A new iterative WLS Chebyshev approximation method for the design of two-dimensional FIR digital filters

[[abstract]]In this paper, based on Chi-Chiou's weighted least-squares (WLS) Chebyshev approximation method which is for the design of one-dimensional (1-D) FIR digital filters with arbitrary complex frequency response, we propose a new iterative WLS Chebyshev approximation method for the design of two-dimensional (2-D) FIR digital filters with arbitrary complex frequency response. Several design examples are provided to justify the good performance of the proposed approximation method.[[fileno]]2030157030004[[department]]電機工程學

Digital Filter Design Using Improved Teaching-Learning-Based Optimization

Digital filters are an important part of digital signal processing systems. Digital filters are divided into finite impulse response (FIR) digital filters and infinite impulse response (IIR) digital filters according to the length of their impulse responses. An FIR digital filter is easier to implement than an IIR digital filter because of its linear phase and stability properties. In terms of the stability of an IIR digital filter, the poles generated in the denominator are subject to stability constraints. In addition, a digital filter can be categorized as one-dimensional or multi-dimensional digital filters according to the dimensions of the signal to be processed. However, for the design of IIR digital filters, traditional design methods have the disadvantages of easy to fall into a local optimum and slow convergence. The Teaching-Learning-Based optimization (TLBO) algorithm has been proven beneficial in a wide range of engineering applications. To this end, this dissertation focusses on using TLBO and its improved algorithms to design five types of digital filters, which include linear phase FIR digital filters, multiobjective general FIR digital filters, multiobjective IIR digital filters, two-dimensional (2-D) linear phase FIR digital filters, and 2-D nonlinear phase FIR digital filters. Among them, linear phase FIR digital filters, 2-D linear phase FIR digital filters, and 2-D nonlinear phase FIR digital filters use single-objective type of TLBO algorithms to optimize; multiobjective general FIR digital filters use multiobjective non-dominated TLBO (MOTLBO) algorithm to optimize; and multiobjective IIR digital filters use MOTLBO with Euclidean distance to optimize. The design results of the five types of filter designs are compared to those obtained by other state-of-the-art design methods. In this dissertation, two major improvements are proposed to enhance the performance of the standard TLBO algorithm. The first improvement is to apply a gradient-based learning to replace the TLBO learner phase to reduce approximation error(s) and CPU time without sacrificing design accuracy for linear phase FIR digital filter design. The second improvement is to incorporate Manhattan distance to simplify the procedure of the multiobjective non-dominated TLBO (MOTLBO) algorithm for general FIR digital filter design. The design results obtained by the two improvements have demonstrated their efficiency and effectiveness

A WISE method for designing IIR filters

The problem of designing optimal digital IIR filters with frequency responses approximating arbitrarily chosen complex functions is considered. The real-valued coefficients of the filter's transfer function are obtained by numerical minimization of carefully formulated cost, which is referred here to as the weighted integral of the squared error (WISE) criterion. The WISE criterion linearly combines the WLS criterion that is used in the weighted least squares approach toward filter design and some time-domain components. The WLS part of WISE enforces quality of the frequency response of the designed filter, while the time-domain part of the WISE criterion restricts the positions of the filter's poles to the interior of an origin-centred circle with arbitrary radius. This allows one not only to achieve stability of the filter but also to maintain some safety margins. A great advantage of the proposed approach is that it does not impose any constraints on the optimization problem and the optimal filter can be sought using off-the-shelf optimization procedures. The power of the proposed approach is illustrated with filter design examples that compare favorably with results published in research literature

A new method for designing FIR filters with variable characteristics

This letter proposes a new method for designing finite-impulse response (FIR) filters with variable characteristics. The impulse response of the variable digital filter (VDF) is parameterized as a linear combination of functions in the spectral or tuning parameters. Using the least square objective function, the optimal solution is obtained by solving a system of linear equations. Design results show that this method is simple and effective in designing FIR VDF with good frequency characteristics. Furthermore, by using piecewise polynomial, instead of ordinary polynomial, more complicated frequency characteristics, or larger tuning range can be approximated.published_or_final_versio

Digital Filters

The new technology advances provide that a great number of system signals can be easily measured with a low cost. The main problem is that usually only a fraction of the signal is useful for different purposes, for example maintenance, DVD-recorders, computers, electric/electronic circuits, econometric, optimization, etc. Digital filters are the most versatile, practical and effective methods for extracting the information necessary from the signal. They can be dynamic, so they can be automatically or manually adjusted to the external and internal conditions. Presented in this book are the most advanced digital filters including different case studies and the most relevant literature

FRM-Based FIR filters with minimum coefficient sensitivities

A method for optimizing FRM-based FIR filters with optimum coefficient sensitivity is presented. This technique can be used in conjunction with nonlinear optimization techniques to design very sharp filters that do not only have very sparse coefficient values but also very low coefficient sensitivity

