Efficient medium access control protocol for vehicular ad-hoc networks

Intelligent transportation systems (ITS) have enjoyed a tremendous growth in the last decade and the advancement in communication technologies has played a big role behind the success of ITS. Inter-vehicle communication (IVC) is a critical requirement for ITS and due to the nature of communication, vehicular ad-hoc network technology (VANET) is the most suitable communication technology for inter-vehicle communications. In Practice, however, VANET poses some extreme challenges including dropping out of connections as the moving vehicle moves out of the coverage range, joining of new nodes moving at high speeds, dynamic change in topology and connectivity, time variability of signal strength, throughput and time delay. One of the most challenging issues facing vehicular networks lies in the design of efficient resource management schemes, due to the mobile nature of nodes, delay constraints for safety applications and interference. The main application of VANET in ITS lies in the exchange of safety messages between nodes. Moreover, as the wireless access in vehicular environment (WAVE) moves closer to reality, management of these networks is of increasing concern for ITS designers and other stakeholder groups. As such, management of resources plays a significant role in VANET and ITS. For resource management in VANET, a medium access control protocol is used, which makes sure that limited resources are distributed efficiently. In this thesis, an efficient Multichannel Cognitive MAC (MCM) is developed, which assesses the quality of channel prior to transmission. MCM employs dynamic channel allocation and negotiation algorithms to achieve a significant improvement in channel utilisation, system reliability, and delay constraints while simultaneously addressing Quality of Service. Moreover, modified access priority parameters and safety message acknowledgments will be used to improve the reliability of safety messages. The proposed protocols are implemented using network simulation tools. Extensive experiments demonstrated a faster and more efficient reception of safety messages compared to existing VANET technologies. Finally, improvements in delay and packet delivery ratios are presented

Comunicações sem fios confiáveis para aplicações veiculares

Doutoramento em Engenharia ElectrotécnicaIn the last decades the number of vehicles travelling in European road has raised significantly. Unfortunately, this brought a very high number of road accidents and consequently various injuries and fatalities. Even after the introduction of passive safety systems, such as seat belts, airbags, and some active safety systems, such as electronic brake system (ABS) and electronic stabilization (ESP), the number of accidents is still too high. Approximately eight per cent of the fatal accidents occur in motorways, in the Portuguese case, the number of fatalities has remained constant in the first decade of the 21st century. The evolution of wireless communications, along with the north-American and European policies that reserve spectrum near the 5,9GHz band for safety applications in the vehicular environment, has lead to the development of several standards. Many of these applications are based on the possibility of using a wireless communication system to warn drivers and passengers of events occurring on the road that can put at risk their own safety. Some examples of safety applications are the hard-brake warning, the wrong-way warning and the accident warning. This work aims to contribute in defining a communication protocol that guarantees the timely dissemination of safety critical events, occurring in scenarios with a high number of vehicles or in the neighbourhood of so called motorway “blackspots”, to all vehicles in the zone of interest. To ensure information integrity and user trust, the proposed system is based on the motorway infrastructure, which will validate all events reported by the vehicles with the usage of several means, such as video surveillance or other sensors. The usage of motorway infrastructure that has full motorway coverage using fixed stations also known as road side units, allows to have a global vision of the interest zone, avoiding the problems associated to networks that depend solely on vehicle to vehicle communication, generally total ad-hoc networks. By using the infrastructure, it is possible to control medium access, avoiding possible badly intended intrusions and also avoiding the phenomenon known as alarm showers or broadcast storm