Viewfinder: final activity report

The VIEW-FINDER project (2006-2009) is an 'Advanced Robotics' project that seeks to apply a semi-autonomous robotic system to inspect ground safety in the event of a fire. Its primary aim is to gather data (visual and chemical) in order to assist rescue personnel. A base station combines the gathered information with information retrieved from off-site sources. The project addresses key issues related to map building and reconstruction, interfacing local command information with external sources, human-robot interfaces and semi-autonomous robot navigation. The VIEW-FINDER system is a semi-autonomous; the individual robot-sensors operate autonomously within the limits of the task assigned to them, that is, they will autonomously navigate through and inspect an area. Human operators monitor their operations and send high level task requests as well as low level commands through the interface to any nodes in the entire system. The human interface has to ensure the human supervisor and human interveners are provided a reduced but good and relevant overview of the ground and the robots and human rescue workers therein

Flexible data input layer architecture (FDILA) for quick-response decision making tools in volatile manufacturing systems

This paper proposes the foundation for a flexible data input management system as a vital part of a generic solution for quick-response decision making. Lack of a comprehensive data input layer between data acquisition and processing systems has been realized and thought of. The proposed FDILA is applicable to a wide variety of volatile manufacturing environments. It provides a generic platform that enables systems designers to define any number of data entry points and types regardless of their make and specifications in a standard fashion. This is achieved by providing a variable definition layer immediately on top of the data acquisition layer and before data pre-processing layer. For proof of concept, National Instruments’ Labview data acquisition software is used to simulate a typical shop floor data acquisition system. The extracted data can then be fed into a data mining module that builds cost modeling functions involving the plant’s Key Performance Factors

Biosignal and context monitoring: Distributed multimedia applications of body area networks in healthcare

We are investigating the use of Body Area Networks (BANs), wearable sensors and wireless communications for measuring, processing, transmission, interpretation and display of biosignals. The goal is to provide telemonitoring and teletreatment services for patients. The remote health professional can view a multimedia display which includes graphical and numerical representation of patients’ biosignals. Addition of feedback-control enables teletreatment services; teletreatment can be delivered to the patient via multiple modalities including tactile, text, auditory and visual. We describe the health BAN and a generic mobile health service platform and two context aware applications. The epilepsy application illustrates processing and interpretation of multi-source, multimedia BAN data. The chronic pain application illustrates multi-modal feedback and treatment, with patients able to view their own biosignals on their handheld device

Integration of LiDAR and stereoscopic imagery for route corridor surveying

Transportation networks are, typically, one of the most economic valuable resources for any nation requiring a large percentage of GDP to build and maintain. These route corridors attract their own unique set of spatial information requirements in terms of overall management including planning, engineering and operation. Various disciplines within a road management agency require high quality, spatial data of objects and features occurring along these networks from road infrastructure, sub-surface pavement condition through to modelling noise. This paper examines the integration of relatively novel sensor data against some pressing spatial information requirements for a small European road management agency. LiDAR systems are widely available and now used to record data from both aerial and terrestrial survey platforms. One of the chief LiDAR outputs are X,Y,Z points enabling a reliable 2.5-D geometric surface to be produced. Stereoscopic imagery is also collected from similar airborne and terrestrial mobile platforms. Both provide different datasets in terms of their respective optical and geometric properties. For example, stereoscopic cameras mounted on a survey vehicle record different data compared to LiDAR mounted near vertically on an airborne platform. Airborne LiDAR provides a more comprehensive geometric record whereas stereoscopic imagery can be used to provide a more comprehensive visual descriptor of the immediate route corridor. Acquisition systems for both sensors are relatively well understood and developed. Both systems collect large volumes of data that require a significant amount of data processing in order to produce useful information. A more efficient result can be achieved by integrating these two datasets within a GIS. The preliminary results of integration of airborne LiDAR with ground based stereo imaging systems are presented. How well this integration satisfies the growing spatial information requirements of the road agency are also examined