Digital Filter Design Using Improved Artificial Bee Colony Algorithms

Digital filters are often used in digital signal processing applications. The design objective of a digital filter is to find the optimal set of filter coefficients, which satisfies the desired specifications of magnitude and group delay responses. Evolutionary algorithms are population-based meta-heuristic algorithms inspired by the biological behaviors of species. Compared to gradient-based optimization algorithms such as steepest descent and Newton’s like methods, these bio-inspired algorithms have the advantages of not getting stuck at local optima and being independent of the starting point in the solution space. The limitations of evolutionary algorithms include the presence of control parameters, problem specific tuning procedure, premature convergence and slower convergence rate. The artificial bee colony (ABC) algorithm is a swarm-based search meta-heuristic algorithm inspired by the foraging behaviors of honey bee colonies, with the benefit of a relatively fewer control parameters. In its original form, the ABC algorithm has certain limitations such as low convergence rate, and insufficient balance between exploration and exploitation in the search equations. In this dissertation, an ABC-AMR algorithm is proposed by incorporating an adaptive modification rate (AMR) into the original ABC algorithm to increase convergence rate by adjusting the balance between exploration and exploitation in the search equations through an adaptive determination of the number of parameters to be updated in every iteration. A constrained ABC-AMR algorithm is also developed for solving constrained optimization problems.There are many real-world problems requiring simultaneous optimizations of more than one conflicting objectives. Multiobjective (MO) optimization produces a set of feasible solutions called the Pareto front instead of a single optimum solution. For multiobjective optimization, if a decision maker’s preferences can be incorporated during the optimization process, the search process can be confined to the region of interest instead of searching the entire region. In this dissertation, two algorithms are developed for such incorporation. The first one is a reference-point-based MOABC algorithm in which a decision maker’s preferences are included in the optimization process as the reference point. The second one is a physical-programming-based MOABC algorithm in which physical programming is used for setting the region of interest of a decision maker. In this dissertation, the four developed algorithms are applied to solve digital filter design problems. The ABC-AMR algorithm is used to design Types 3 and 4 linear phase FIR differentiators, and the results are compared to those obtained by the original ABC algorithm, three improved ABC algorithms, and the Parks-McClellan algorithm. The constrained ABC-AMR algorithm is applied to the design of sparse Type 1 linear phase FIR filters of filter orders 60, 70 and 80, and the results are compared to three state-of-the-art design methods. The reference-point-based multiobjective ABC algorithm is used to design of asymmetric lowpass, highpass, bandpass and bandstop FIR filters, and the results are compared to those obtained by the preference-based multiobjective differential evolution algorithm. The physical-programming-based multiobjective ABC algorithm is used to design IIR lowpass, highpass and bandpass filters, and the results are compared to three state-of-the-art design methods. Based on the obtained design results, the four design algorithms are shown to be competitive as compared to the state-of-the-art design methods

IIR Digital Filter Design Using Convex Optimization

Digital filters play an important role in digital signal processing and communication. From the 1960s, a considerable number of design algorithms have been proposed for finite-duration impulse response (FIR) digital filters and infinite-duration impulse response (IIR) digital filters. Compared with FIR digital filters, IIR digital filters have better approximation capabilities under the same specifications. Nevertheless, due to the presence of the denominator in its rational transfer function, an IIR filter design problem cannot be easily formulated as an equivalent convex optimization problem. Furthermore, for stability, all the poles of an IIR digital filter must be constrained within a stability domain, which, however, is generally nonconvex. Therefore, in practical designs, optimal solutions cannot be definitely attained. In this dissertation, we focus on IIR filter design problems under the weighted least-squares (WLS) and minimax criteria. Convex optimization will be utilized as the major mathematical tool to formulate and analyze such IIR filter design problems. Since the original IIR filter design problem is essentially nonconvex, some approximation and convex relaxation techniques have to be deployed to achieve convex formulations of such design problems. We first consider the stability issue. A sufficient and necessary stability condition is derived from the argument principle. Although the original stability condition is in a nonconvex form, it can be appropriately approximated by a quadratic constraint and readily combined with sequential WLS design procedures. Based on the sufficient and necessary stability condition, this approximate stability constraint can achieve an improved description of the nonconvex stability domain. We also address the nonconvexity issue of minimax design of IIR digital filters. Convex relaxation techniques are applied to obtain relaxed design problems, which are formulated, respectively, as second-order cone programming (SOCP) and semidefinite programming (SDP) problems. By solving these relaxed design problems, we can estimate lower bounds of minimum approximation errors, which are useful in subsequent design procedures to achieve real minimax solutions. Since the relaxed design problems are independent of local information, compared with many prevalent design methods which employ local search, the proposed design methods using the convex relaxation techniques have an increased chance to obtain an optimal design

H^∞-Optimal Fractional Delay Filters

Fractional delay filters are digital filters to delay discrete-time signals by a fraction of the sampling period. Since the delay is fractional, the intersample behavior of the original analog signal becomes crucial. In contrast to the conventional designs based on the Shannon sampling theorem with the band-limiting hypothesis, the present paper proposes a new approach based on the modern sampled-data $H^{infty}$ optimization that aims at restoring the intersample behavior beyond the Nyquist frequency. By using the lifting transform or continuous-time blocking the design problem is equivalently reduced to a discrete-time $H^{infty}$ optimization, which can be effectively solved by numerical computation softwares. Moreover, a closed-form solution is obtained under an assumption on the original analog signals. Design examples are given to illustrate the advantage of the proposed method