that occur when all vehicles want to simultaneously access the medium to warn others of a safety event. The thesis presented in this document is that it is possible to guarantee in time information about safety events, using an architecture where the road side units are coordinated among themselves, and communicate with on board units (in vehicles) that dynamically register and deregister from the system. An exhaustive and systematic state of the art of safety applications and related research projects is done, followed by a study on the available wireless communications standards that are able to support them. The set of standards IEEE802.11p and ETSI-G5 was created for this purpose and is found to be the more adequate, but care is taken to define a scenario where WAVE enabled and non-enabled vehicles can coexist. The WAVE medium access control protocol suffers from collision problems that do not guarantee a bounded delay, therefore a new protocol (V-FTT) is proposed, based on the adaptation of the Flexible Time Triggered protocol to the vehicular field. A theoretical analysis of the V-FTT applied to WAVE and ETSI-G5 is done, including quantifying a real scenario based on the A5 motorway from Lisbon to Cascais, one of the busiest Portuguese motorways. We conclude the V-FTT protocol is feasible and guarantees a bounded delay.Nas últimas décadas tem-se assistido a um aumento do número de veículos a circular nas vias rodoviárias europeias, trazendo consigo um elevado número de acidentes e como consequência muitos feridos e vítimas mortais. Apesar da introdução de sistemas de segurança passivos, tais como cintos de segurança, airbags e de alguns sistemas de segurança activos, tais como o sistema electrónico de travagem (ABS) e o sistema electrónico de estabilidade (ESP), o número de acidentes continua a ser demasiado elevado. Aproximadamente oito por cento dos acidentes fatais na Europa ocorrem em auto-estradas, no caso Português, o número de vítimas mortais tem-se mantido constante ao longo da primeira década do século XXI. A evolução das comunicações sem fios, acompanhada de políticas europeias e norte-americanas no sentido de reservar frequências próximas dos 5,9GHz para aplicações de segurança no ambiente veicular, levou à especificação de várias normas. A maior parte destas aplicações baseiam-se na possibilidade de usar um sistema confiável de comunicação sem fios para alertar os condutores e passageiros de veículos para eventos ocorridos nas estradas que possam colocar em risco a sua segurança. Exemplos de aplicações de segurança crítica são o aviso de travagem brusca, o aviso de veículo em contra mão e o aviso de acidente na estrada. Este trabalho contribui para a definição de protocolos de comunicação capazes de garantir que a informação sobre eventos relacionados com situações de segurança crítica, que ocorram em cenários com um elevado número de veículos em zonas urbanas ou na vizinhança dos chamados “pontos negros” das auto-estradas, é disseminada com pontualidade por todos os veículos localizados na zona de interesse Por uma questão da integridade das comunicações e confiança dos condutores, o sistema proposto baseia-se na infra-estrutura do concessionário da auto-estrada, que validará os eventos reportados pelos veículos usando vários meios à sua disposição, como por exemplo sistemas de videovigilância e outros sensores. O uso de uma infra-estrutura de comunicações, que dispõe de cobertura integral a partir de estações fixas, permite uma visão global da zona coberta, evitando os problemas associados a redes baseadas apenas na comunicação entre veículos, que são em geral totalmente ad-hoc. O uso da infra-estrutura permite, entre outras vantagens, controlar o acesso ao meio, evitando simultaneamente intrusões de estranhos ao sistema e o fenómeno conhecido como “chuva de alarmes” desencadeado quando todos os veículos querem aceder simultaneamente ao meio para avisar os restantes da existência dum evento de segurança crítica. A tese apresentada neste documento defende que é possível garantir informação atempada sobre eventos que põem em risco a segurança dos veículos a partir de uma arquitectura de interligação entre as estações de comunicações fixas, coordenadas entre si, e unidades móveis (veículos) que se registam e se desligam dinamicamente do sistema. Nesta tese faz-se um levantamento exaustivo e sistemático das aplicações de segurança abordando projectos de investigação relacionados, estudam-se as tecnologias de comunicação sem fios disponíveis e a sua possibilidade de suportar aplicações de segurança