Automated Global Feature Analyzer - A Driver for Tier-Scalable Reconnaissance

For the purposes of space flight, reconnaissance field geologists have trained to become astronauts. However, the initial forays to Mars and other planetary bodies have been done by purely robotic craft. Therefore, training and equipping a robotic craft with the sensory and cognitive capabilities of a field geologist to form a science craft is a necessary prerequisite. Numerous steps are necessary in order for a science craft to be able to map, analyze, and characterize a geologic field site, as well as effectively formulate working hypotheses. We report on the continued development of the integrated software system AGFA: automated global feature analyzerreg, originated by Fink at Caltech and his collaborators in 2001. AGFA is an automatic and feature-driven target characterization system that operates in an imaged operational area, such as a geologic field site on a remote planetary surface. AGFA performs automated target identification and detection through segmentation, providing for feature extraction, classification, and prioritization within mapped or imaged operational areas at different length scales and resolutions, depending on the vantage point (e.g., spaceborne, airborne, or ground). AGFA extracts features such as target size, color, albedo, vesicularity, and angularity. Based on the extracted features, AGFA summarizes the mapped operational area numerically and flags targets of "interest", i.e., targets that exhibit sufficient anomaly within the feature space. AGFA enables automated science analysis aboard robotic spacecraft, and, embedded in tier-scalable reconnaissance mission architectures, is a driver of future intelligent and autonomous robotic planetary exploration

Spatial combination of sensor data deriving from mobile platforms for precision farming applications

