Energy-efficient traffic engineering

The energy consumption in telecommunication networks is expected to grow considerably, especially in core networks. In this chapter, optimization of energy consumption is approached from two directions. In a first study, multilayer traffic engineering (MLTE) is used to assign energy-efficient paths and logical topology to IP traffic. The relation with traditional capacity optimization is explained, and the MLTE strategy is applied for daily traffic variations. A second study considers the core network below the IP layer, giving a detailed power consumption model. Optical bypass is evaluated as a technique to achieve considerable power savings over per-hop opticalelectronicoptical regeneration. Document type: Part of book or chapter of boo

MulCh: a Multi-layer Channel Router using One, Two, and Three Layer Partitions

Chameleon, a channel router for three layers of interconnect, has been implemented to accept specification of an arbitrary number of layers. Chameleon is based on a strategy of decomposing the multilayer problem into two- and three-layer problems in which one of the layers is reserved primarily for vertical wire runs and the other layer(s) for horizontal runs. In some situations, however, it is advantageous to consider also layers that allow the routing of entire nets, using both horizontal and vertical wires. MulCh is a multilayer channel router that extends the algorithms of Chameleon in this direction. MulCh can route channels with any number of layers and automatically chooses a good assignment of wiring strategies to the different layers. In test cases, MulCh shows significant improvement over Chameleon in terms of channel width, net length, and number of vias

Efficient Interconnection Schemes for VLSI and Parallel Computation

This thesis is primarily concerned with two problems of interconnecting components in VLSI technologies. In the first case, the goal is to construct efficient interconnection networks for general-purpose parallel computers. The second problem is a more specialized problem in the design of VLSI chips, namely multilayer channel routing. In addition, a final part of this thesis provides lower bounds on the area required for VLSI implementations of finite-state machines. This thesis shows that networks based on Leiserson\u27s fat-tree architecture are nearly as good as any network built in a comparable amount of physical space. It shows that these universal networks can efficiently simulate competing networks by means of an appropriate correspondence between network components and efficient algorithms for routing messages on the universal network. In particular, a universal network of area A can simulate competing networks with O(lg^3A) slowdown (in bit-times), using a very simple randomized routing algorithm and simple network components. Alternatively, a packet routing scheme of Leighton, Maggs, and Rao can be used in conjunction with more sophisticated switching components to achieve O(lg^2 A) slowdown. Several other important aspects of universality are also discussed. It is shown that universal networks can be constructed in area linear in the number of processors, so that there is no need to restrict the density of processors in competing networks. Also results are presented for comparisons between networks of different size or with processors of different sizes (as determined by the amount of attached memory). Of particular interest is the fact that a universal network built from sufficiently small processors can simulate (with the slowdown already quoted) any competing network of comparable size regardless of the size of processors in the competing network. In addition, many of the results given do not require the usual assumption of unit wire delay. Finally, though most of the discussion is in the two-dimensional world, the results are shown to apply in three dimensions by way of a simple demonstration of general results on graph layout in three dimensions. The second main problem considered in this thesis is channel routing when many layers of interconnect are available, a scenario that is becoming more and more meaningful as chip fabrication technologies advance. This thesis describes a system MulCh for multilayer channel routing which extends the Chameleon system developed at U. C. Berkeley. Like Chameleon, MulCh divides a multilayer problem into essentially independent subproblems of at most three layers, but unlike Chameleon, MulCh considers the possibility of using partitions comprised of a single layer instead of only partitions of two or three layers. Experimental results show that MulCh often performs better than Chameleon in terms of channel width, total net length, and number of vias. In addition to a description of MulCh as implemented, this thesis provides improved algorithms for subtasks performed by MulCh, thereby indicating potential improvements in the speed and performance of multilayer channel routing. In particular, a linear time algorithm is given for determining the minimum width required for a single-layer channel routing problem, and an algorithm is given for maintaining the density of a collection of nets in logarithmic time per net insertion. The last part of this thesis shows that straightforward techniques for implementing finite-state machines are optimal in the worst case. Specifically, for any s and k, there is a deterministic finite-state machine with s states and k symbols such that any layout algorithm requires (ks lg s) area to lay out its realization. For nondeterministic machines, there is an analogous lower bound of (ks^2) area