rodoviária. Desta análise, conclui-se que a norma norte americana WAVE/IEEE802.11p e a europeia ETSI-G5, criadas especificamente para o efeito são as que mais se adequam à finalidade desejada. Considera-se que o cenário de utilização é evolutivo, podendo coexistirem veículos que não dispõem de sistemas de comunicação com outros que suportam a norma WAVE. Dado que o protocolo de acesso ao meio proposto pela norma WAVE não garante um acesso determinístico ao meio partilhado, propõe-se um novo protocolo, o Vehicular Flexible Time-Triggered protocol (VFTT). Faz-se a análise teórica da viabilidade do protocolo proposto para a norma WAVE e respectiva norma europeia (ETSI-G5). Quantifica-se o protocolo VFTT para um cenário real: a auto-estrada A5 Lisboa-Cascais, uma das autoestradas portuguesas mais movimentadas. Conclui-se que o protocolo é viável e garante um atraso restringido temporalmente

SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS

A finales de los años noventa, y al comienzo del nuevo milenio, las redes inalámbricas han evolucionado bastante, pasando de ser sólo una tecnología prometedora para convertirse en un requisito para las actividades cotidianas en las sociedades desarrolladas. La infraestructura de transporte también ha evolucionado, ofreciendo comunicación a bordo para mejorar la seguridad vial y el acceso a contenidos de información y entretenimiento. Los requisitos de los usuarios finales se han hecho dependientes de la tecnología, lo que significa que sus necesidades de conectividad han aumentado debido a los diversos requisitos de las aplicaciones que se ejecutan en sus dispositivos móviles, tales como tabletas, teléfonos inteligentes, ordenadores portátiles o incluso ordenadores de abordo (On-Board Units (OBUs)) dentro de los vehículos. Para cumplir con dichos requisitos de conectividad, y teniendo en cuenta las diferentes redes inalámbricas disponibles, es necesario adoptar técnicas de Vertical Handover (VHO) para cambiar de red de forma transparente y sin necesidad de intervención del usuario. El objetivo de esta tesis es desarrollar algoritmos de decisión (Vertical Handover Decision Algorithms (VHDAs)) eficientes y escalables, optimizados para el contexto de las redes vehiculares. En ese sentido se ha propuesto, desarrollado y probado diferentes algoritmos de decisión basados en la infraestructura disponible en las actuales, y probablemente en las futuras, redes inalámbricas y redes vehiculares. Para ello se han combinado diferentes técnicas, métodos computacionales y modelos matemáticos, con el fin de garantizar una conectividad apropiada, y realizando el handover hacia las redes más adecuadas de manera a cumplir tanto con los requisitos de los usuarios como los requisitos de las aplicaciones. Con el fin de evaluar el contexto, se han utilizado diferentes herramientas para obtener información variada, como la disponibilidad de la red, el estado de la red, la geolocalizaciónMárquez Barja, JM. (2012). SCALABLE AND EFFICIENT VERTICAL HANDOVER DECISION ALGORITHMS IN VEHICULAR NETWORK CONTEXTS [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17869Palanci

Contribution to design a communication framework for vehicular ad hoc networks in urban scenarios

The constant mobility of people, the growing need to be always connected, the large number of vehicles that nowadays can be found in the roads and the advances in technology make Vehicular Ad hoc Networks (VANETs) be a major area of research. Vehicular Ad hoc Networks are a special type of wireless Mobile Ad hoc Networks (MANETs), which allow a group of mobile nodes configure a temporary network and maintain it without the need of a fixed infrastructure. A vehicular network presents some specific characteristics, as the very high speed of nodes. Due to this high speed the topology changes are frequent and the communication links may last only a few seconds. Smart cities are now a reality and have a direct relationship with vehicular networks. With the help of existing infrastructure such as traffic lights, we propose a scheme to update and analyse traffic density and a warning system to spread alert messages. With this, traffic lights assist vehicular networks to take proper decisions. This would ensure less congested streets. It would also be possible that the routing protocol forwards data packets to vehicles on streets with enough neighbours to increase the possibility of delivering the packets to destination. Sharing updated, reliable and real-time information, about traffic conditions, weather or security alerts, increases the need of algorithms for