This thesis combines optical sensors on a ground and on an aerial platform for field measurements in wheat, to identify nitrogen (N) levels, estimating biomass (BM) and predicting yield. The Multiplex Research (MP) fluorescence sensor was used for the first time in wheat. The individual objectives were: (i) Evaluation of different available sensors and sensor platforms used in Precision Farming (PF) to quantify the crop nutrition status, (ii) Acquisition of ground and aerial sensor data with two ground spectrometers, an aerial spectrometer and a ground fluorescence sensor, (iii) Development of effective post-processing methods for correction of the sensor data, (iv) Analysis and evaluation of the sensors with regard to the mapping of biomass, yield and nitrogen content in the plant, and (v) Yield simulation as a function of different sensor signals. This thesis contains three papers, published in international peer-reviewed journals. The first publication is a literature review on sensor platforms used in agricultural research. A subdivision of sensors and their applications was done, based on a detailed categorization model. It evaluates strengths and weaknesses, and discusses research results gathered with aerial and ground platforms with different sensors. Also, autonomous robots and swarm technologies suitable for PF tasks were reviewed. The second publication focuses on spectral and fluorescence sensors for BM, yield and N detection. The ground sensors were mounted on the Hohenheim research sensor platform Sensicle. A further spectrometer was installed in a fixed-wing Unmanned Aerial Vehicle (UAV). In this study, the sensors of the Sensicle and the UAV were used to determine plant characteristics and yield of three-year field trials at the research station Ihinger Hof, Renningen (Germany), an institution of the University of Hohenheim, Stuttgart (Germany). Winter wheat (Triticum aestivum L.) was sown on three research fields, with different N levels applied to each field. The measurements in the field were geo-referenced and logged with an absolute GPS accuracy of ±2.5 cm. The GPS data of the UAV was corrected based on the pitch and roll position of the UAV at each measurement. In the first step of the data analysis, raw data obtained from the sensors was post-processed and was converted into indices and ratios relating to plant characteristics. The converted ground sensor data were analysed, and the results of the correlations were interpreted related to the dependent variables (DV) BM weight, wheat yield and available N. The results showed significant positive correlations between the DVs and the Sensicle sensor data. For the third paper, the UAV sensor data was included into the evaluations. The UAV data analysis revealed low significant results for only one field in the year 2011. A multirotor UAV was considered as a more viable aerial platform, that allows for more precision and higher payload. Thereby, the ground sensors showed their strength at a close measuring distance to the plant and a smaller measurement footprint. The results of the two ground spectrometers showed significant positive correlations between yield and the indices from CropSpec, NDVI (Normalised Difference Vegetation Index) and REIP (Red-Edge Inflection Point). Also, FERARI and SFR (Simple Fluorescence Ratio) of the MP fluorescence sensor were chosen for the yield prediction model analysis. With the available N, CropSpec and REIP correlated significantly. The BM weight correlated with REIP even at a very early growing stage (Z 31), and with SAVI (Soil-Adjusted Vegetation Index) at ripening stage (Z 85). REIP, FERARI and SFR showed high correlations to the available N, especially in June and July. The ratios and signals of the MP sensor were highly significant compared to the BM weight above Z 85. Both ground spectrometers are suitable for data comparison and data combination with the active MP fluorescence sensor. Through a combination of fluorescence ratios and spectrometer indices, linear models for the prediction of wheat yield were generated, correlating significantly over the course of the vegetative period for research field Lammwirt (LW) in 2012. The best model for field LW in 2012 was selected for cross-validation with the measurements of the fields Inneres Täle (IT) and Riech (RI) in 2011 and 2012. However, it was not significant. By exchanging only one spectral index with a fluorescence ratio in a similar linear model, it showed significant correlations. This work successfully proves the combination of different sensor ratios and indices for the detection of plant characteristics, offering better and more robust predictions and quantifications of field parameters without employing destructive methods. The MP sensor proved to be universally applicable, showing significant correlations to the investigated characteristics such as BM weight, wheat yield and available N.Diese Arbeit kombiniert optische Sensoren auf einer Sensorplattform (SPF) am Boden und in der Luft bei Messungen in Weizen, um die Stickstoff-(N)-Werte zu identifizieren, während gleichzeitig die Biomasse (BM) geschätzt und der Ertrag vorhergesagt wird. Erstmals wurde hierfür der Fluoreszenzsensor Multiplex Research (MP) in Weizen eingesetzt. Die Ziele dieser Dissertation umfassen: (i) Bewertung verfügbarer Sensoren und SPF, die in der Präzisionslandwirtschaft zur Quantifizierung des Ernährungszustandes von Nutzpflanzen verwendet werden, (ii) Erfassung von Daten mit zwei Spektrometern am Boden, einem Spektrometer auf einem Modellflugzeug (UAV) und einem Fluoreszenzsensor am Boden, (iii) Erstellung effektiver Nachbearbeitungsmethoden für die Datenkorrektur, (iv) Analyse und Evaluation der Sensoren für die Abbildung der BM, des Ertrags und des N-Gehaltes in der Pflanze, und (v) Ertragssimulation als Funktion von Merkmalen unterschiedlicher Sensorsignale. Diese Arbeit enthält drei Artikel, die in international begutachteten Fachzeitschriften publiziert wurden. Die erste Veröffentlichung ist eine Literaturrecherche über SPF in der Agrarforschung. Ein detailliertes Kategorisierungsmodell wird für eine allgemeine Unterteilung der Sensoren und deren Anwendungsgebiete herangenommen, die Stärken und Schwächen bewertet, und die Forschungsergebnisse von Luft- und Bodenplattformen mit unterschiedlicher Sensorik diskutiert. Außerdem werden autonome Roboter und für landwirtschaftliche Aufgaben geeignete Schwarmtechnologien beschrieben. Die zweite Publikation fokussiert sich auf Spektral- und Fluoreszenzsensoren für die Erfassung von BM, Ertrag und N. In der Arbeit wurden die Bodensensoren auf der Hohenheimer Forschungs-SPF Sensicle und der Sensor auf dem UAV in dreijährigen Feldversuchen auf der Versuchsstation Ihinger Hof der Universität Hohenheim in Renningen für die Bestimmung von Pflanzenmerkmalen und des Ertrags eingesetzt. Auf drei Versuchsfeldern wurde Winterweizen ausgesät, und in einem randomisierten Versuchsdesign unterschiedliche N-Düngestufen angelegt. Die Sensormessungen im Feld wurden mit einer absoluten GPS Genauigkeit von ±2,5 cm verortet. Die GPS Daten des UAVs wurden mittels der Nick- und Rollposition lagekorrigiert. Im ersten Schritt der Datenanalyse wurden die Sensorrohdaten nachbearbeitet und in Indizes und Ratios umgerechnet. Die Bodensensordaten wurden analysiert, und die Ergebnisse der Korrelationen in Bezug zu den abhängigen Variablen (DV) BM-Gewicht, Weizenertrag, verfügbarer sowie aufgenommener N dargestellt. Die Ergebnisse zeigen signifikant positive Korrelationen zwischen den DVs und den Sensicle-Sensordaten. Für die dritte Publikation wurden die Sensordaten des UAV in die Auswertungen miteinbezogen. Die Analyse der UAV Daten zeigte niedrige signifikante Ergebnisse für nur ein Feld im Versuchsjahr 2011. Ein Multikopter wird als zuverlässigere Luftplattform erachtet, der mehr Präzision und eine höhere Nutzlast ermöglicht. Die Sensoren auf dem Sensicle zeigten ihren Vorteil bedingt durch einen kürzeren Messabstand zur Pflanze und eine kleinere Messfläche. Die Ergebnisse der beiden Sensicle-Spektrometer zeigten signifikant positive Korrelationen zwischen dem Ertrag und den Indizes von CropSpec, NDVI (Normalised Difference Vegetation Index) und REIP (Red-Edge Inflection Point). Auch FERARI und SFR (Simple Fluorescence Ratio) des MP-Sensors wurden für die Analyse des Ertragsvorhersagemodells ausgewählt. Mit dem verfügbaren N korrelierten CropSpec und REIP hochsignifikant. Das BM-Gewicht korrelierte bereits ab einem sehr frühen Wachstumsstadium (Z31) mit REIP und im Reifestadium (Z85) mit SAVI (Soil-Adjusted Vegetation Index). REIP, FERARI und SFR zeigten hohe Korrelationen mit dem verfügbaren N, insbesondere im Juni und Juli. Die Ratios und Signale des MP Sensors sind vor allem ab Z85 gegenüber dem BM-Gewicht hochsignifikant. Durch eine Kombination von Fluoreszenzwerten und Spektrometerindizes wurden lineare Modelle zur Vorhersage des Weizenertrags erstellt, die im Verlauf der Vegetationsperiode für das Versuchsfeld Lammwirt (LW) im Jahr 2012 signifikant korrelierten. Das beste Modell für das Feld LW im Jahr 2012 wurde für die Kreuzvalidierung mit den Messungen der Versuchsfelder Inneres Täle (IT) und Riech (RI) in den Jahren 2011 und 2012 ausgewählt. Sie waren nicht signifikant, jedoch zeigten sich durch den Austausch nur eines Spektralindexes mit einem Fluoreszenzratio in einem ähnlichen linearen Modell signifikante Korrelationen. Die vorliegende Arbeit zeigt erfolgreich, dass sich die Kombination verschiedener Sensorwerte und Sensorindizes zur Erkennung von Pflanzenmerkmalen gut eignet, und ohne den Einsatz destruktiver Methoden die Möglichkeit für bessere und robustere Vorhersagen bietet. Vor allem der MP-Fluoreszenzsensor erwies sich als universell einsetzbarer Sensor, der signifikante Korrelationen zu den untersuchten Merkmalen BM-Gewicht, Weizenertrag und verfügbarem N aufzeigte

