44 research outputs found

    Non-MPM Mode Coding for Intra Prediction in Video Coding

    Get PDF
    The High Efficiency Video Coding standard introduced thirty-five intra prediction modes. It employed a method based on three most probable modes (MPM) to improve intra mode coding. This method significantly improved the performance by extracting three MPMs out of the thirty-five intra modes. The Joint Video Exploration Team (JVET) defines sixty-seven intra prediction modes for a possible future video coding standard. In the latest JVET development, six MPMs are chosen, and the remaining sixty-one modes are divided into sixteen “selected” and forty-five “non-selected” modes. These non-MPM modes are coded using fixed length coding. This research focusses on finding more efficient ways to code these intra prediction modes, including MPM modes and non-MPM modes. A method is proposed to select and order the sixty-one non-MPM modes based on probability statistics. The modes that fall into selected category are coded using shorter codes and non-selected modes are coded using larger codes, which is in line with the principle of entropy coding. Experimental results prove performance improvement when compared to JEM7.0 software as a reference

    A comprehensive video codec comparison

    Get PDF
    In this paper, we compare the video codecs AV1 (version 1.0.0-2242 from August 2019), HEVC (HM and x265), AVC (x264), the exploration software JEM which is based on HEVC, and the VVC (successor of HEVC) test model VTM (version 4.0 from February 2019) under two fair and balanced configurations: All Intra for the assessment of intra coding and Maximum Coding Efficiency with all codecs being tuned for their best coding efficiency settings. VTM achieves the highest coding efficiency in both configurations, followed by JEM and AV1. The worst coding efficiency is achieved by x264 and x265, even in the placebo preset for highest coding efficiency. AV1 gained a lot in terms of coding efficiency compared to previous versions and now outperforms HM by 24% BD-Rate gains. VTM gains 5% over AV1 in terms of BD-Rates. By reporting separate numbers for JVET and AOM test sequences, it is ensured that no bias in the test sequences exists. When comparing only intra coding tools, it is observed that the complexity increases exponentially for linearly increasing coding efficiency

    Challenges and solutions in H.265/HEVC for integrating consumer electronics in professional video systems

    Get PDF

    Algorithms and Hardware Co-Design of HEVC Intra Encoders

    Get PDF
    Digital video is becoming extremely important nowadays and its importance has greatly increased in the last two decades. Due to the rapid development of information and communication technologies, the demand for Ultra-High Definition (UHD) video applications is becoming stronger. However, the most prevalent video compression standard H.264/AVC released in 2003 is inefficient when it comes to UHD videos. The increasing desire for superior compression efficiency to H.264/AVC leads to the standardization of High Efficiency Video Coding (HEVC). Compared with the H.264/AVC standard, HEVC offers a double compression ratio at the same level of video quality or substantial improvement of video quality at the same video bitrate. Yet, HE-VC/H.265 possesses superior compression efficiency, its complexity is several times more than H.264/AVC, impeding its high throughput implementation. Currently, most of the researchers have focused merely on algorithm level adaptations of HEVC/H.265 standard to reduce computational intensity without considering the hardware feasibility. What’s more, the exploration of efficient hardware architecture design is not exhaustive. Only a few research works have been conducted to explore efficient hardware architectures of HEVC/H.265 standard. In this dissertation, we investigate efficient algorithm adaptations and hardware architecture design of HEVC intra encoders. We also explore the deep learning approach in mode prediction. From the algorithm point of view, we propose three efficient hardware-oriented algorithm adaptations, including mode reduction, fast coding unit (CU) cost estimation, and group-based CABAC (context-adaptive binary arithmetic coding) rate estimation. Mode reduction aims to reduce mode candidates of each prediction unit (PU) in the rate-distortion optimization (RDO) process, which is both computation-intensive and time-consuming. Fast CU cost estimation is applied to reduce the complexity in rate-distortion (RD) calculation of each CU. Group-based CABAC rate estimation is proposed to parallelize syntax elements processing to greatly improve rate estimation throughput. From the hardware design perspective, a fully parallel hardware architecture of HEVC intra encoder is developed to sustain UHD video compression at 4K@30fps. The fully parallel architecture introduces four prediction engines (PE) and each PE performs the full cycle of mode prediction, transform, quantization, inverse quantization, inverse transform, reconstruction, rate-distortion estimation independently. PU blocks with different PU sizes will be processed by the different prediction engines (PE) simultaneously. Also, an efficient hardware implementation of a group-based CABAC rate estimator is incorporated into the proposed HEVC intra encoder for accurate and high-throughput rate estimation. To take advantage of the deep learning approach, we also propose a fully connected layer based neural network (FCLNN) mode preselection scheme to reduce the number of RDO modes of luma prediction blocks. All angular prediction modes are classified into 7 prediction groups. Each group contains 3-5 prediction modes that exhibit a similar prediction angle. A rough angle detection algorithm is designed to determine the prediction direction of the current block, then a small scale FCLNN is exploited to refine the mode prediction