Survivability aspects of future optical backbone networks

In huidige glasvezelnetwerken kan een enkele vezel een gigantische hoeveelheid data dragen, ruwweg het equivalent van 25 miljoen gelijktijdige telefoongesprekken. Hierdoor zullen netwerkstoringen, zoals breuken van een glasvezelkabel, de communicatie van een groot aantal eindgebruikers verstoren. Netwerkoperatoren kiezen er dan ook voor om hun netwerk zo te bouwen dat zulke grote storingen automatisch opgevangen worden. Dit proefschrift spitst zich toe op twee aspecten rond de overleefbaarheid in toekomstige optische netwerken. De eerste doelstelling die beoogd wordt is het tot stand brengen vanrobuuste dataverbindingen over meerdere netwerken. Door voldoende betrouwbare verbindingen tot stand te brengen over een infrastructuur die niet door een enkele entiteit wordt beheerd kan men bv. weredwijd Internettelevisie van hoge kwaliteit aanbieden. De bestudeerde oplossing heeft niet enkel tot doel om deze zeer betrouwbare verbinding te berekenen, maar ook om dit te bewerkstelligen met een minimum aan gebruikte netwerkcapaciteit. De tweede doelstelling was om een antwoord te formuleren om de vraag hoe het toepassen van optische schakelsystemen gebaseerd op herconfigureerbare optische multiplexers een impact heeft op de overleefbaarheid van een optisch netwerk. Bij lagere volumes hebben optisch geschakelde netwerken weinig voordeel van dergelijke gesofistikeerde methoden. Elektronisch geschakelde netwerken vertonen geen afhankelijkheid van het datavolume en hebben altijd baat bij optimalisatie

Channel routing: Efficient solutions using neural networks

Neural network architectures are effectively applied to solve the channel routing problem. Algorithms for both two-layer and multilayer channel-width minimization, and constrained via minimization are proposed and implemented. Experimental results show that the proposed channel-width minimization algorithms are much superior in all respects compared to existing algorithms. The optimal two-layer solutions to most of the benchmark problems, not previously obtained, are obtained for the first time, including an optimal solution to the famous Deutch\u27s difficult problem. The optimal solution in four-layers for one of the be lchmark problems, not previously obtained, is obtained for the first time. Both convergence rate and the speed with which the simulations are executed are outstanding. A neural network solution to the constrained via minimization problem is also presented. In addition, a fast and simple linear-time algorithm is presented, possibly for the first time, for coloring of vertices of an interval graph, provided the line intervals are given

The Single Row Routing Problem Revisited: A Solution Based on Genetic Algorithms

With the advent of VLSI technology, circuits with more than one million transistors have been integrated onto a single chip. As the complexity of ICs grows, the time and money spent on designing the circuits become more important. A large, often dominant, part of the cost and time required to design an IC is consumed in the routing operation. The routing of carriers, such as in IC chips and printed circuit boards, is a classical problem in Computer Aided Design. With the complexity inherent in VLSI circuits, high performance routers are necessary. In this paper, a crucial step in the channel routing technique, the single row routing (SRR) problem, is considered. First, we discuss the relevance of SRR in the context of the general routing problem. Secondly, we show that heuristic algorithms are far from solving the general problem. Next, we introduce evolutionary computation, and, in particular, genetic algorithms (GAs) as a justifiable method in solving the SRR problem. Finally, an efficient O(nk) complexity technique based on GAs heuristic is obtained to solve the general SRR problem containing n nodes. Experimental results show that the algorithm is faster and can often generate better results than many of the leading heuristics proposed in the literature

Next-Generation Transport Networks Leveraging Universal Traffic Switching and Flexible Optical Transponders

Recent developments in communication technology contributed to the growth of network traffic exponentially. Cost per bit has to necessarily suffer an inverse trend, posing several challenges to network operators. Optical transport networks are no exception to this. On one hand, they have to keep up with the expectations of data speed, volume, and growth at the agreed quality-of-service (QoS), while on the other hand, a steep downward trend of the cost per bit is a matter of concern. Thus, the proper selection of network architecture, technology, resiliency schemes, and traffic handling contributes to the total cost of ownership (TCO). In this context, this chapter looks into the network architectures, including the optical transport network (OTN) switch (both traditional and universal), resiliency schemes (protection and restoration), flexible-rate line interfaces, and an overall strategy of handover in between metro and core networks. A design framework is also described and used to support the case studies reported in this chapter

Nonlinear Negotiation Approaches for Complex-Network Optimization: A Study Inspired by Wi-Fi Channel Assignment

At the present time, Wi-Fi networks are everywhere. They operate in unlicensed radio-frequency spectrum bands (divided in channels), which are highly congested. The purpose of this paper is to tackle the problem of channel assignment in Wi-Fi networks. To this end, we have modeled the networks as multilayer graphs, in a way that frequency channel assignment becomes a graph coloring problem. For a high number and variety of scenarios, we have solved the problem with two different automated negotiation techniques: a hill-climber and a simulated annealer. As an upper bound reference for the performance of these two techniques, we have also solved the problem using a particle swarm optimizer. Results show that the annealer negotiator behaves as the best choice because it is able to obtain even better results than the particle swarm optimizer in the most complex scenarios under study, with running times one order of magnitude below. Finally, we study how different properties of the network layout affect to the performance gain that the annealer is able to obtain with respect to the particle swarm optimizer.Comment: This is a pre-print of an article published in Group Decision and Negotiation. The final version is available online at https://doi.org/10.1007/s10726-018-9600-