2009 Index IEEE Antennas and Wireless Propagation Letters Vol. 8

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

2008 Index IEEE Transactions on Control Systems Technology Vol. 16

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

Design and Performance Analysis of Rectangular Microstrip Patch Antennas Using Different Feeding Techniques for 5G Applications

In this article, the design and performance of a novel rectangular microstrip patch antenna (RMPA) utilizing the dielectric substrate material FR4 of relative permittivity (Ԑr = 4.3) and thickness (h = 0.254 mm) is proposed to operate at (fr = 28 GHz). Three different feeding techniques (microstrip inset line, coaxial probe, and proximity coupled line) are investigated to improve the antenna radiation performance especially the antenna gain and bandwidth using Computer Simulation Technology (CST) and High Frequency Structure Simulator (HFSS). The simulated frequency responses generally reveal that the proximity-coupled fed provides extremely directive pattern and maintain higher radiation performance regardless of its antenna size which is larger than the other considered feeding ones. With the presence of the three feeding techniques, the gain is improved from 5.50 dB to 6.83 dB additionally, the antenna bandwidth is improved from 0.6 GHz to 3.60 GHz at fr = 28 GHz when the reflection coefficient S11= -10 dB. Compared to the previously designed RMPA, the proposed design has the advantages of reliable size, larger bandwidth and higher gain, which make it more suitable for many 5G application systems

Implantable antennas for bio-medical applications

Biomedical telemetry has gained a lot of attention with the development in the healthcare industry. This technology has made it feasible to monitor the physiological signs of patient remotely without traditional hospital appointments and follow up routine check-ups. Implantable Medical Devices(IMDs) play an important role to monitor the patients through wireless telemetry. IMDs consist of nodes and implantable sensors in which antenna is a major component. The implantable sensors suffer a lot of limitations. Various factors need to be considered for the implantable sensors such as miniaturization, patient safety, bio-compatibility, low power consumption, lower frequency band of operation and dual-band operation to have a robust and continuous operation. The selection of the antenna is a challenging task in implantable sensor design as it dictates performance of the whole implant. In this paper a critical review on implantable antennas for biomedical applications is presented

Circularly polarized and reconfigurable frequency selective surface based transmit array antenna for x-band applications

Transmitarray (TA) antennas have attracted much attention in recent years due to their number of applications. These include the 5G/6G mobile networks and satellite communication systems for the microwave frequency range. The various satellite applications require high-gain antennas with polarization agility. Also, the state-ofthe- art smart communication systems require reconfigurable antennas allowing the frequency and beam switching according to the application requirements. In this research, three different TA antennas have been studied and designed for X-band applications which are high gain and wideband TA antenna, circularly polarized TA antenna, frequency and beam reconfigurable TA antenna. For the first design, two Frequency-Selective Surface (FSS) unit cells which include Double Square Ring with Center Patch (DSR-CP) and Split Ring Resonator (SRR), have been applied to increase the antenna gain and bandwidth. The optimized unit cell structure shows that a fourlayer configuration could provide maximum phase range with low insertion losses. The complete DSR-CP TA consisting of 121 elements has produced an impedance bandwidth of 33.3% with a peak gain value of 20.4 dBi and 1-dB gain for bandwidth of 10%. SRR-based TA achieved the impedance bandwidth of 35% with a peak gain value of 21.9 dBi and 11.6% 1-dB gain bandwidth. A circularly polarized TA using a Meander Line Polarizer (MLP) superstrate has been studied and presented. The MLP unit cell was simulated and optimized at 12 GHz, having 900 phase difference between the two orthogonal E-field components, Ex and Ey. The final prototype measurement results show that a low axial ratio of 1.89 and 20.17 dBi gain at 11.2 GHz has been obtained. Finally, the last part of the research focused on the frequency and beam reconfigurable TA antenna. A U-shape superstrate layer has been added to introduce frequency selectivity in front of the horn antenna that acts as a bandpass filter. Then, by varying the strip length of the U-shape unit cell, the antenna frequency can be reconfigured from 8.5 GHz to 11.2 GHz. On the other hand, a new active TA unit cell equipped with four switchable strips using Positive Intrinsic Negative (PIN) diodes has been employed to achieve beam reconfigurable TA antenna. Thus, the antenna beam can be tilted by controlling the PIN diodes ON and OFF switching states. Results show that a full-beam switching range of 43.20 has been obtained. In conclusion, this research has successfully presented three new TA antenna designs, which are highly potential for the X-band applications

Millimeter-Wave Components and Antennas for Spatial and Polarization Diversity using PRGW Technology