    On the Effectiveness of Video Recolouring as an Uplink-model Video Coding Technique

    Get PDF
    For decades, conventional video compression formats have advanced via incremental improvements with each subsequent standard achieving better rate-distortion (RD) efficiency at the cost of increased encoder complexity compared to its predecessors. Design efforts have been driven by common multi-media use cases such as video-on-demand, teleconferencing, and video streaming, where the most important requirements are low bandwidth and low video playback latency. Meeting these requirements involves the use of computa- tionally expensive block-matching algorithms which produce excellent compression rates and quick decoding times. However, emerging use cases such as Wireless Video Sensor Networks, remote surveillance, and mobile video present new technical challenges in video compression. In these scenarios, the video capture and encoding devices are often power-constrained and have limited computational resources available, while the decoder devices have abundant resources and access to a dedicated power source. To address these use cases, codecs must be power-aware and offer a reasonable trade-off between video quality, bitrate, and encoder complexity. Balancing these constraints requires a complete rethinking of video compression technology. The uplink video-coding model represents a new paradigm to address these low-power use cases, providing the ability to redistribute computational complexity by offloading the motion estimation and compensation steps from encoder to decoder. Distributed Video Coding (DVC) follows this uplink model of video codec design, and maintains high quality video reconstruction through innovative channel coding techniques. The field of DVC is still early in its development, with many open problems waiting to be solved, and no defined video compression or distribution standards. Due to the experimental nature of the field, most DVC codec to date have focused on encoding and decoding the Luma plane only, which produce grayscale reconstructed videos. In this thesis, a technique called “video recolouring” is examined as an alternative to DVC. Video recolour- ing exploits the temporal redundancies between colour planes, reducing video bitrate by removing Chroma information from specific frames and then recolouring them at the decoder. A novel video recolouring algorithm called Motion-Compensated Recolouring (MCR) is proposed, which uses block motion estimation and bi-directional weighted motion-compensation to reconstruct Chroma planes at the decoder. MCR is used to enhance a conventional base-layer codec, and shown to reduce bitrate by up to 16% with only a slight decrease in objective quality. MCR also outperforms other video recolouring algorithms in terms of objective video quality, demonstrating up to 2 dB PSNR improvement in some cases

    Análise do HEVC escalável : desempenho e controlo de débito

    Get PDF
    Mestrado em Engenharia Eletrónica e TelecomunicaçõesEsta dissertação apresenta um estudo da norma de codificação de vídeo de alta eficiência (HEVC) e a sua extensão para vídeo escalável, SHVC. A norma de vídeo SHVC proporciona um melhor desempenho quando codifica várias camadas em simultâneo do que quando se usa o codificador HEVC numa configuração simulcast. Ambos os codificadores de referência, tanto para a camada base como para a camada superior usam o mesmo modelo de controlo de débito, modelo R-λ, que foi otimizado para o HEVC. Nenhuma otimização de alocação de débito entre camadas foi até ao momento proposto para o modelo de testes (SHM 8) para a escalabilidade do HEVC (SHVC). Derivamos um novo modelo R-λ apropriado para a camada superior e para o caso de escalabilidade espacial, que conduziu a um ganho de BD-débito de 1,81% e de BD-PSNR de 0,025 em relação ao modelo de débito-distorção existente no SHM do SHVC. Todavia, mostrou-se também nesta dissertação que o proposto modelo de R-λ não deve ser usado na camada inferior (camada base) no SHVC e por conseguinte no HEVC.This dissertation provides a study of the High Efficiency Video Coding standard (HEVC) and its scalable extension, SHVC. The SHVC provides a better performance when encoding several layers simultaneously than using an HEVC encoder in a simulcast configuration. Both reference encoders, in the base layer and in the enhancement layer use the same rate control model, R-λ model, which was optimized for HEVC. No optimal bitrate partitioning amongst layers is proposed in scalable HEVC (SHVC) test model (SHM 8). We derived a new R-λ model for the enhancement layer and for the spatial case which led to a DB-rate gain of 1.81% and DB-PSNR gain of 0.025 in relation to the rate-distortion model of SHM-SHVC. Nevertheless, we also show in this dissertation that the proposed model of R-λ should not be used neither in the base layer nor in HEVC

