3,839 research outputs found
Distributed Object Tracking Using a Cluster-Based Kalman Filter in Wireless Camera Networks
Local data aggregation is an effective means to save sensor node energy and prolong the lifespan of wireless sensor networks. However, when a sensor network is used to track moving objects, the task of local data aggregation in the network presents a new set of challenges, such as the necessity to estimate, usually in real time, the constantly changing state of the target based on information acquired by the nodes at different time instants. To address these issues, we propose a distributed object tracking system which employs a cluster-based Kalman filter in a network of wireless cameras. When a target is detected, cameras that can observe the same target interact with one another to form a cluster and elect a cluster head. Local measurements of the target acquired by members of the cluster are sent to the cluster head, which then estimates the target position via Kalman filtering and periodically transmits this information to a base station. The underlying clustering protocol allows the current state and uncertainty of the target position to be easily handed off among clusters as the object is being tracked. This allows Kalman filter-based object tracking to be carried out in a distributed manner. An extended Kalman filter is necessary since measurements acquired by the cameras are related to the actual position of the target by nonlinear transformations. In addition, in order to take into consideration the time uncertainty in the measurements acquired by the different cameras, it is necessary to introduce nonlinearity in the system dynamics. Our object tracking protocol requires the transmission of significantly fewer messages than a centralized tracker that naively transmits all of the local measurements to the base station. It is also more accurate than a decentralized tracker that employs linear interpolation for local data aggregation. Besides, the protocol is able to perform real-time estimation because our implementation takes into consideration the sparsit- - y of the matrices involved in the problem. The experimental results show that our distributed object tracking protocol is able to achieve tracking accuracy comparable to the centralized tracking method, while requiring a significantly smaller number of message transmissions in the network
Robotic Wireless Sensor Networks
In this chapter, we present a literature survey of an emerging, cutting-edge,
and multi-disciplinary field of research at the intersection of Robotics and
Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor
Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system
that aims to achieve certain sensing goals while meeting and maintaining
certain communication performance requirements, through cooperative control,
learning and adaptation. While both of the component areas, i.e., Robotics and
WSN, are very well-known and well-explored, there exist a whole set of new
opportunities and research directions at the intersection of these two fields
which are relatively or even completely unexplored. One such example would be
the use of a set of robotic routers to set up a temporary communication path
between a sender and a receiver that uses the controlled mobility to the
advantage of packet routing. We find that there exist only a limited number of
articles to be directly categorized as RWSN related works whereas there exist a
range of articles in the robotics and the WSN literature that are also relevant
to this new field of research. To connect the dots, we first identify the core
problems and research trends related to RWSN such as connectivity,
localization, routing, and robust flow of information. Next, we classify the
existing research on RWSN as well as the relevant state-of-the-arts from
robotics and WSN community according to the problems and trends identified in
the first step. Lastly, we analyze what is missing in the existing literature,
and identify topics that require more research attention in the future
Recommended from our members
Wireless sensor monitoring of Paddington Station Box Corner
This paper presents the real performance of three diaphragm wall panels on the southeast corner of Paddington Station Box during excavation, monitored using a wireless sensor network. In total, 15 LPDT displacement sensors, 12 tilt sensors, 13 relay nodes and a gateway were deployed at three different stages. Each wireless sensor node is programmed with Contiki OS using the in-built IPv6-based network layer (6LoWPAN/RPL) for link-local addressing and routing, and ContikiMAC at the medium access control (MAC) layer for radio duty cycling. Extensive testing and calibration was carried out in the laboratory to ensure that the system functioned as expected. Wireless tilt and displacement sensors were installed to measure the inclination, angular distortion and relative displacement of these corner panels at three different depths. The monitoring data reveal that the corner produced a stiffening effect on the station box, which might result in a breakdown of plane strain conditions. The network performance characteristics (e.g. message reception ratio and network topology status) and challenges are also highlighted and discussed
Autonomous Vehicle Coordination with Wireless Sensor and Actuator Networks
A coordinated team of mobile wireless sensor and actuator nodes can bring numerous benefits for various applications in the field of cooperative surveillance, mapping unknown areas, disaster management, automated highway and space exploration. This article explores the idea of mobile nodes using vehicles on wheels, augmented with wireless, sensing, and control capabilities. One of the vehicles acts as a leader, being remotely driven by the user, the others represent the followers. Each vehicle has a low-power wireless sensor node attached, featuring a 3D accelerometer and a magnetic compass. Speed and orientation are computed in real time using inertial navigation techniques. The leader periodically transmits these measures to the followers, which implement a lightweight fuzzy logic controller for imitating the leader's movement pattern. We report in detail on all development phases, covering design, simulation, controller tuning, inertial sensor evaluation, calibration, scheduling, fixed-point computation, debugging, benchmarking, field experiments, and lessons learned
Distributed Maximum Likelihood for Simultaneous Self-localization and Tracking in Sensor Networks
We show that the sensor self-localization problem can be cast as a static
parameter estimation problem for Hidden Markov Models and we implement fully
decentralized versions of the Recursive Maximum Likelihood and on-line
Expectation-Maximization algorithms to localize the sensor network
simultaneously with target tracking. For linear Gaussian models, our algorithms
can be implemented exactly using a distributed version of the Kalman filter and
a novel message passing algorithm. The latter allows each node to compute the
local derivatives of the likelihood or the sufficient statistics needed for
Expectation-Maximization. In the non-linear case, a solution based on local
linearization in the spirit of the Extended Kalman Filter is proposed. In
numerical examples we demonstrate that the developed algorithms are able to
learn the localization parameters.Comment: shorter version is about to appear in IEEE Transactions of Signal
Processing; 22 pages, 15 figure
In-Network Distributed Solar Current Prediction
Long-term sensor network deployments demand careful power management. While
managing power requires understanding the amount of energy harvestable from the
local environment, current solar prediction methods rely only on recent local
history, which makes them susceptible to high variability. In this paper, we
present a model and algorithms for distributed solar current prediction, based
on multiple linear regression to predict future solar current based on local,
in-situ climatic and solar measurements. These algorithms leverage spatial
information from neighbors and adapt to the changing local conditions not
captured by global climatic information. We implement these algorithms on our
Fleck platform and run a 7-week-long experiment validating our work. In
analyzing our results from this experiment, we determined that computing our
model requires an increased energy expenditure of 4.5mJ over simpler models (on
the order of 10^{-7}% of the harvested energy) to gain a prediction improvement
of 39.7%.Comment: 28 pages, accepted at TOSN and awaiting publicatio
- …