The evolution of the wireless communication systems to the future generation is accompanied by a huge improvement in the system performance through providing a high data rate with low latency. These systems require access to millimeter wave (mmWave) bands, which offer several advantages such as physically smaller components and much wider bandwidthcomparedtomicrowavefrequencies. However, mmWavecomponentsstillneed a significant improvement to follow the rapid variations in future technologies. Although mmWave frequencies can carry more data, they are limited in terms of their penetration capabilities and their coverage range. Moreover, these frequencies avoid deploying traditional guiding technologies such as microstrip lines due to high radiation and material losses. Hence, utilizing new guiding structure techniques such as Printed Ridge Gap Waveguide (PRGW) is essential in future mmWave systems implementation. ThemainpurposeofthisthesisistodesignmmWavecomponents,antennasubsystems and utilize both in beam switching systems. The major mmWave components addressed in this thesis are hybrid coupler, crossover, and differential power divider where the host guidingstructureisthePRGW.Inaddition,variousdesignsfordifferentialfeedingPRGW antennas and antenna arrays are presented featuring wide bandwidth and high gain in mmWave band. Moreover, the integration of both the proposed components and the featured antennas is introduced. This can be considered as a significant step toward the requirements fulfillment of today's advanced communication systems enabling both space and polarization diversity. The proposed components are designed to meet the future ever-increasing consumer experience and technical requirements such as low loss, compact size, and low-cost fabrication. This directed the presented research to have a contribution into three major parts. The first part highlights the feeding structures, where mmWave PRGW directional couplers and differential feeding power divider are designed and validated. These components are among the most important passive elements of microwave circuits used in antennabeam-switchingnetworks. Different3-dBquadraturehybridcouplersandcrossover prototypes are proposed, featured with a compact size and a wide bandwidth beyond 10 % at 30 GHz. In the second part, a beam switching network implemented using hybrid couplers is presented. The proposed beam switching network is a 4 × 4 PRGW Butler matrix that used to feed a Magneto-electric (ME) dipole antenna array. As a result, a 2-D scanning antenna array with a compact size, wide bandwidth, and high radiation efficiency larger than84%isachieved. Furthergainenhancementof5dBiisachievedthroughdeployinga hybridgainenhancementtechniqueincludingAMCmushroomshapesaroundtheantenna array with a dielectric superstrate located in the broadside direction. The proposed scanning antenna array can be considered as a step toward the desired improvement in the data rate and coverage through enabling the space diversity for the communication link. The final activity is related to the development of high-gain wide-band mmWave antenna arrays for potential use in future mmWave applications. The first proposed configuration is a differential feeding circular polarized aperture antenna array implemented with PRGW technology. Differential feeding antenna designs offer more advantages than single- ended antennas for mmWave communications as they are easy to be integrated with differential mmWave monolithic ICs that have high common-mode rejection ratio providing an immunity of the environmental noise. The proposed differential feeding antenna array is designed and fabricated, which featured with a stable high gain and a high radiation efficiency over a wide bandwidth. Another proposed configuration is a dualpolarized ME-dipole PRGW antenna array for mmWave wireless communication. Dual polarizationisconsideredoneofthemostimportantantennasolutionsthatcansavecosts and space for modern communication systems. In addition, it is an effective strategy for multiple-input and multiple-output systems that can reduce the size of multiple antennas systems by utilizing extra orthogonal polarization. The proposed dual- polarized antenna array is designed to achieve a stable gain of 15 ± 1 dBi with low cross- polarization less than -30 dB over a wide frequency range of 20 % at 30 GHz

Antennas and Propagation

This Special Issue gathers topics of utmost interest in the field of antennas and propagation, such as: new directions and challenges in antenna design and propagation; innovative antenna technologies for space applications; metamaterial, metasurface and other periodic structures; antennas for 5G; electromagnetic field measurements and remote sensing applications

Analysis of Tripleband Single Layer Proximity Fed 2x2 Microstrip Patch Array Antenna

Microstrip patch antennas that are multiband and downsized are required to suit the high demand of modern wireless applications. To meet this need, a one-of-a-kind triple band array antenna has been proposed. The proposed 2x2 microstrip patch array, which comprises of four hexagon-shaped radiating patches are electromagnetically excited by a centrally positioned microstrip feed line in the same plane along with a slotted ground plane, is investigated. CST Microwave Studio, a powerful 3D electromagnetic analysis programme, was used to design and optimize the array antennas. The 2x2 array antenna was constructed on a FR-4 substrate with a dielectric constant of 4.3, a loss tangent of 0.001, and a height of 1.6mm. To optimize energy coupling from the feed line to the radiating patches, the ground plane has an H-shaped groove cut into it. The suggested 2x2 array antenna\u27s multi- frequency behaviour is shown. Three resonant peaks were detected at 1.891GHz, 2.755GHz, and 3.052GHz. The observed bandwidths for these resonances are 234MHz, 69MHz, and 75MHz, respectively, with measured gains of 7.57dBi, 6.73dBi, and 5.76dBi. The goal of this work is to design, build, and test a single layer proximity fed array antenna. Standard proximity fed array antennas contain two substrate layers; however this array antenna has only one. As a consequence, the impedance matching and alignment are better. Simulated and experimental results showed that the this 2x2 array antenna operates in various important commercial bands, such as L and S bands and the array antenna might be beneficial for a wide range of wireless applications. The proposed antenna has good Impedance, S11, and radiation qualities at resonant frequencies. In this work, the 2x2 array antenna with hexagon-shaped radiating patches was successfully created utilizing the single layer proximity fed antenna concept and gap coupled parasitic patches

Applications of Antenna Technology in Sensors

During the past few decades, information technologies have been evolving at a tremendous rate, causing profound changes to our world and to our ways of living. Emerging applications have opened u[ new routes and set new trends for antenna sensors. With the advent of the Internet of Things (IoT), the adaptation of antenna technologies for sensor and sensing applications has become more important. Now, the antennas must be reconfigurable, flexible, low profile, and low-cost, for applications from airborne and vehicles, to machine-to-machine, IoT, 5G, etc. This reprint aims to introduce and treat a series of advanced and emerging topics in the field of antenna sensors