717 research outputs found
Smart cmos image sensor for 3d measurement
3D measurements are concerned with extracting visual information from the geometry of visible surfaces and interpreting the 3D coordinate data thus obtained, to detect or track the position or reconstruct the profile of an object, often in real time. These systems necessitate image sensors with high accuracy of position estimation and high frame rate of data processing for handling large volumes of data. A standard imager cannot address the requirements of fast image acquisition and processing, which are the two figures of merit for 3D measurements. Hence, dedicated VLSI imager architectures are indispensable for designing these high performance sensors. CMOS imaging technology provides potential to integrate image processing algorithms on the focal plane of the device, resulting in smart image sensors, capable of achieving better processing features in handling massive image data. The objective of this thesis is to present a new architecture of smart CMOS image sensor for real time 3D measurement using the sheet-beam projection methods based on active triangulation. Proposing the vision sensor as an ensemble of linear sensor arrays, all working in parallel and processing the entire image in slices, the complexity of the image-processing task shifts from O (N 2 ) to O (N). Inherent also in the design is the high level of parallelism to achieve massive parallel processing at high frame rate, required in 3D computation problems. This work demonstrates a prototype of the smart linear sensor incorporating full testability features to test and debug both at device and system levels. The salient features of this work are the asynchronous position to pulse stream conversion, multiple images binarization, high parallelism and modular architecture resulting in frame rate and sub-pixel resolution suitable for real time 3D measurements
A Survey on FPGA-Based Sensor Systems: Towards Intelligent and Reconfigurable Low-Power Sensors for Computer Vision, Control and Signal Processing
The current trend in the evolution of sensor systems seeks ways to provide more accuracy and resolution, while at the same time decreasing the size and power consumption. The use of Field Programmable Gate Arrays (FPGAs) provides specific reprogrammable hardware technology that can be properly exploited to obtain a reconfigurable sensor system. This adaptation capability enables the implementation of complex applications using the partial reconfigurability at a very low-power consumption. For highly demanding tasks FPGAs have been favored due to the high efficiency provided by their architectural flexibility (parallelism, on-chip memory, etc.), reconfigurability and superb performance in the development of algorithms. FPGAs have improved the performance of sensor systems and have triggered a clear increase in their use in new fields of application. A new generation of smarter, reconfigurable and lower power consumption sensors is being developed in Spain based on FPGAs. In this paper, a review of these developments is presented, describing as well the FPGA technologies employed by the different research groups and providing an overview of future research within this field.The research leading to these results has received funding from the Spanish Government and European FEDER funds (DPI2012-32390), the Valencia Regional Government (PROMETEO/2013/085) and the University of Alicante (GRE12-17)
Embodied neuromorphic intelligence
The design of robots that interact autonomously with the environment and exhibit complex behaviours is an open challenge that can benefit from understanding what makes living beings fit to act in the world. Neuromorphic engineering studies neural computational principles to develop technologies that can provide a computing substrate for building compact and low-power processing systems. We discuss why endowing robots with neuromorphic technologies – from perception to motor control – represents a promising approach for the creation of robots which can seamlessly integrate in society. We present initial attempts in this direction, highlight open challenges, and propose actions required to overcome current limitations
Recommended from our members
ANALOG SIGNAL PROCESSING SOLUTIONS AND DESIGN OF MEMRISTOR-CMOS ANALOG CO-PROCESSOR FOR ACCELERATION OF HIGH-PERFORMANCE COMPUTING APPLICATIONS
Emerging applications in the field of machine vision, deep learning and scientific simulation require high computational speed and are run on platforms that are size, weight and power constrained. With the transistor scaling coming to an end, existing digital hardware architectures will not be able to meet these ever-increasing demands. Analog computation with its rich set of primitives and inherent parallel architecture can be faster, more efficient and compact for some of these applications. The major contribution of this work is to show that analog processing can be a viable solution to this problem. This is demonstrated in the three parts of the dissertation.
