Design for Wire + Arc Additive Manufacture: design rules and build orientation selection

Wire + Arc Additive Manufacture (WAAM) is an additive manufacturing technology that can produce near net-shape parts layer by layer in an automated manner using welding technology controlled by a robot or CNC machine. WAAM has been shown to produce parts with good structural integrity in a range of materials including titanium, steel and aluminium and has the potential to produce high value structural parts at lower cost with much less waste material and shorter lead times that conventional manufacturing processes. This paper provides an initial set of design rules for WAAM and presents a methodology for build orientation selection for WAAM parts. The paper begins with a comparison between the design requirements and capabilities of WAAM and other additive manufacturing technologies, design guidelines for WAAM are then presented based on experimental work. A methodology to select the most appropriate build orientation for WAAM parts is then presented using a multi attribute decision matrix approach to compare different design alternatives. Two aerospace case study parts are provided to illustrate the methodology

Machining strategy development in 5-axis milling operations using process models

Increased productivity and part quality can be achieved by selecting machining strategies and conditions properly. At one extreme very high speed and feed rate with small depth of cut can be used for high productivity whereas deep cuts accompanied with slow speeds and feeds may also provide increased material removal rates in some cases. In this study, it is shown that process models are useful tools to simulate and compare alternative strategies for machining of a part. 5-axis milling of turbine engine compressors made out of titanium alloys is used as the case study where strategies such as flank milling (deep cuts), point milling (light cuts) and stripe milling (medium depths) are compared in terms of process time by considering chatter stability, surface finish and tool deflections

Intelligent systems in manufacturing: current developments and future prospects

Global competition and rapidly changing customer requirements are demanding increasing changes in manufacturing environments. Enterprises are required to constantly redesign their products and continuously reconfigure their manufacturing systems. Traditional approaches to manufacturing systems do not fully satisfy this new situation. Many authors have proposed that artificial intelligence will bring the flexibility and efficiency needed by manufacturing systems. This paper is a review of artificial intelligence techniques used in manufacturing systems. The paper first defines the components of a simplified intelligent manufacturing systems (IMS), the different Artificial Intelligence (AI) techniques to be considered and then shows how these AI techniques are used for the components of IMS

Modeling and Optimal Design of Machining-Induced Residual Stresses in Aluminium Alloys Using a Fast Hierarchical Multiobjective Optimization Algorithm

The residual stresses induced during shaping and machining play an important role in determining the integrity and durability of metal components. An important issue of producing safety critical components is to find the machining parameters that create compressive surface stresses or minimise tensile surface stresses. In this paper, a systematic data-driven fuzzy modelling methodology is proposed, which allows constructing transparent fuzzy models considering both accuracy and interpretability attributes of fuzzy systems. The new method employs a hierarchical optimisation structure to improve the modelling efficiency, where two learning mechanisms cooperate together: NSGA-II is used to improve the model’s structure while the gradient descent method is used to optimise the numerical parameters. This hybrid approach is then successfully applied to the problem that concerns the prediction of machining induced residual stresses in aerospace aluminium alloys. Based on the developed reliable prediction models, NSGA-II is further applied to the multi-objective optimal design of aluminium alloys in a ‘reverse-engineering’ fashion. It is revealed that the optimal machining regimes to minimise the residual stress and the machining cost simultaneously can be successfully located

Optimization of 5-Axis milling processes based on the process models with application to airfoil machining

5-axis milling is widely used in machining of complex surfaces such as airfoils. Improper selection of machining parameters may cause low productivity and undesired results during machining. There are several constraints such as available power and torque, chatter stability, tool breakage etc. In order to respect such constraints proper machining parameters should be determined. In this paper, methodologies for improving 5-axis milling processes are presented. Selection of machining parameters is performed using process simulations. The developed methodologies are presented on an example airfoil

Design methodology for smart actuator services for machine tool and machining control and monitoring

This paper presents a methodology to design the services of smart actuators for machine tools. The smart actuators aim at replacing the traditional drives (spindles and feed-drives) and enable to add data processing abilities to implement monitoring and control tasks. Their data processing abilities are also exploited in order to create a new decision level at the machine level. The aim of this decision level is to react to disturbances that the monitoring tasks detect. The cooperation between the computational objects (the smart spindle, the smart feed-drives and the CNC unit) enables to carry out functions for accommodating or adapting to the disturbances. This leads to the extension of the notion of smart actuator with the notion of agent. In order to implement the services of the smart drives, a general design is presented describing the services as well as the behavior of the smart drive according to the object oriented approach. Requirements about the CNC unit are detailed. Eventually, an implementation of the smart drive services that involves a virtual lathe and a virtual turning operation is described. This description is part of the design methodology. Experimental results obtained thanks to the virtual machine are then presented

