Small scale implementation of a robotic urban search and rescue network

Thesis (M.S.) University of Alaska Fairbanks, 2012With the advancement of robotics technologies, it is now possible to use robots for high risk jobs that have historically been accomplished by humans. One such example is the use of robots for Urban Search and Rescue (USR): finding chemical spills, fires, or human survivors in disaster areas. With the ability to include inexpensive wireless transceivers, it is possible to network numerous robots as part of a swarm that can explore an area much more expeditiously than a single robot can. With the inclusion of wireless capabilities comes the necessity to create a protocol for the communication between robots. Also necessary is the creation of an exploration protocol that allows the network of robots to explore such a building or search area in as little time as possible yet as accurately as possible. This thesis covers the development of such a network of robots, starting with the hardware/software co-design, the individual robots' control mechanisms, and their mapping and communications protocols

Position referenced force augmentation in teleoperated hydraulic manipulators operating under delayed and lossy networks: a pilot study.

Position error between motions of the master and slave end-effectors is inevitable as it originates from hard-to-avoid imperfections in controller design and model uncertainty. Moreover, when a slave manipulator is controlled through a delayed and lossy communication channel, the error between the desired motion originating from the master device and the actual movement of the slave manipulator end-effector is further exacerbated. This paper introduces a force feedback scheme to alleviate this problem by simply guiding the operator to slow down the haptic device motion and, in turn, allows the slave manipulator to follow the desired trajectory closely. Using this scheme, the master haptic device generates a force, which is proportional to the position error at the slave end-effector, and opposite to the operator's intended motion at the master site. Indeed, this force is a signal or cue to the operator for reducing the hand speed when position error, due to delayed and lossy network, appears at the slave site. Effectiveness of the proposed scheme is validated by performing experiments on a hydraulic telemanipulator setup developed for performing live-line maintenance. Experiments are conducted when the system operates under both dedicated and wireless networks. Results show that the scheme performs well in reducing the position error between the haptic device and the slave end-effector. Specifically, by utilizing the proposed force, the mean position error, for the case presented here, reduces by at least 92% as compared to the condition without the proposed force augmentation scheme. The scheme is easy to implement, as the only required on-line measurement is the angular displacement of the slave manipulator joints

Connecting Wireless Sensor Networks to the Robot Operating System

AbstractRobot systems largely depend on embedded systems to operate. The interfaces of those embedded systems, e.g. motor controllers or laser scanners, are often vendor-specific and therefore require a component that translates from/to the Robot Operating System (ROS) Middleware interface. In this work we present an implementation and evaluation of a ROS Middleware client based on the Contiki operating systems, which is suitable for constrained embedded devices, like wireless sensor nodes. We show that in-buffer processing of ROS messages without relying on dynamic memory allocation is possible. That message contents can be accessed conveniently via well-known concepts of the C language (structs) with negligible processing overhead compared to a C++-based client. And that the message-passing middle- ware concept of ROS fits nicely in Contiki's event-based nature. Furthermore, in order for an environment enriched with wireless sensor network to help robots in navigating, understanding and manipulating environments a direct integration is mandatory

Observer design for non-linear networked control systems with persistently exciting protocols

International audienceWe study the design of state observers for non-linear networked control systems (NCSs) affected by disturbances and measurement noise, via an emulation-like approach. That is, given an observer designed with a specific stability property in the absence of communication constraints, we implement it over a network and we provide sufficient conditions on the latter to preserve the stability property of the observer. In particular, we provide a bound on the maximum allowable transmission interval (MATI) that guarantees an input-to-state stability (ISS) property for the corresponding estimation error system. The stability analysis is trajectory-based, utilises small-gain arguments, and exploits a persistently exciting (PE) property of the scheduling protocols. This property is key in our analysis and allows us to obtain significantly larger MATI bounds in comparison to the ones found in the literature. Our results hold for a general class of NCSs, however, we show that these results are also applicable to NCSs implemented over a specific physical network called WirelessHART (WH). The latter is mainly characterised by its multi-hop structure, slotted communication cycles, and the possibility to simultaneously transmit over different frequencies. We show that our results can be further improved by taking into account the intrinsic structure of the WH-NCS model. That is, we explicitly exploit the model structure in our analysis to obtain an even tighter MATI bound that guarantees the same ISS property for the estimation error system. Finally, to illustrate our results, we present analysis and numerical simulations for a class of Lipschitz non-linear systems and high-gain observers

Adaptive Controller Placement for Wireless Sensor-Actuator Networks with Erasure Channels

Wireless sensor-actuator networks offer flexibility for control design. One novel element which may arise in networks with multiple nodes is that the role of some nodes does not need to be fixed. In particular, there is no need to pre-allocate which nodes assume controller functions and which ones merely relay data. We present a flexible architecture for networked control using multiple nodes connected in series over analog erasure channels without acknowledgments. The control architecture proposed adapts to changes in network conditions, by allowing the role played by individual nodes to depend upon transmission outcomes. We adopt stochastic models for transmission outcomes and characterize the distribution of controller location and the covariance of system states. Simulation results illustrate that the proposed architecture has the potential to give better performance than limiting control calculations to be carried out at a fixed node.Comment: 10 pages, 8 figures, to be published in Automatic

An Integrated Testbed for Cooperative Perception with Heterogeneous Mobile and Static Sensors

Cooperation among devices with different sensing, computing and communication capabilities provides interesting possibilities in a growing number of problems and applications including domotics (domestic robotics), environmental monitoring or intelligent cities, among others. Despite the increasing interest in academic and industrial communities, experimental tools for evaluation and comparison of cooperative algorithms for such heterogeneous technologies are still very scarce. This paper presents a remote testbed with mobile robots and Wireless Sensor Networks (WSN) equipped with a set of low-cost off-the-shelf sensors, commonly used in cooperative perception research and applications, that present high degree of heterogeneity in their technology, sensed magnitudes, features, output bandwidth, interfaces and power consumption, among others. Its open and modular architecture allows tight integration and interoperability between mobile robots and WSN through a bidirectional protocol that enables full interaction. Moreover, the integration of standard tools and interfaces increases usability, allowing an easy extension to new hardware and software components and the reuse of code. Different levels of decentralization are considered, supporting from totally distributed to centralized approaches. Developed for the EU-funded Cooperating Objects Network of Excellence (CONET) and currently available at the School of Engineering of Seville (Spain), the testbed provides full remote control through the Internet. Numerous experiments have been performed, some of which are described in the paper