The design of an effective sensor fusion model for condition monitoring systems of turning processes

High energy price and the increasing requirements of quality and low cost of products have created an urgent need to implement new technologies in current automated manufacturing environments. Condition monitoring systems of manufacturing processes have been recognised in recent years as one of the essential technologies that provide the competitive advantage in many manufacturing environments. This research aims to develop an effective sensor fusion model for turning processes for the detection of tool wear. Multi-sensors combined with a novelty detection algorithm and Learning Vector Quantisation (LVQ) neural networks are used in this research to detect tool wear and provide diagnostic and prognostic information. A novel approach, termed ASPST, (Automated Sensor and Signal Processing Selection System for Turning) is used to select the most appropriate sensors and signal processing methods. The aim is to reduce the number of sensors needed in the overall system and reduce the cost. The ASPST approach is based on simplifying complex sensory signals into a group of Sensory Characteristic Features (SCFs) and evaluating the sensitivity of these SCFs in detecting tool wear. A wide range of sensory signals (cutting forces, strain, acceleration, acoustic emission and sound) and signal processing methods are also implemented to verify the capability of the approach. A cost reduction method is also implemented based on eliminating the least utilised sensor in an attempt to reduce the overall cost of the system without sacrificing the capability of the condition monitoring system. The experimental results prove that the suggested approach provides a responsive and effective solution in monitoring tool wear in turning with reduced time and cost

Rapid design of tool-wear condition monitoring systems for turning processes using novelty detection

Condition monitoring systems of manufacturing processes have been recognised in recent years as one of the key technologies that provide the competitive advantage in many manufacturing environments. It is capable of providing an essential means to reduce cost, increase productivity, improve quality and prevent damage to the machine or workpiece. Turning operations are considered one of the most common manufacturing processes in industry. It is used to manufacture different round objects such as shafts, spindles and pins. Despite recent development and intensive engineering research, the development of tool wear monitoring systems in turning is still ongoing challenge. In this paper, force signals are used for monitoring tool-wear in a feature fusion model. A novel approach for the design of condition monitoring systems for turning operations using novelty detection algorithm is presented. The results found prove that the developed system can be used for rapid design of condition monitoring systems for turning operations to predict tool-wear

Analytical and comparative study of using a CNC machine spindle motor power and infrared technology for the design of a cutting tool condition monitoring system

This paper outlines a comparative study to compare between using the power of the spindle and the infrared images of the cutting tool to design a condition monitoring system. This paper compares the two technologies for the development of a tool condition monitoring for milling processes. Wavelet analysis is used to process the power signal. Image gradient and Wavelet analyses are used to process the infrared images. The results show that the image gradient and wavelet analysis are powerful image processing techniques in detecting tool wear. The power of the motor of the spindle has shown less sensitivity to tool conditions in this case when compared to infrared thermography

A multi-sensor based online tool condition monitoring system for milling process

Tool condition monitoring has been considered as one of the key enabling technologies for manufacturing optimization. Due to the high cost and limited system openness, the relevant developed systems have not been widely adopted by industries, especially Small and Medium-sized Enterprises. In this research, a cost-effective, wireless communication enabled, multi-sensor based tool condition monitoring system has been developed. Various sensor data, such as vibration, cutting force and power data, as well as actual machining parameters, have been collected to support efficient tool condition monitoring and life estimation. The effectiveness of the developed system has been validated via machining cases. The system can be extended to wide manufacturing applications

Model-based observer proposal for surface roughness monitoring

Comunicación presentada a MESIC 2019 8th Manufacturing Engineering Society International Conference (Madrid, 19-21 de Junio de 2019)In the literature, many different machining monitoring systems for surface roughness and tool condition have been proposed and validated experimentally. However, these approaches commonly require costly equipment and experimentation. In this paper, we propose an alternative monitoring system for surface roughness based on a model-based observer considering simple relationships between tool wear, power consumption and surface roughness. The system estimates the surface roughness according to simple models and updates the estimation fusing the information from quality inspection and power consumption. This monitoring strategy is aligned with the industry 4.0 practices and promotes the fusion of data at different shop-floor levels

Diagnostics and prognostics utilising dynamic Bayesian networks applied to a wind turbine gearbox

