteur des télécommunications et de la réseautique. La paquetisation des données et de la voix est réalisée en utilisant Ie protocole Internet (IP). Plusieurs codecs existent pour convertir la voix codée en paquets. La voix codée est paquetisée et transmise sur Internet. À la réception, certains paquets sont soit perdus, endommages ou arrivent en retard. Ceci est cause par des contraintes telles que Ie délai («jitter»), la congestion et les erreurs de réseau. Ces contraintes dégradent la qualité de la voix. Puisque la transmission de la voix est en temps réel, Ie récepteur ne peut pas demander la retransmission de paquets perdus ou endommages car ceci va causer plus de délai. Au lieu de cela, des méthodes de récupération des paquets perdus (« concealment ») s'appliquent soit à l'émetteur soit au récepteur pour remplacer les paquets perdus ou endommages. Ce projet vise à implémenter une méthode innovatrice pour améliorer Ie temps de convergence suite a la perte de paquets au récepteur d'une application de Voix sur IP. La méthode a déjà été intégrée dans un codeur large-bande (AMR-WB) et a significativement amélioré la qualité de la voix en présence de <<jitter » dans Ie temps d'arrivée des trames au décodeur. Dans ce projet, la même méthode sera intégrée dans un codeur a bande étroite (ITU-T G.729) qui est largement utilise dans les applications de voix sur IP. Le codeur ITU-T G.729 défini des standards pour coder et décoder la voix a 8 kb/s en utilisant 1'algorithme CS-CELP (Conjugate Stmcture Algebraic Code-Excited Linear Prediction).Abstract: Voice over Internet applications is the new trend in telecommunications and networking industry today. Packetizing data/voice is done using the Internet protocol (IP). Various codecs exist to convert the raw voice data into packets. The coded and packetized speech is transmitted over the Internet. At the receiving end some packets are either lost, damaged or arrive late. This is due to constraints such as network delay (fitter), network congestion and network errors. These constraints degrade the quality of speech. Since voice transmission is in real-time, the receiver can not request the retransmission of lost or damaged packets as this will cause more delay. Instead, concealment methods are applied either at the transmitter side (coder-based) or at the receiver side (decoder-based) to replace these lost or late-arrival packets. This work attempts to implement a novel method for improving the recovery time of concealed speech The method has already been integrated in a wideband speech coder (AMR-WB) and significantly improved the quality of speech in the presence of jitter in the arrival time of speech frames at the decoder. In this work, the same method will be integrated in a narrowband speech coder (ITU-T G.729) that is widely used in VoIP applications. The ITUT G.729 coder defines the standards for coding and decoding speech at 8 kb/s using Conjugate Structure Algebraic Code-Excited Linear Prediction (CS-CELP) Algorithm

Frequency Domain Methods for Coding the Linear Predictive Residual of Speech Signals

The most frequently used speech coding paradigm is ACELP, famous because it encodes speech with high quality, while consuming a small bandwidth. ACELP performs linear prediction filtering in order to eliminate the effect of the spectral envelope from the signal. The noise-like excitation is then encoded using algebraic codebooks. The search of this codebook, however, can not be performed optimally with conventional encoders due to the correlation between their samples. Because of this, more complex algorithms are required in order to maintain the quality. Four different transformation algorithms have been implemented (DCT, DFT, Eigenvalue decomposition and Vandermonde decomposition) in order to decorrelate the samples of the innovative excitation in ACELP. These transformations have been integrated in the ACELP of the EVS codec. The transformed innovative excitation is coded using the envelope based arithmetic coder. Objective and subjective tests have been carried out to evaluate the quality of the encoding, the degree of decorrelation achieved by the transformations and the computational complexity of the algorithms