the dissemination of information that take into account the main beneffits and constraints of these networks. For all this, routing protocols for vehicular networks have the difficult task to select and establish transmission links to send the data packets from source to destination through multiple nodes using intermediate vehicles efficiently. The main objective of this thesis is to provide improvements in the communication framework for vehicular networks to improve decisions to select next hops in the moment to send information, in this way improving the exchange of information to provide suitable communication to minimize accidents, reduce congestion, optimize resources for emergencies, etc. Also, we include intelligence to vehicles at the moment to take routing decisions. Making them map-aware, being conscious of the presence of buildings and other obstacles in urban environments. Furthermore, our proposal considers the decision to store packets for a maximum time until finding other neighbouring nodes to forward the packets before discarding them. For this, we propose a protocol that considers multiple metrics that we call MMMR (A Multimetric, Map-Aware Routing Protocol ). MMMR is a protocol based on geographical knowledge of the environment and vehicle location. The metrics considered are the distance, the density of vehicles in transmission range, the available bandwidth and the future trajectory of the neighbouring nodes. This allows us to have a complete view of the vehicular scenario to anticipate the driver about possible changes that may occur. Thus, a node can select a node among all its neighbours, which is the best option to increase the likelihood of successful packet delivery, minimizing time and offering a level of quality and service. In the same way, being aware of the increase of information in wireless environments, we analyse the possibility of offering anonymity services. We include a mechanism of anonymity in routing protocols based on the Crowd algorithm, which uses the idea of hiding the original source of a packet. This allowed us to add some level of anonymity on VANET routing protocols. The analytical modeling of the available bandwidth between nodes in a VANET, the use of city infrastructure in a smart way, the forwarding selection in data routing byvehicles and the provision of anonymity in communications, are issues that have been addressed in this PhD thesis. In our research work we provide contributions to improve the communication framework for Vehicular Ad hoc Networks obtaining benefits toenhance the everyday of the population.La movilidad constante de las personas y la creciente necesidad de estar conectados en todo momento ha hecho de las redes vehiculares un área cuyo interés ha ido en aumento. La gran cantidad de vehículos que hay en la actualidad, y los avances tecnológicos han hecho de las redes vehiculares (VANETS, Vehicular Ad hoc Networks) un gran campo de investigación. Las redes vehiculares son un tipo especial de redes móviles ad hoc inalámbricas, las cuales, al igual que las redes MANET (Mobile Ad hoc Networks), permiten a un grupo de nodos móviles tanto configurar como mantener una red temporal por si mismos sin la necesidad de una infraestructura fija. Las redes vehiculares presentan algunas características muy representativas, por ejemplo, la alta velocidad que pueden alcanzar los nodos, en este caso vehículos. Debido a esta alta velocidad la topología cambia frecuentemente y la duración de los enlaces de comunicación puede ser de unos pocos segundos. Estas redes tienen una amplia área de aplicación, pudiendo tener comunicación entre los mismos nodos (V2V) o entre los vehículos y una infraestructura fija (V2I). Uno de los principales desafíos existentes en las VANET es la seguridad vial donde el gobierno y fabricantes de automóviles han centrado principalmente sus esfuerzos. Gracias a la rápida evolución de las tecnologías de comunicación inalámbrica los investigadores han logrado introducir las redes vehiculares dentro de las comunicaciones diarias permitiendo una amplia variedad de servicios para ofrecer. Las ciudades inteligentes son ahora una realidad y tienen una relación directa con las redes vehiculares. Con la ayuda de la infraestructura existente, como semáforos, se propone un sistema de análisis de densidad de tráfico y mensajes de alerta. Con esto, los semáforos ayudan a la red vehicular en la toma de decisiones. Así se logrará disponer de calles menos congestionadas para hacer una circulación más fluida (lo cual disminuye la contaminación). Además, sería