In the first part of the dissertation, we demonstrate that analog processing can be used to solve the problem of stereo correspondence. Novel modifications to the algorithms are proposed which improves the computational speed and makes them efficiently implementable in analog hardware. The analog domain implementation provides further speedup in computation and has lower power consumption than a digital implementation.
In the second part of the dissertation, a prototype of an analog processor was developed using commercially available off-the-shelf components. The focus was on providing experimental results that demonstrate functionality and to show that the performance of the prototype for low-level and mid-level image processing tasks is equivalent to a digital implementation. To demonstrate improvement in speed and power consumption, an integrated circuit design of the analog processor was proposed, and it was shown that such an analog processor would be faster than state-of-the-art digital and other analog processors.
In the third part of the dissertation, a memristor-CMOS analog co-processor that can perform floating point vector matrix multiplication (VMM) is proposed. VMM computation underlies some of the major applications. To demonstrate the working of the analog co-processor at a system level, a new tool called PSpice Systems Option is used. It is shown that the analog co-processor has a superior performance when compared to the projected performances of digital and analog processors. Using the new tool, various application simulations for image processing and solution to partial differential equations are performed on the co-processor model
Miniaturized embedded stereo vision system (MESVS)
Stereo vision is one of the fundamental problems of computer vision. It is also one of the oldest and heavily investigated areas of 3D vision. Recent advances of stereo matching methodologies and availability of high performance and efficient algorithms along with availability of fast and affordable hardware technology, have allowed researchers to develop several stereo vision systems capable of operating at real-time. Although a multitude of such systems exist in the literature, the majority of them concentrates only on raw performance and quality rather than factors such as dimension, and power requirement, which are of significant importance in the embedded settings.
In this thesis a new miniaturized embedded stereo vision system (MESVS) is presented, which is miniaturized to fit within a package of 5x5cm, is power efficient, and cost-effective. Furthermore, through application of embedded programming techniques and careful optimization, MESVS achieves the real-time performance of 20 frames per second. This work discusses the various challenges involved regarding design and implementation of this system and the measures taken to tackle them
Workshop on multisensor integration in manufacturing automation
Journal ArticleMany people helped make the Workshop a success, but special thanks must be given to Howard Moraff for his support, and to Vicky Jackson for her efforts in making things run smoothly. Finally, thanks to Jake Aggarwal for helping to start the ball rolling
Survey of FPGA applications in the period 2000 – 2015 (Technical Report)
Romoth J, Porrmann M, Rückert U. Survey of FPGA applications in the period 2000 – 2015 (Technical Report).; 2017.Since their introduction, FPGAs can be seen in more and more different fields of applications. The key advantage is the combination of software-like flexibility with the performance otherwise common to hardware. Nevertheless, every application field introduces special requirements to the used computational architecture. This paper provides an overview of the different topics FPGAs have been used for in the last 15 years of research and why they have been chosen over other processing units like e.g. CPUs
Implementing video compression algorithms on reconfigurable devices
The increasing density offered by Field Programmable Gate Arrays(FPGA), coupled with their short design cycle, has made them a popular choice for implementing a wide range of algorithms and complete systems. In this thesis the implementation of video compression algorithms on FPGAs is studied. Two areas are specifically focused on; the integration of a video encoder into a complete
system and the power consumption of FPGA based video encoders.
Two FPGA based video compression systems are described, one which targets surveillance applications and one which targets video conferencing applications. The FPGA video surveillance system makes use of a novel memory format to
improve the efficiency with which input video sequences can be loaded over the system bus.
The power consumption of a FPGA video encoder is analyzed. The results indicating that the motion estimation encoder stage requires the most power consumption. An algorithm, which reuses the intra prediction results generated during the encoding process, is then proposed to reduce the power consumed on an FPGA video encoder’s external memory bus. Finally, the power reduction algorithm is implemented within an FPGA video encoder. Results are given showing that, in addition to reducing power on the external memory bus, the algorithm also reduces power in the motion estimation stage of a FPGA based video encoder
An annotated bibligraphy of multisensor integration
technical reportIn this paper we give an annotated bibliography of the multisensor integration literature
- …