Evaluating the Differences of Gridding Techniques for Digital Elevation Models Generation and Their Influence on the Modeling of Stony Debris Flows Routing: A Case Study From Rovina di Cancia Basin (North-Eastern Italian Alps)

Debris \ufb02ows are among the most hazardous phenomena in mountain areas. To cope with debris \ufb02ow hazard, it is common to delineate the risk-prone areas through routing models. The most important input to debris \ufb02ow routing models are the topographic data, usually in the form of Digital Elevation Models (DEMs). The quality of DEMs depends on the accuracy, density, and spatial distribution of the sampled points; on the characteristics of the surface; and on the applied gridding methodology. Therefore, the choice of the interpolation method affects the realistic representation of the channel and fan morphology, and thus potentially the debris \ufb02ow routing modeling outcomes. In this paper, we initially investigate the performance of common interpolation methods (i.e., linear triangulation, natural neighbor, nearest neighbor, Inverse Distance to a Power, ANUDEM, Radial Basis Functions, and ordinary kriging) in building DEMs with the complex topography of a debris \ufb02ow channel located in the Venetian Dolomites (North-eastern Italian Alps), by using small footprint full- waveform Light Detection And Ranging (LiDAR) data. The investigation is carried out through a combination of statistical analysis of vertical accuracy, algorithm robustness, and spatial clustering of vertical errors, and multi-criteria shape reliability assessment. After that, we examine the in\ufb02uence of the tested interpolation algorithms on the performance of a Geographic Information System (GIS)-based cell model for simulating stony debris \ufb02ows routing. In detail, we investigate both the correlation between the DEMs heights uncertainty resulting from the gridding procedure and that on the corresponding simulated erosion/deposition depths, both the effect of interpolation algorithms on simulated areas, erosion and deposition volumes, solid-liquid discharges, and channel morphology after the event. The comparison among the tested interpolation methods highlights that the ANUDEM and ordinary kriging algorithms are not suitable for building DEMs with complex topography. Conversely, the linear triangulation, the natural neighbor algorithm, and the thin-plate spline plus tension and completely regularized spline functions ensure the best trade-off among accuracy and shape reliability. Anyway, the evaluation of the effects of gridding techniques on debris \ufb02ow routing modeling reveals that the choice of the interpolation algorithm does not signi\ufb01cantly affect the model outcomes

Calibration and Sensitivity Analysis of a Stereo Vision-Based Driver Assistance System

Az http://intechweb.org/ alatti "Books" fül alatt kell rákeresni a "Stereo Vision" címre és az 1. fejezetre

Advancing In Situ Modeling of ICMEs: New Techniques for New Observations

It is generally known that multi-spacecraft observations of interplanetary coronal mass ejections (ICMEs) more clearly reveal their three-dimensional structure than do observations made by a single spacecraft. The launch of the STEREO twin observatories in October 2006 has greatly increased the number of multipoint studies of ICMEs in the literature, but this field is still in its infancy. To date, most studies continue to use on flux rope models that rely on single track observations through a vast, multi-faceted structure, which oversimplifies the problem and often hinders interpretation of the large-scale geometry, especially for cases in which one spacecraft observes a flux rope, while another does not. In order to tackle these complex problems, new modeling techniques are required. We describe these new techniques and analyze two ICMEs observed at the twin STEREO spacecraft on 22-23 May 2007, when the spacecraft were separated by ~8 degrees. We find a combination of non-force-free flux rope multi-spacecraft modeling, together with a new non-flux rope ICME plasma flow deflection model, better constrains the large-scale structure of these ICMEs. We also introduce a new spatial mapping technique that allows us to put multispacecraft observations and the new ICME model results in context with the convecting solar wind. What is distinctly different about this analysis is that it reveals aspects of ICME geometry and dynamics in a far more visually intuitive way than previously accomplished. In the case of the 22-23 May ICMEs, the analysis facilitates a more physical understanding of ICME large-scale structure, the location and geometry of flux rope sub-structures within these ICMEs, and their dynamic interaction with the ambient solar wind

Review of the mathematical foundations of data fusion techniques in surface metrology

The recent proliferation of engineered surfaces, including freeform and structured surfaces, is challenging current metrology techniques. Measurement using multiple sensors has been proposed to achieve enhanced benefits, mainly in terms of spatial frequency bandwidth, which a single sensor cannot provide. When using data from different sensors, a process of data fusion is required and there is much active research in this area. In this paper, current data fusion methods and applications are reviewed, with a focus on the mathematical foundations of the subject. Common research questions in the fusion of surface metrology data are raised and potential fusion algorithms are discussed

Clustering Via Nonparametric Density Estimation: the R Package pdfCluster

The R package pdfCluster performs cluster analysis based on a nonparametric estimate of the density of the observed variables. After summarizing the main aspects of the methodology, we describe the features and the usage of the package, and finally illustrate its working with the aid of two datasets

Principal component and Voronoi skeleton alternatives for curve reconstruction from noisy point sets

Surface reconstruction from noisy point samples must take into consideration the stochastic nature of the sample -- In other words, geometric algorithms reconstructing the surface or curve should not insist in following in a literal way each sampled point -- Instead, they must interpret the sample as a “point cloud” and try to build the surface as passing through the best possible (in the statistical sense) geometric locus that represents the sample -- This work presents two new methods to find a Piecewise Linear approximation from a Nyquist-compliant stochastic sampling of a quasi-planar C1 curve C(u) : R → R3, whose velocity vector never vanishes -- One of the methods articulates in an entirely new way Principal Component Analysis (statistical) and Voronoi-Delaunay (deterministic) approaches -- It uses these two methods to calculate the best possible tape-shaped polygon covering the planarised point set, and then approximates the manifold by the medial axis of such a polygon -- The other method applies Principal Component Analysis to find a direct Piecewise Linear approximation of C(u) -- A complexity comparison of these two methods is presented along with a qualitative comparison with previously developed ones -- It turns out that the method solely based on Principal Component Analysis is simpler and more robust for non self-intersecting curves -- For self-intersecting curves the Voronoi-Delaunay based Medial Axis approach is more robust, at the price of higher computational complexity -- An application is presented in Integration of meshes originated in range images of an art piece -- Such an application reaches the point of complete reconstruction of a unified mes