posible que el protocolo de encaminamiento de datos elija vehículos en calles con suficientes vecinos para incrementar la posibilidad de entregar los paquetes al destino (minimizando pérdidas de información). El compartir información actualizada, confiable y en tiempo real sobre el estado del tráfico, clima o alertas de seguridad, aumenta la necesidad de algoritmos de difusión de la información que consideren los principales beneficios y restricciones de estas redes. Así mismo, considerar servicios críticos que necesiten un nivel de calidad y servicio es otro desafío importante. Por todo esto, un protocolo de encaminamiento para este tipo de redes tiene la difícil tarea de seleccionar y establecer enlaces de transmisión para enviar los datos desde el origen hacia el destino vía múltiples nodos utilizando vehículos intermedios de una manera eficiente. El principal objetivo de esta tesis es ofrecer mejoras en los sistemas de comunicación vehicular que mejoren la toma de decisiones en el momento de realizar el envío de la información, con lo cual se mejora el intercambio de información para poder ofrecer comunicación oportuna que minimice accidentes, reduzca atascos, optimice los recursos destinados a emergencias, etc. Así mismo, incluimos más inteligencia a los coches en el momento de tomar decisiones de encaminamiento de paquetes. Haciéndolos conscientes de la presencia de edificios y otros obstáculos en los entornos urbanos. Así como tomar la decisión de guardar paquetes durante un tiempo máximo de modo que se encuentre otros nodos vecinos para encaminar paquetes de información antes de descartarlo. Para esto, proponemos un protocolo basado en múltiples métricas (MMMR, A Multimetric, Map-aware Routing Protocol ) que es un protocolo geográfio basado en el conocimiento del entorno y localización de los vehículos. Las métricas consideradas son la distancia, la densidad de vehículos en el área de transmisión, el ancho de banda disponible y la trayectoria futura de los nodos vecinos. Esto nos permite tener una visión completa del escenario vehicular y anticiparnos a los posibles cambios que puedan suceder. Así, un nodo podrá seleccionar aquel nodo entre todos sus vecinos posibles que sea la mejor opción para incrementar la posibilidad de entrega exitosa de paquetes, minimizando tiempos y ofreciendo un cierto nivel de calidad y servicio. De la misma manera, conscientes del incremento de información que circula por medios inalámbricos, se analizó la posibilidad de servicios de anonimato. Incluimos pues un mecanismo de anonimato en protocolos de encaminamiento basado en el algoritmo Crowd, que se basa en la idea de ocultar la fuente original de un paquete. Esto nos permitió añadir cierto nivel de anonimato que pueden ofrecer los protocolos de encaminamiento. El modelado analítico del ancho de banda disponible entre nodos de una VANET, el uso de la infraestructura de la ciudad de una manera inteligente, la adecuada toma de decisiones de encaminamiento de datos por parte de los vehículos y la disposición de anonimato en las comunicaciones, son problemas que han sido abordados en este trabajo de tesis doctoral que ofrece contribuciones a la mejora de las comunicaciones en redes vehiculares en entornos urbanos aportando beneficios en el desarrollo de la vida diaria de la población

Supporting Internet Access and Quality of Service in Distributed Wireless Ad Hoc Networks

In this era of wireless hysteria, with continuous technological advances in wireless communication and new wireless technologies becoming standardized at a fast rate, we can expect an increased interest for wireless networks, such as ad hoc and mesh networks. These networks operate in a distributed manner, independent of any centralized device. In order to realize the practical benefits of ad hoc networks, two challenges (among others) need to be considered: distributed QoS guarantees and multi-hop Internet access. In this thesis we present conceivable solutions to both of these problems. An autonomous, stand-alone ad hoc network is useful in many cases, such as search and rescue operations and meetings where participants wish to quickly share information. However, an ad hoc network connected to the Internet is even more desirable. This is because Internet plays an important role in the daily life of many people by offering a broad range of services. In this thesis we present AODV+, which is our solution to achieve this network interconnection between a wireless ad hoc network and the wired Internet. Providing QoS in distributed wireless networks is another challenging, but