Latest Developments in Industrial Hybrid Machine Tools that Combine Additive and Subtractive Operations

Hybrid machine tools combining additive and subtractive processes have arisen as a solution to increasing manufacture requirements, boosting the potentials of both technologies, while compensating and minimizing their limitations. Nevertheless, the idea of hybrid machines is relatively new and there is a notable lack of knowledge about the implications arisen from their in-practice use. Therefore, the main goal of the present paper is to fill the existing gap, giving an insight into the current advancements and pending tasks of hybrid machines both from an academic and industrial perspective. To that end, the technical-economical potentials and challenges emerging from their use are identified and critically discussed. In addition, the current situation and future perspectives of hybrid machines from the point of view of process planning, monitoring, and inspection are analyzed. On the one hand, it is found that hybrid machines enable a more efficient use of the resources available, as well as the production of previously unattainable complex parts. On the other hand, it is concluded that there are still some technological challenges derived from the interaction of additive and subtractive processes to be overcome (e.g., process planning, decision planning, use of cutting fluids, and need for a post-processing) before a full implantation of hybrid machines is fulfilledSpecial thanks are addressed to the Industry and Competitiveness Spanish Ministry for the support on the DPI2016-79889-R INTEGRADDI project and to the PARADDISE project H2020-IND-CE-2016-17/H2020-FOF-2016 of the European Union's Horizon 2020 research and innovation program

The relevance of outsourcing and leagile strategies in performance optimization of an integrated process planning and scheduling

Over the past few years growing global competition has forced the manufacturing industries to upgrade their old production strategies with the modern day approaches. As a result, recent interest has been developed towards finding an appropriate policy that could enable them to compete with others, and facilitate them to emerge as a market winner. Keeping in mind the abovementioned facts, in this paper the authors have proposed an integrated process planning and scheduling model inheriting the salient features of outsourcing, and leagile principles to compete in the existing market scenario. The paper also proposes a model based on leagile principles, where the integrated planning management has been practiced. In the present work a scheduling problem has been considered and overall minimization of makespan has been aimed. The paper shows the relevance of both the strategies in performance enhancement of the industries, in terms of their reduced makespan. The authors have also proposed a new hybrid Enhanced Swift Converging Simulated Annealing (ESCSA) algorithm, to solve the complex real-time scheduling problems. The proposed algorithm inherits the prominent features of the Genetic Algorithm (GA), Simulated Annealing (SA), and the Fuzzy Logic Controller (FLC). The ESCSA algorithm reduces the makespan significantly in less computational time and number of iterations. The efficacy of the proposed algorithm has been shown by comparing the results with GA, SA, Tabu, and hybrid Tabu-SA optimization methods

Production planning under dynamic product environment: a multi-objective goal programming approach

Production planning is a complicated task that requires cooperation among multiple functional units in any organization. In order to design an efficient production planning system, a good understanding of the environment in terms of customers, products and manufacturing processes is a must. Although such planning exists in the company, it is often incorrectly structured due to the presence of multiple conflicting objectives. The primary difficulty in modern decision analysis is the treatment of multiple conflicting objectives. A formal decision analysis that is capable of handling multiple conflicting goals through the use of priorities may be a new frontier of management science. The objective of this study is to develop a multi objective goal programming (MOGP) model to a real-life manufacturing situation to show the trade-off between different some times conflicting goals concerning customer, product and manufacturing of production planning environment. For illustration, two independent goal priority structures have been considered. The insights gained from the experimentation with the two goal priority structures will guide and assist the decision maker for achieving the organizational goals for optimum utilization of resources in improving companies competitiveness. The MOGP results of the study are of very useful to various functional areas of the selected case organization for routine planning and scheduling. Some of the specific decision making situations in this context are: (i). the expected quality costs and production costs under identified product scenarios, (ii).under and over utilization of crucial machine at different combinations of production volumes, and (iii). the achievement of sales revenue goal at different production volume combinations. The ease of use and interpretation make the proposed MOGP model a powerful communication tool between top and bottom level managers while converting the strategic level objectives into concrete tactical and operational level plans.