    Error resilience and concealment techniques for high-efficiency video coding

    Get PDF
    This thesis investigates the problem of robust coding and error concealment in High Efficiency Video Coding (HEVC). After a review of the current state of the art, a simulation study about error robustness, revealed that the HEVC has weak protection against network losses with significant impact on video quality degradation. Based on this evidence, the first contribution of this work is a new method to reduce the temporal dependencies between motion vectors, by improving the decoded video quality without compromising the compression efficiency. The second contribution of this thesis is a two-stage approach for reducing the mismatch of temporal predictions in case of video streams received with errors or lost data. At the encoding stage, the reference pictures are dynamically distributed based on a constrained Lagrangian rate-distortion optimization to reduce the number of predictions from a single reference. At the streaming stage, a prioritization algorithm, based on spatial dependencies, selects a reduced set of motion vectors to be transmitted, as side information, to reduce mismatched motion predictions at the decoder. The problem of error concealment-aware video coding is also investigated to enhance the overall error robustness. A new approach based on scalable coding and optimally error concealment selection is proposed, where the optimal error concealment modes are found by simulating transmission losses, followed by a saliency-weighted optimisation. Moreover, recovery residual information is encoded using a rate-controlled enhancement layer. Both are transmitted to the decoder to be used in case of data loss. Finally, an adaptive error resilience scheme is proposed to dynamically predict the video stream that achieves the highest decoded quality for a particular loss case. A neural network selects among the various video streams, encoded with different levels of compression efficiency and error protection, based on information from the video signal, the coded stream and the transmission network. Overall, the new robust video coding methods investigated in this thesis yield consistent quality gains in comparison with other existing methods and also the ones implemented in the HEVC reference software. Furthermore, the trade-off between coding efficiency and error robustness is also better in the proposed methods

    Rinnakkainen toteutus H.265 videokoodaus standardille

    Get PDF
    The objective of this study was to research the scalability of the parallel features in the new H.265 video compression standard, also know as High Efficiency Video Coding (HEVC). Compared to its predecessor, the H.264 standard, H.265 typically achieves around 50% bitrate reduction for the same subjective video quality. Especially videos with higher resolution (Full HD and beyond) achieve better compression ratios. Also a better utilization of parallel computing resources is provided. H.265 introduces two novel parallelization features: Tiles and Wavefront Parallel Processing (WPP). In Tiles, each video frame is divided into areas that can be decoded without referencing to other areas in the same frame. In WPP, the relations between code blocks in a frame are encoded so that the decoding process can progress through the frame as a front using multiple threads. In this study, the reference implementation for the H.265 decoder was augmented to support both of these parallelization features. The performance of the parallel implementations was measured using three different setups. From the measurement results it could be seen that the introduction of more CPU cores reduced the total decode time of the video frames to a certain point. When using the Tiles feature, it was observed that the encoding geometry, i.e. how each frame was divided into individually decodable areas, had a noticeable effect on the decode times with certain thread counts. When using WPP, it was observed that what was mostly synchronization overhead, sometimes had a negative effect on the decode times when using larger (4-12) amounts of threads.Tämän tutkimuksen aiheena oli tutkia uuden H.265 videonpakkausstandardin (tunnetaan myös nimellä HEVC (engl. High Efficiency Video Coding)) rinnakkaisuusominaisuuksien skaalautuvuutta. Verrattuna edeltäjäänsä, H.264 videonpakkaustandardiin, H.265 tyypillisesti saavuttaa samalla kuvanlaadulla noin 50% pienemmän pakkauskoon. Erityisesti suuren resoluution videoilla (Full HD ja suuremmat) pakkaustehokkuuden paremmuus korostuu. Huomiota on kiinnitetty myös moniydinprosessoreiden hyödyntämiseen videokoodauksessa. H.265 tarjoaa kaksi uutta rinnakkaisuusominaisuutta: niin kutsutut Tiles- ja WPP-menetelmät (engl. \emph{Wavefront Parallel Processing}). Tiles-menetelmässä jokainen videon kuva jaetaan alueisiin, jotka voidaan purkaa viittaamatta saman kuvan muihin alueisiin. WPP-menetelmässä suhteet kuvan lohkoihin pakataan siten että purkamisprosessi pystyy etenemään kuvan läpi rintamana hyödyntäen useampia säikeitä. Tässä tutkimuksessa H.265 videodekooderin referenssitoteutusta laajennettiin tukemaan molempia näistä rinnakkaisuusominaisuuksista. Suorituskykyä mitattiin käyttäen kolmea eri mittausasetelmaa. Mittaustuloksista ilmeni, että prosessoriydinten lukumäärän kasvattaminen nopeutti videoiden purkamista tiettyyn pisteeseen asti. Tiles-menetelmää mitatessa havaittiin, että alueiden geometrialla, eli kuinka kuva jaettiin riippumattomiin alueisiin, on huomattava vaikutus purkamisnopeuteen tietyillä säiemäärillä. WPP-menetelmää mitattaessa havaittiin että korkeampiin säiemääriin (4-12) siirryttäessä purkamisnopeus alkoi hidastua. Tämä johtui pääasiassa säikeiden keskinäiseen synkronointiin kuluvasta ajasta

