Comparative Studies on Decentralized Multiloop PID Controller Design Using Evolutionary Algorithms

Decentralized PID controllers have been designed in this paper for simultaneous tracking of individual process variables in multivariable systems under step reference input. The controller design framework takes into account the minimization of a weighted sum of Integral of Time multiplied Squared Error (ITSE) and Integral of Squared Controller Output (ISCO) so as to balance the overall tracking errors for the process variables and required variation in the corresponding manipulated variables. Decentralized PID gains are tuned using three popular Evolutionary Algorithms (EAs) viz. Genetic Algorithm (GA), Evolutionary Strategy (ES) and Cultural Algorithm (CA). Credible simulation comparisons have been reported for four benchmark 2x2 multivariable processes.Comment: 6 pages, 9 figure

Robust control of room temperature and relative humidity using advanced nonlinear inverse dynamics and evolutionary optimisation

A robust controller is developed, using advanced nonlinear inverse dynamics (NID) controller design and genetic algorithm optimisation, for room temperature control. The performance is evaluated through application to a single zone dynamic building model. The proposed controller produces superior performance when compared to the NID controller optimised with a simple optimisation algorithm, and classical PID control commonly used in the buildings industry. An improved level of thermal comfort is achieved, due to fast and accurate tracking of the setpoints, and energy consumption is shown to be reduced, which in turn means carbon emissions are reduced

DIFFERENTIAL EVOLUTION FOR OPTIMIZATION OF PID GAIN IN ELECTRICAL DISCHARGE MACHINING CONTROL SYSTEM

ABSTRACT PID controller of servo control system maintains the gap between Electrode and workpiece in Electrical Dis- charge Machining (EDM). Capability of the controller is significant since machining process is a stochastic phenomenon and physical behaviour of the discharge is unpredictable. Therefore, a Proportional Integral Derivative (PID) controller using Differential Evolution (DE) algorithm is designed and applied to an EDM servo actuator system in order to find suitable gain parameters. Simulation results verify the capabilities and effectiveness of the DE algorithm to search the best configuration of PID gain to maintain the electrode position. Keywords: servo control system; electrical discharge machining; proportional integral derivative; con- troller tuning; differential evolution

On-line multiobjective automatic control system generation by evolutionary algorithms

Evolutionary algorithms are applied to the on- line generation of servo-motor control systems. In this paper, the evolving population of controllers is evaluated at run-time via hardware in the loop, rather than on a simulated model. Disturbances are also introduced at run-time in order to pro- duce robust performance. Multiobjective optimisation of both PI and Fuzzy Logic controllers is considered. Finally an on-line implementation of Genetic Programming is presented based around the Simulink standard blockset. The on-line designed controllers are shown to be robust to both system noise and ex- ternal disturbances while still demonstrating excellent steady- state and dvnamic characteristics

Optimisation of Mobile Communication Networks - OMCO NET

The mini conference “Optimisation of Mobile Communication Networks” focuses on advanced methods for search and optimisation applied to wireless communication networks. It is sponsored by Research & Enterprise Fund Southampton Solent University. The conference strives to widen knowledge on advanced search methods capable of optimisation of wireless communications networks. The aim is to provide a forum for exchange of recent knowledge, new ideas and trends in this progressive and challenging area. The conference will popularise new successful approaches on resolving hard tasks such as minimisation of transmit power, cooperative and optimal routing

Real-coded genetic algorithm for system identification and controller tuning

AbstractThis paper presents an application of real-coded genetic algorithm (RGA) for system identification and controller tuning in process plants. The genetic algorithm is applied sequentially for system identification and controller tuning. First GA is applied to identify the changes in system parameters. Once the process parameters are identified, the optimal controller parameters are identified using GA. In the proposed genetic algorithm, the optimization variables are represented as floating point numbers. Also, cross over and mutation operators that can directly deal with the floating point numbers are used. The proposed approach has been applied for system identification and controller tuning in nonlinear pH process. The simulation results show that the GA based approach is effective in identifying the parameters of the system and the nonlinearity at various operating points in the nonlinear system

Performance-based control system design automation via evolutionary computing

This paper develops an evolutionary algorithm (EA) based methodology for computer-aided control system design (CACSD) automation in both the time and frequency domains under performance satisfactions. The approach is automated by efficient evolution from plant step response data, bypassing the system identification or linearization stage as required by conventional designs. Intelligently guided by the evolutionary optimization, control engineers are able to obtain a near-optimal ‘‘off-thecomputer’’ controller by feeding the developed CACSD system with plant I/O data and customer specifications without the need of a differentiable performance index. A speedup of near-linear pipelineability is also observed for the EA parallelism implemented on a network of transputers of Parsytec SuperCluster. Validation results against linear and nonlinear physical plants are convincing, with good closed-loop performance and robustness in the presence of practical constraints and perturbations

Gain tuning of proportional integral controller based on multiobjective optimization and controller hardware-in-loop microgrid setup

Proportional integral (PI) control is a commonly used industrial controller framework. This PI controller needs to be tuned to obtain desired response from the process under control. Tuning methods available in literature by and large need sophisticated mathematical modelling, and simplifications in the plant model to perform gain tuning. The process of obtaining approximate plant model conceivably become time consuming and produce less accurate results. This is due to the simplifications desired by the power system applications especially when power electronics based inverters are used in it. Optimal gain selection for PI controllers becomes crucial for microgrid application. Because of the presence of inverter based distributed energy resources. In the proposed approach, a multi-objective genetic algorithm is used to tune the controller to obtain expected step response characteristics. The proposed approach do not need simplified mathematical models. This prevents the need for obtaining unfailing plant models to maintain the fidelity of modelling. Microgrid system and the PI controller are modelled in different software, hardware platform and tuned using the proposed approach. Gain values for PI controller in these different platform are tuned using the same objective function and multi-objective optimization. This proves the re-usability, scalability, and modularity of the proposed tuning algorithm. Three different combination of software, hardware platform are proposed. First, the process and the PI controller are modelled in a computer based hardware. In order to increase the speed of the multi-objective optimization in the computer based hardware parallel computing is employed. This is a natural fit for paralleling the GA based optimization. Second, both the plant and control representation are modelled in the real time digital simulator (RTDS). Finally, a controller hardware in loop platform is used. In this platform, the plant will be modelled in RTDS and the PI controller will be modelled in an FPGA based hardware platform. Results indicate that the proposed approach has promising potentials since it does not need to simplify the switching model and can effectively solve the complicated tuning procedure using parallel computing. Similar advantage could be said for RTDS based tuning because RTDS simulates the models in real time