A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version

Securing state reconstruction under sensor and actuator attacks: Theory and design

This paper discusses the problem of reconstructing the state of a linear time invariant system when some of its actuators and sensors are compromised by an adversarial agent. In the model considered in this paper, the adversarial agent attacks an input (output) by manipulating its value arbitrarily, i.e., we impose no constraints (statistical or otherwise) on how control commands (sensor measurements) are changed by the adversary other than a bound on the number of attacked actuators and sensors In the first part of this paper, we introduce the notion of sparse strong observability and we show that is a necessary and sufficient condition for correctly reconstructing the state despite the considered attacks. In the second half of this work, we propose an observer to harness the complexity of this intrinsically combinatorial problem, by leveraging satisfiability modulo theory solving. Numerical simulations illustrate the effectiveness and scalability of our observer

Parity space-based fault detection for Markovian jump systems

This article deals with problems of parity space-based fault detection for a class of discrete-time linear Markovian jump systems. A new algorithm is firstly introduced to reduce the computation of mode-dependent redundancy relation parameter matrices. Different from the case of linear time invariant systems, the parity space-based residual generator for a Markovian jump system cannot be designed off-line because it depends on the history of system modes in the last finite steps. In order to overcome this difficulty, a finite set of parity matrices is pre-designed applying a unified approach to linear time invariant systems. Then the on-line residual generation can be easily implemented. Moreover, the problem of residual evaluation is also considered which includes the determination of a residual evaluation function and a threshold. Finally, a numerical example is given to illustrate the effectiveness of the proposed method

On Reachable Sets of Hidden CPS Sensor Attacks

For given system dynamics, observer structure, and observer-based fault/attack detection procedure, we provide mathematical tools -- in terms of Linear Matrix Inequalities (LMIs) -- for computing outer ellipsoidal bounds on the set of estimation errors that attacks can induce while maintaining the alarm rate of the detector equal to its attack-free false alarm rate. We refer to these sets to as hidden reachable sets. The obtained ellipsoidal bounds on hidden reachable sets quantify the attacker's potential impact when it is constrained to stay hidden from the detector. We provide tools for minimizing the volume of these ellipsoidal bounds (minimizing thus the reachable sets) by redesigning the observer gains. Simulation results are presented to illustrate the performance of our tools

Detection of replay attacks in cyber-physical systems using a frequency-based signature

This paper proposes a frequency-based approach for the detection of replay attacks affecting cyber-physical systems (CPS). In particular, the method employs a sinusoidal signal with a time-varying frequency (authentication signal) into the closed-loop system and checks whether the time profile of the frequency components in the output signal are compatible with the authentication signal or not. In order to carry out this target, the couplings between inputs and outputs are eliminated using a dynamic decoupling technique based on vector fitting. In this way, a signature introduced on a specific input channel will affect only the output that is selected to be associated with that input, which is a property that can be exploited to determine which channels are being affected. A bank of band-pass filters is used to generate signals whose energies can be compared to reconstruct an estimation of the time-varying frequency profile. By matching the known frequency profile with its estimation, the detector can provide the information about whether a replay attack is being carried out or not. The design of the signal generator and the detector are thoroughly discussed, and an example based on a quadruple-tank process is used to show the application and effectiveness of the proposed method.Peer ReviewedPostprint (author's final draft

Unknown input observer approaches to robust fault diagnosis

This thesis focuses on the development of the model-based fault detection and isolation /fault detection and diagnosis (FDI/FDD) techniques using the unknown input observer (UIO) methodology. Using the UI de-coupling philosophy to tackle the robustness issue, a set of novel fault estimation (FE)-oriented UIO approaches are developed based on the classical residual generation-oriented UIO approach considering the time derivative characteristics of various faults. The main developments proposed are:- Implement the residual-based UIO design on a high fidelity commercial aircraft benchmark model to detect and isolate the elevator sensor runaway fault. The FDI design performance is validated using a functional engineering simulation (FES) system environment provided through the activity of an EU FP7 project Advanced Fault Diagnosis for Safer Flight Guidance and Control (ADDSAFE).- Propose a linear time-invariant (LTI) model-based robust fast adaptive fault estimator (RFAFE) with UI de-coupling to estimate the aircraft elevator oscillatory faults considered as actuator faults.- Propose a UI-proportional integral observer (UI-PIO) to estimate actuator multiplicative faults based on an LTI model with UI de-coupling and with added H∞ optimisation to reduce the effects of the sensor noise. This is applied to an example on a hydraulic leakage fault (multiplicative fault) in a wind turbine pitch actuator system, assuming that thefirst derivative of the fault is zero. - Develop an UI–proportional multiple integral observer (UI-PMIO) to estimate the system states and faults simultaneously with the UI acting on the system states. The UI-PMIO leads to a relaxed condition of requiring that the first time derivative of the fault is zero instead of requiring that the finite time fault derivative is zero or bounded. - Propose a novel actuator fault and state estimation methodology, the UI–proportional multiple integral and derivative observer (UI-PMIDO), inspired by both of the RFAFE and UI-PMIO designs. This leads to an observer with the comprehensive feature of estimating faults with bounded finite time derivatives and ensuring fast FE tracking response.- Extend the UI-PMIDO theory based on LTI modelling to a linear parameter varying (LPV) model approach for FE design. A nonlinear two-link manipulator example is used to illustrate the power of this method