    Towards visualization and searching :a dual-purpose video coding approach

    Get PDF
    In modern video applications, the role of the decoded video is much more than filling a screen for visualization. To offer powerful video-enabled applications, it is increasingly critical not only to visualize the decoded video but also to provide efficient searching capabilities for similar content. Video surveillance and personal communication applications are critical examples of these dual visualization and searching requirements. However, current video coding solutions are strongly biased towards the visualization needs. In this context, the goal of this work is to propose a dual-purpose video coding solution targeting both visualization and searching needs by adopting a hybrid coding framework where the usual pixel-based coding approach is combined with a novel feature-based coding approach. In this novel dual-purpose video coding solution, some frames are coded using a set of keypoint matches, which not only allow decoding for visualization, but also provide the decoder valuable feature-related information, extracted at the encoder from the original frames, instrumental for efficient searching. The proposed solution is based on a flexible joint Lagrangian optimization framework where pixel-based and feature-based processing are combined to find the most appropriate trade-off between the visualization and searching performances. Extensive experimental results for the assessment of the proposed dual-purpose video coding solution under meaningful test conditions are presented. The results show the flexibility of the proposed coding solution to achieve different optimization trade-offs, notably competitive performance regarding the state-of-the-art HEVC standard both in terms of visualization and searching performance.Em modernas aplicações de vídeo, o papel do vídeo decodificado é muito mais que simplesmente preencher uma tela para visualização. Para oferecer aplicações mais poderosas por meio de sinais de vídeo,é cada vez mais crítico não apenas considerar a qualidade do conteúdo objetivando sua visualização, mas também possibilitar meios de realizar busca por conteúdos semelhantes. Requisitos de visualização e de busca são considerados, por exemplo, em modernas aplicações de vídeo vigilância e comunicações pessoais. No entanto, as atuais soluções de codificação de vídeo são fortemente voltadas aos requisitos de visualização. Nesse contexto, o objetivo deste trabalho é propor uma solução de codificação de vídeo de propósito duplo, objetivando tanto requisitos de visualização quanto de busca. Para isso, é proposto um arcabouço de codificação em que a abordagem usual de codificação de pixels é combinada com uma nova abordagem de codificação baseada em features visuais. Nessa solução, alguns quadros são codificados usando um conjunto de pares de keypoints casados, possibilitando não apenas visualização, mas também provendo ao decodificador valiosas informações de features visuais, extraídas no codificador a partir do conteúdo original, que são instrumentais em aplicações de busca. A solução proposta emprega um esquema flexível de otimização Lagrangiana onde o processamento baseado em pixel é combinado com o processamento baseado em features visuais objetivando encontrar um compromisso adequado entre os desempenhos de visualização e de busca. Os resultados experimentais mostram a flexibilidade da solução proposta em alcançar diferentes compromissos de otimização, nomeadamente desempenho competitivo em relação ao padrão HEVC tanto em termos de visualização quanto de busca
    corecore