The UK has the largest installed capacity of offshore wind and this is set to increase significantly in future years. The difficulty in conducting maintenance offshore leads to increased operation and maintenance costs compared to onshore but with better condition monitoring and preventative maintenance strategies these costs could be reduced. In this paper an on-line condition monitoring system is created that is capable of diagnosing machine component conditions based on an array of sensor readings. It then informs the operator of actions required. This simplifies the role of the operator and the actions required can be optimised within the program to minimise costs. The program has been applied to a gearbox oil testbed to demonstrate its operational suitability. In addition a method for determining the most cost effective maintenance strategy is examined. This method uses a Dynamic Bayesian Network to simulate the degradation of wind turbine components, effectively acting as a prognostics tool, and calculates the cost of various preventative maintenance strategies compared to purely corrective maintenance actions. These methods are shown to reduce the cost of operating wind turbines in the offshore environment

A comparative study of using spindle motor power and eddy current for the detection of tool conditions in milling processes

This paper investigates the use of the power of the driving motor of a CNC spindle in comparison to two perpendicular eddy current sensors for the detection of tool wear in milling processes. Monitoring the power through the current profile is a low cost system which has been utilised in this study as an attempt to detect the fluctuation in the motor load as a result of the conditions of the cutting tool. Eddy current sensors are dedicated sensors that are installed on the spindle to measure the vibration of the rotating spindle in two axes. Experimental work has been conducted using fresh and worn tools to investigate the effect of tool conditions on the two sensory systems. Time domain features are utilised to compare between the two sensors in relation to this application. The results indicate that Eddy current sensors are found to be more successful and sensitive, in general, than the power of the motor in detecting the changes of the cutting tools during the machining operation. However, the kurtosis value of the power of the spindle has been found to be successful in predicting the tool conditions with high sensitivity

Online Tool Condition Monitoring Based on Parsimonious Ensemble+

Accurate diagnosis of tool wear in metal turning process remains an open challenge for both scientists and industrial practitioners because of inhomogeneities in workpiece material, nonstationary machining settings to suit production requirements, and nonlinear relations between measured variables and tool wear. Common methodologies for tool condition monitoring still rely on batch approaches which cannot cope with a fast sampling rate of metal cutting process. Furthermore they require a retraining process to be completed from scratch when dealing with a new set of machining parameters. This paper presents an online tool condition monitoring approach based on Parsimonious Ensemble+, pENsemble+. The unique feature of pENsemble+ lies in its highly flexible principle where both ensemble structure and base-classifier structure can automatically grow and shrink on the fly based on the characteristics of data streams. Moreover, the online feature selection scenario is integrated to actively sample relevant input attributes. The paper presents advancement of a newly developed ensemble learning algorithm, pENsemble+, where online active learning scenario is incorporated to reduce operator labelling effort. The ensemble merging scenario is proposed which allows reduction of ensemble complexity while retaining its diversity. Experimental studies utilising real-world manufacturing data streams and comparisons with well known algorithms were carried out. Furthermore, the efficacy of pENsemble was examined using benchmark concept drift data streams. It has been found that pENsemble+ incurs low structural complexity and results in a significant reduction of operator labelling effort.Comment: this paper has been published by IEEE Transactions on Cybernetic

Cutting tool tracking and recognition based on infrared and visual imaging systems using principal component analysis (PCA) and discrete wavelet transform (DWT) combined with neural networks

The implementation of computerised condition monitoring systems for the detection cutting tools’ correct installation and fault diagnosis is of a high importance in modern manufacturing industries. The primary function of a condition monitoring system is to check the existence of the tool before starting any machining process and ensure its health during operation. The aim of this study is to assess the detection of the existence of the tool in the spindle and its health (i.e. normal or broken) using infrared and vision systems as a non-contact methodology. The application of Principal Component Analysis (PCA) and Discrete Wavelet Transform (DWT) combined with neural networks are investigated using both types of data in order to establish an effective and reliable novel software program for tool tracking and health recognition. Infrared and visual cameras are used to locate and track the cutting tool during the machining process using a suitable analysis and image processing algorithms. The capabilities of PCA and Discrete Wavelet Transform (DWT) combined with neural networks are investigated in recognising the tool’s condition by comparing the characteristics of the tool to those of known conditions in the training set. The experimental results have shown high performance when using the infrared data in comparison to visual images for the selected image and signal processing algorithms