Generation of dynamic motion for anthropomorphic systems under prioritized equality and inequality constraints

In this paper, we propose a solution to compute full-dynamic motions for a humanoid robot, accounting for various kinds of constraints such as dynamic balance or joint limits. As a first step, we propose a unification of task-based control schemes, in inverse kinematics or inverse dynamics. Based on this unification, we generalize the cascade of quadratic programs that were developed for inverse kinematics only. Then, we apply the solution to generate, in simulation, wholebody motions for a humanoid robot in unilateral contact with the ground, while ensuring the dynamic balance on a non horizontal surface

Planning and Control Strategies for Motion and Interaction of the Humanoid Robot COMAN+

Despite the majority of robotic platforms are still confined in controlled environments such as factories, thanks to the ever-increasing level of autonomy and the progress on human-robot interaction, robots are starting to be employed for different operations, expanding their focus from uniquely industrial to more diversified scenarios. Humanoid research seeks to obtain the versatility and dexterity of robots capable of mimicking human motion in any environment. With the aim of operating side-to-side with humans, they should be able to carry out complex tasks without posing a threat during operations. In this regard, locomotion, physical interaction with the environment and safety are three essential skills to develop for a biped. Concerning the higher behavioural level of a humanoid, this thesis addresses both ad-hoc movements generated for specific physical interaction tasks and cyclic movements for locomotion. While belonging to the same category and sharing some of the theoretical obstacles, these actions require different approaches: a general high-level task is composed of specific movements that depend on the environment and the nature of the task itself, while regular locomotion involves the generation of periodic trajectories of the limbs. Separate planning and control architectures targeting these aspects of biped motion are designed and developed both from a theoretical and a practical standpoint, demonstrating their efficacy on the new humanoid robot COMAN+, built at Istituto Italiano di Tecnologia. The problem of interaction has been tackled by mimicking the intrinsic elasticity of human muscles, integrating active compliant controllers. However, while state-of-the-art robots may be endowed with compliant architectures, not many can withstand potential system failures that could compromise the safety of a human interacting with the robot. This thesis proposes an implementation of such low-level controller that guarantees a fail-safe behaviour, removing the threat that a humanoid robot could pose if a system failure occurred

Representation and control of coordinated-motion tasks for human-robot systems

It is challenging for robots to perform various tasks in a human environment. This is because many human-centered tasks require coordination in both hands and may often involve cooperation with another human. Although human-centered tasks require different types of coordinated movements, most of the existing methodologies have focused only on specific types of coordination. This thesis aims at the description and control of coordinated-motion tasks for human-robot systems; i.e., humanoid robots as well as multi-robot and human-robot systems. First, for bimanually coordinated-motion tasks in dual-manipulator systems, we propose the Extended-Cooperative-Task-Space (ECTS) representation, which extends the existing Cooperative-Task-Space (CTS) representation based on the kinematic models for human bimanual movements in Biomechanics. The proposed ECTS representation can represent the whole spectrum of dual-arm motion/force coordination using two sets of ECTS motion/force variables in a unified manner. The type of coordination can be easily chosen by two meaningful coefficients, and during coordinated-motion tasks, each set of variables directly describes two different aspects of coordinated motion and force behaviors. Thus, the operator can specify coordinated-motion/force tasks more intuitively in high-level descriptions, and the specified tasks can be easily reused in other situations with greater flexibility. Moreover, we present consistent procedures of using the ECTS representation for task specifications in the upper-body and lower-body subsystems of humanoid robots in order to perform manipulation and locomotion tasks, respectively. Besides, we propose and discuss performance indices derived based on the ECTS representation, which can be used to evaluate and optimize the performance of any type of dual-arm manipulation tasks. We show that using the ECTS representation for specifying both dual-arm manipulation and biped locomotion tasks can greatly simplify the motion planning process, allowing the operator to focus on high-level descriptions of those tasks. Both upper-body and lower-body task specifications are demonstrated by specifying whole-body task examples on a Hubo II+ robot carrying out dual-arm manipulation as well as biped locomotion tasks in a simulation environment. We also present the results from experiments on a dual-arm robot (Baxter) for teleoperating various types of coordinated-motion tasks using a single 6D mouse interface. The specified upper- and lower-body tasks can be considered as coordinated motions with constraints. In order to express various constraints imposed across the whole-body, we discuss the modeling of whole-body structure and the computations for robotic systems having multiple kinematic chains. Then we present a whole-body controller formulated as a quadratic programming, which can take different types of constraints into account in a prioritized manner. We validate the whole-body controller based on the simulation results on a Hubo II+ robot performing specified whole-body task examples with a number of motion and force constraints as well as actuation limits. Lastly, we discuss an extension of the ECTS representation, called Hierarchical Extended-Cooperative-Task Space (H-ECTS) framework, which uses tree-structured graphical representations for coordinated-motion tasks of multi-robot and human-robot systems. The H-ECTS framework is validated by experimental results on two Baxter robots cooperating with each other as well as with an additional human partner

Humanoid manipulation and locomotion with real-time footstep optimization

Cette thèse porte sur la réalisation des tâches avec la locomotion sur des robots humanoïdes. Grâce à leurs nombreux degrés de liberté, ces robots possèdent un très haut niveau de redondance. D’autre part, les humanoïdes sont sous-actionnés dans le sens où la position et l’orientation ne sont pas directement contrôlées par un moteur. Ces deux aspects, le plus souvent étudiés séparément dans la littérature, sont envisagés ici dans un même cadre. En outre, la génération d’un mouvement complexe impliquant à la fois des tâches de manipulation et de locomotion, étudiée habituellement sous l’angle de la planification de mouvement, est abordée ici dans sa composante réactivité temps réel. En divisant le processus d’optimisation en deux étapes, un contrôleur basé sur la notion de pile de tâches permet l’adaptation temps réel des empreintes de pas planifiées dans la première étape. Un module de perception est également conçu pour créer une boucle fermée de perception-décision-action. Cette architecture combinant planification et réactivité est validée sur le robot HRP-2. Deux classes d’expériences sont menées. Dans un cas, le robot doit saisir un objet éloigné, posé sur une table ou sur le sol. Dans l’autre, le robot doit franchir un obstacle. Dans les deux cas, les condition d’exécution sont mises à jour en temps réel pour faire face à la dynamique de l’environnement : changement de position de l’objet à saisir ou de l’obstacle à franchir. ABSTRACT : This thesis focuses on realization of tasks with locomotion on humanoid robots. Thanks to their numerous degrees of freedom, humanoid robots possess a very high level of redundancy. On the other hand, humanoids are underactuated in the sense that the position and orientation of the base are not directly controlled by any motor. These two aspects, usually studied separately in manipulation and locomotion research, are unified in a same framework in this thesis and are resolved as one unique problem. Moreover, the generation of a complex movement involving both tasks and footsteps is also improved becomes reactive. By dividing the optimization process into appropriate stages and by feeding directly the intermediate result to a task-based controller, footsteps can be calculated and adapted in real-time to deal with changes in the environment. A perception module is also developed to build a closed perception-decision-action loop. This architecture combining motion planning and reactivity validated on the HRP-2 robot. Two classes of experiments are carried out. In one case the robot has to grasp an object far away at different height level. In the other, the robot has to step over an object on the floor. In both cases, the execution conditions are updated in real-time to deal with the dynamics of the environment: changes in position of the target to be caught or of the obstacle to be stepped over