Comparison of Wideband Earpiece Integrations in Mobile Phone

Perinteisesti puhelinverkoissa välitettävä puhe on ollut kapeakaistaista, kaistan ollessa 300 - 3400 Hz. Voidaan kuitenkin olettaa, että laajakaistaiset puhepalvelut tulevat saamaan markkinoilla enemmän jalansijaa tulevina vuosina. Tässä lopputyössä esitellään puheenkoodauksen perusteet laajakaistaisen adaptiivisen moninopeuspuhekoodekin (AMR-WB) kanssa. Laajakaistainen puhekoodekki laajentaa puhekaistan 50-7000 Hz käyttäen 16 kHz näytetaajuutta. Käytännössä laajempi kaista tarkoittaa parannuksia puheen ymmärrettävyyteen ja tekee siitä luonnollisemman ja mukavamman kuuloista. Tämän lopputyön päätavoite on vertailla kahden eri laajakaistaisen matkapuhelinkuulokkeen integrointia. Kysymys kuuluu, kuinka paljon käyttäjä hyötyy isommasta kuulokkeesta matkapuhelimessa? Kuulokkeiden suorituskyvyn selvittämiseksi niille tehtiin objektiivisia mittauksia vapaakentässä. Mittauksia tehtiin myös puhelimelle pää- ja torsosimulaattorissa (HATS) johdottamalla kuuloke suoraan vahvistimelle, sekä lisäksi puhelun ollessa aktiivisena GSM ja WCDMA verkoissa. Objektiiviset mittaukset osoittivat kahden eri integroinnin väliset erot kuulokkeiden taajuusvasteessa ja särössä erityisesti matalilla taajuuksilla. Lopuksi tehtiin kuuntelukoe tarkoituksena selvittää erottaako loppukäyttäjä pienemmän ja isomman kuulokkeen välistä eroa käyttäen kapeakaistaisia ja laajakaistaisia puhelinääninäytteitä. Kuuntelukokeen tuloksien pohjalta voidaan sanoa, että käyttäjä erottaa kahden eri integroinnin erot ja miespuhuja hyötyy naispuhujaa enemmän isommasta kuulokkeesta laajakaistaisella puhekoodekilla.The speech in telecommunication networks has been traditionally narrowband ranging from 300 Hz to 3400 Hz. It can be expected that wideband speech call services will increase their foothold in the markets during the coming years. In this thesis speech coding basics with adaptive multirate wideband (AMR-WB) are introduced. The wideband codec widens the speech band to new range from 50 Hz to 7000 Hz using 16 kHz sampling frequency. In practice the wider band means improvements to speech intelligibility and makes it more natural and comfortable to listen to. The main focus of this thesis work is to compare two different wideband earpiece integrations. The question is how much the end-user will benefit from using a larger earpiece in a mobile phone? To find out speaker performance, objective measurements in free field were done for the earpiece modules. Measurements were performed also for the phone on head and torso simulator (HATS) by wiring the earpieces directly to a power amplifier and with over the air on GSM and WCDMA networks. The results of objective measurements showed differences between the earpiece integrations especially on low frequencies in frequency response and distortion. Finally the subjective listening test is done for comparison to see if the end-user notices the difference between smaller and larger earpiece integrations using narrowband and wideband speech samples. Based on these subjective test results it can be said that the user can differentiate between two different integrations and that a male speaker benefits more from a larger earpiece than a female speaker

Spectral Envelope Modelling for Full-Band Speech Coding

Speech coding considering historically narrow-band was in the latest years significantly improved by widening the coded audio bandwidth. However, existing speech coders still employ a limited band source-filter model extended by parametric coding of the higher band. In this thesis, a full-band source-filter model is considered and especially its spectral magnitude envelope modelling. To match full-band operating mode, we modified, tuned and compared two methods, Linear Predictive Coding (LPC) and Distribution Quantization (DQ). LPC uses autoregressive modeling, while DQ quantifies the energy ratios between parts of the spectrum. Parameters of both methods were quantized with multi-stage vector quantization. Objective and subjective evaluations indicate the two methods used in a full-band source-filter coding scheme perform on the same range and are competitive against conventional speech coders requiring an extra bandwidth extension