yet important, task mainly because there is no central device controlling the medium access. In this thesis we propose EDCA with Resource Reservation (EDCA/RR), which is a fully distributed MAC scheme that provides QoS guarantees by allowing applications with strict QoS requirements to reserve transmission time for contention-free medium access. Our scheme is compatible with existing standards and provides both parameterized and prioritized QoS. In addition, we present the Distributed Deterministic Channel Access (DDCA) scheme, which is a multi-hop extension of EDCA/RR and can be used in wireless mesh networks. Finally, we have complemented our simulation studies with real-world ad hoc and mesh network experiments. With the experience from these experiments, we obtained a clear insight into the limitations of wireless channels. We could conclude that a wise design of the network architecture that limits the number of consecutive wireless hops may result in a wireless mesh network that is able to satisfy users’ needs. Moreover, by using QoS mechanisms like EDCA/RR or DDCA we are able to provide different priorities to traffic flows and reserve resources for the most time-critical applications

Handoff management for infotainment services over vehicular networks

Intelligent Transportation Systems (ITS) has impulsed the vehicular communications at the present time. The vehicular communications field is a hot research topic and is attracting a great interest in the automotive industry and telecommunications. There are essentially two main lines of work: (1) communication services related to road safety and traffic information; and (2) information and entertainment services, also named infotainment services. These latter services include both transmitting multimedia (voice over IP, streaming, on-line gaming, etc.) and classic data services (e-mail, access to private networks, web browsing, file sharing, etc.). In this thesis we will focus on these infotainment services because further research in this immature research field is necessary and, until nowadays, the main effort of the research community regarding vehicular communication has been focused on road safety and traffic information. Vehicular nodes need to be reached from the Internet and vice versa to be able to access to infotainment services. While vehicles move along the road infrastructure, they change their wireless point of attachment to the network. During this process, connectivity breaks down until the vehicle is connected again to a new road side unit in its area. This disconnection causes a disruption in the communications. Fast handoffs are a crucial requirement for vehicular networks to avoid long disruption times, since the high speed of vehicular nodes involves suffering a lot of handoffs during an Internet connection. This thesis is focused on Vehicular-to-Infrastructure (V2I) real-time infotainment services. The main contributions of this thesis are: i) a new testing framework for V2I communications to be able to test infotainment services in an easy way; ii) the analysis of the deployability of infotainment video services in vehicular networks using mobility protocols; and iii) the development of a new TCP architecture that will provide a better performance for all TCP-based infotainment services in a vehicular scenario with handoffs. In this thesis, firstly, we propose a new testing framework for vehicular infotainment applications. This framework is a vehicular emulation platform that allows testing real applications installed on Linux virtual machines. Using emulation, we are able to evaluate the performance of real applications with real-time requirements, so we can test multimedia applications used to offer infotainment services in vehicular scenarios in a straightforward way. Secondly, using the testing framework implemented in the first part of the thesis, we have done a performance evaluation of an infotainment service. Among these services, we think that video on demand services on highways will be interesting for users, and generate revenue to network operators. So we evaluated how network-layer handoffs can limit the deployment of a video streaming service. According to the results obtained, driving at high speeds will be an issue for a correct playback of video content, even using fast handoffs techniques. Finally, we developed a new TCP architecture to enhance performance during handoffs. Most of the non-safety services on ITS rely on the Transport Control Protocol (TCP), one of the core protocols of the Internet Protocol Suite. However