Unmanned Aerial Systems: Research, Development, Education & Training at Embry-Riddle Aeronautical University

With technological breakthroughs in miniaturized aircraft-related components, including but not limited to communications, computer systems and sensors, state-of-the-art unmanned aerial systems (UAS) have become a reality. This fast-growing industry is anticipating and responding to a myriad of societal applications that will provide new and more cost-effective solutions that previous technologies could not, or will replace activities that involved humans in flight with associated risks. Embry-Riddle Aeronautical University has a long history of aviation-related research and education, and is heavily engaged in UAS activities. This document provides a summary of these activities, and is divided into two parts. The first part provides a brief summary of each of the various activities, while the second part lists the faculty associated with those activities. Within the first part of this document we have separated UAS activities into two broad areas: Engineering and Applications. Each of these broad areas is then further broken down into six sub-areas, which are listed in the Table of Contents. The second part lists the faculty, sorted by campus (Daytona Beach-D, Prescott-P and Worldwide-W) associated with the UAS activities. The UAS activities and the corresponding faculty are cross-referenced. We have chosen to provide very short summaries of the UAS activities rather than lengthy descriptions. If more information is desired, please contact me directly, or visit our research website (https://erau.edu/research), or contact the appropriate faculty member using their e-mail address provided at the end of this document

Recent trends and long-standing problems in archaeological remote sensing

The variety and sophistication of data sources, sensors, and platforms employed in archaeological remote sensing have increased significantly over the past decade. Projects incorporating data from UAV surveys, regional and research-driven lidar surveys, the uptake of hyperspectral imaging, the launch of high-temporal revisit satellites, the advent of multi-sensor rigs for geophysical survey, and increased use of structure from motion mean that more archaeologists are engaging with remote sensing than ever. These technological advances continue to drive research in the specialist community and provide reasons for optimism about future applications, but many social and technical obstacles to the integration of remote sensing into archaeological research and heritage management remain. This article addresses the challenges of contemporary archaeological remote sensing by briefly reviewing trends and then focusing on providing a critical overview of the main structural problems. The discussion here concentrates on topics that have dominated the discourse in recent archaeological literature and featured prominently in ongoing fieldwork for the past decade across three broad segments of landscape archaeology: data collection in the field, the current state of data access and archives, and processing and interpretation