Structure-Constrained Basis Pursuit for Compressively Sensing Speech

Compressed Sensing (CS) exploits the sparsity of many signals to enable sampling below the Nyquist rate. If the original signal is sufficiently sparse, the Basis Pursuit (BP) algorithm will perfectly reconstruct the original signal. Unfortunately many signals that intuitively appear sparse do not meet the threshold for sufficient sparsity . These signals require so many CS samples for accurate reconstruction that the advantages of CS disappear. This is because Basis Pursuit/Basis Pursuit Denoising only models sparsity. We developed a Structure-Constrained Basis Pursuit that models the structure of somewhat sparse signals as upper and lower bound constraints on the Basis Pursuit Denoising solution. We applied it to speech, which seems sparse but does not compress well with CS, and gained improved quality over Basis Pursuit Denoising. When a single parameter (i.e. the phone) is encoded, Normalized Mean Squared Error (NMSE) decreases by between 16.2% and 1.00% when sampling with CS between 1/10 and 1/2 the Nyquist rate, respectively. When bounds are coded as a sum of Gaussians, NMSE decreases between 28.5% and 21.6% in the same range. SCBP can be applied to any somewhat sparse signal with a predictable structure to enable improved reconstruction quality with the same number of samples

Scalable Speech Coding for IP Networks

The emergence of Voice over Internet Protocol (VoIP) has posed new challenges to the development of speech codecs. The key issue of transporting real-time voice packet over IP networks is the lack of guarantee for reasonable speech quality due to packet delay or loss. Most of the widely used narrowband codecs depend on the Code Excited Linear Prediction (CELP) coding technique. The CELP technique utilizes the long-term prediction across the frame boundaries and therefore causes error propagation in the case of packet loss and need to transmit redundant information in order to mitigate the problem. The internet Low Bit-rate Codec (iLBC) employs the frame-independent coding and therefore inherently possesses high robustness to packet loss. However, the original iLBC lacks in some of the key features of speech codecs for IP networks: Rate flexibility, Scalability, and Wideband support. This dissertation presents novel scalable narrowband and wideband speech codecs for IP networks using the frame independent coding scheme based on the iLBC. The rate flexibility is added to the iLBC by employing the discrete cosine transform (DCT) and iii the scalable algebraic vector quantization (AVQ) and by allocating different number of bits to the AVQ. The bit-rate scalability is obtained by adding the enhancement layer to the core layer of the multi-rate iLBC. The enhancement layer encodes the weighted iLBC coding error in the modified DCT (MDCT) domain. The proposed wideband codec employs the bandwidth extension technique to extend the capabilities of existing narrowband codecs to provide wideband coding functionality. The wavelet transform is also used to further enhance the performance of the proposed codec. The performance evaluation results show that the proposed codec provides high robustness to packet loss and achieves equivalent or higher speech quality than state-of-the-art codecs under the clean channel condition

Speech coding

Speech is the predominant means of communication between human beings and since the invention of the telephone by Alexander Graham Bell in 1876, speech services have remained to be the core service in almost all telecommunication systems. Original analog methods of telephony had the disadvantage of speech signal getting corrupted by noise, cross-talk and distortion Long haul transmissions which use repeaters to compensate for the loss in signal strength on transmission links also increase the associated noise and distortion. On the other hand digital transmission is relatively immune to noise, cross-talk and distortion primarily because of the capability to faithfully regenerate digital signal at each repeater purely based on a binary decision. Hence end-to-end performance of the digital link essentially becomes independent of the length and operating frequency bands of the link Hence from a transmission point of view digital transmission has been the preferred approach due to its higher immunity to noise. The need to carry digital speech became extremely important from a service provision point of view as well. Modem requirements have introduced the need for robust, flexible and secure services that can carry a multitude of signal types (such as voice, data and video) without a fundamental change in infrastructure. Such a requirement could not have been easily met without the advent of digital transmission systems, thereby requiring speech to be coded digitally. The term Speech Coding is often referred to techniques that represent or code speech signals either directly as a waveform or as a set of parameters by analyzing the speech signal. In either case, the codes are transmitted to the distant end where speech is reconstructed or synthesized using the received set of codes. A more generic term that is applicable to these techniques that is often interchangeably used with speech coding is the term voice coding. This term is more generic in the sense that the coding techniques are equally applicable to any voice signal whether or not it carries any intelligible information, as the term speech implies. Other terms that are commonly used are speech compression and voice compression since the fundamental idea behind speech coding is to reduce (compress) the transmission rate (or equivalently the bandwidth) And/or reduce storage requirements In this document the terms speech and voice shall be used interchangeably