there exists several issues related to TCP and mobility that can affect to TCP performance, and these issues are particularly important in vehicular networks due to its high mobility. Using new IEEE 802.21 MIH services, we propose a new TCP architecture that is able to anticipate handoffs, permitting to resume the communication after a handoff, avoiding long delays caused by TCP issues and adapting the TCP parameters to the new characteristics of the network. Using the architecture proposed, the performance of TCP is enhanced, getting a higher overall throughput and avoiding TCP fairness issues between users.Els Sistemes de Transport Intel·ligents (ITS) han impulsat les comunicacions vehiculars en l'actualitat. Les comunicacions vehiculars és un camp d'investigació de moda, i està atraient un gran interès en la indústria automobilística i de les telecomunicacions. En el camp de les comunicacions vehiculars, hi ha principalment dues línies de treball: (1) serveis de comunicacions relacionats amb la seguretat viària i la informació del trànsit; i (2) serveis d'informació i entreteniment, també anomenats serveis d'infotainment. Aquests últims inclouen tant serveis multimèdia (veu sobre IP, streaming, jocs on-line, etc.), com serveis clàssics de dades (correu electrònic, accés a xarxes privades, navegació web, compartir arxius, etc.). En aquesta tesi ens centrarem en aquests serveis d'infotainment ja que és necessari aprofundir en la investigació per aquests tipus de serveis, ja que, fins avui, els esforços de la comunitat científica en el camp de les comunicacions vehiculars s'ha centrat en els serveis relacionats amb la seguretat viària i la informació del trànsit. Els nodes vehiculars necessiten tenir connexió a Internet per a poder tenir accés als serveis d'infotainment. Mentre els vehicles estan en moviment a través de la xarxa viària, els vehicles han d'anar canviant el punt de connexió sense fils amb la xarxa. Durant aquest procés de canvi de punt de connexió, anomenat handoff, es perd la connectivitat fins que el vehicle es reconnecta a un altre punt de connexió viària prop de la seva àrea. Aquesta desconnexió causa interrupcions en les comunicacions. Uns handoffs ràpids són bàsics a les xarxes vehiculars per a evitar llargs períodes d'interrupció durant les comunicacions, ja que la gran velocitat a la que es mouen els nodes vehiculars significa un gran nombre de handoffs durant una connexió a Internet. Aquesta tesi es centra en serveis d'infotaiment en temps real per a comunicacions Vehicle-a-Infraestructura (V2I). Les principals contribucions d'aquesta tesi son: i) un nou marc de proves per a les comunicacions (V2I) per a poder provar serveis d'infotainment d'una manera fàcil; ii) l'anàlisi de la viabilitat del desplegament de serveis d'infotainment de vídeo en xarxes vehiculars utilitzant protocols de mobilitat IP; i iii) el desenvolupament d'una nova arquitectura TCP que proporciona un millor funcionament per a tots aquells serveis d'infotainment basats en el protocol TCP en un escenari vehicular amb handoffs. En aquesta tesi, primer proposem un nou marc de proves per a aplicacions vehiculars d'infotainment. Aquest marc és una plataforma d'emulació vehicular que permet provar aplicacions reals instal·lades en màquines virtuals Linux. Utilitzant l'emulació, som capaços d'avaluar el rendiment d'aplicacions reals amb característiques de temps real. D'aquesta manera es poden avaluar aplicacions multimèdia utilitzades per oferir serveis d'infotainment d'una forma senzilla en escenaris vehiculars. Segon, utilitzant el marc de prova implementat en la primera part de la tesi, hem avaluat el rendiment d'un servei d'infotainment. Entre aquest tipus de servei, creem que els serveis de vídeo sota demanda en autopistes/autovies serà interessant pels usuaris i generarà beneficis per als operadors de la xarxa. Per tant, hem avaluat com els handoffs a nivell de la capa de xarxa poden limitar el desplegament d'un servei de streaming de vídeo sota demanda. D'acord amb els resultats obtinguts, conduir a grans velocitats podria ser un problema per a poder reproduir un vídeo correctament, tot i utilitzar tècniques de handoffs ràpids. Finalment, hem desenvolupat una nova arquitectura TCP per a millorar el rendiment del protocol durant els handoffs. La majoria dels serveis d'infotainment utilitzen el Protocol de Control de Transport (TCP), un dels principals protocols de la pila de protocols d'Internet. Però existeixen forces problemes relacionats amb l'ús de TCP i la mobilitat que n'afecta el rendiment, i aquests problemes són particular