Layer assignment and routing optimization for advanced technologies

As VLSI technology scales to deep sub-micron and beyond, it becomes increasingly challenging to achieve timing closure for VLSI design. Since a complete design flow consists of several phases, such as logic synthesis, placement, and routing, interconnect synthesis plays an important role which includes buffer insertion/sizing and timing-driven routing. Although progress has been achieved by many advanced routing techniques, the following aspects can be exploited sufficiently for further improvement: (1) incremental layer assignment for timing optimization; (2) signal routing with the requirement of regularity; (3) power-efficient optical-electrical interconnect paradigm. Thus, to perform the layer assignment and routing optimization for advanced technologies, an automated routing engine in a global view is essential to benefit the interconnect design while satisfying specific requirements. This dissertation proposes a set of algorithms and methodology on layer assignment and routing optimization for advanced technologies. The research includes two timing-driven incremental layer assignment approaches, synergistic topology generation and routing synthesis for signal groups, and optical-electrical routing design for power efficiency. For incremental layer assignment, most of the conventional approaches target via minimization but neglect the timing issues. Meanwhile, via delays are ignored but should be considered in emerging technology nodes. Then two timing-driven incremental layer assignment frameworks are proposed, where all the nets are solved simultaneously with the integration of via delays: (1) optimization of the total sum of net delays and reduction of slew violations; (2) minimization of critical path timing in selected nets. For on-chip signal routing, the bundled bits in one group may have different pin locations, but they have to be routed in a regular manner by sharing common topologies. Very few previous works target inter-bit regularity via multi-layer topology selection. Furthermore, the routability and wire-length of the signal bits should also be optimized. Then an advanced synergistic routing engine is promoted, which is able to not only control routability and wire-length but also guide each bit routing intelligently for design regularity. For optical-electrical co-design routing, optical interconnect shows its advantage due to the dominance of bandwidth-distance-power properties. The previous works lack a detailed exploration of optical-electrical co-design for on-chip interconnects. During the transmission, signal quality can be affected by various loss sources and Electrical to Optical (EO)/Optical to Electrical (OE) conversion overheads should also be considered. Then a power-efficient routing flow for on-chip signals is presented, where optical connections can collaborate with electrical wires seamlessly. The effectiveness of proposed algorithms and techniques is demonstrated in this dissertation. These approaches are able to achieve the improvements regarding specific metrics and eventually benefit the routing flow.Electrical and Computer Engineerin

Broadening the Scope of Multi-Objective Optimizations in Physical Synthesis of Integrated Circuits.

In modern VLSI design, physical synthesis tools are primarily responsible for satisfying chip-performance constraints by invoking a broad range of circuit optimizations, such as buffer insertion, logic restructuring, gate sizing and relocation. This process is known as timing closure. Our research seeks more powerful and efficient optimizations to improve the state of the art in modern chip design. In particular, we integrate timing-driven relocation, retiming, logic cloning, buffer insertion and gate sizing in novel ways to create powerful circuit transformations that help satisfy setup-time constraints. State-of-the-art physical synthesis optimizations are typically applied at two scales: i) global algorithms that affect the entire netlist and ii) local transformations that focus on a handful of gates or interconnections. The scale of modern chip designs dictates that only near-linear-time optimization algorithms can be applied at the global scope — typically limited to wirelength-driven placement and legalization. Localized transformations can rely on more time-consuming optimizations with accurate delay models. Few techniques bridge the gap between fully-global and localized optimizations. This dissertation broadens the scope of physical synthesis optimization to include accurate transformations operating between the global and local scales. In particular, we integrate groups of related transformations to break circular dependencies and increase the number of circuit elements that can be jointly optimized to escape local minima. Integrated transformations in this dissertation are developed by identifying and removing obstacles to successful optimizations. Integration is achieved through mapping multiple operations to rigorous mathematical optimization problems that can be solved simultaneously. We achieve computational scalability in our techniques by leveraging analytical delay models and focusing optimization efforts on carefully selected regions of the chip. In this regard, we make extensive use of a linear interconnect-delay model that accounts for the impact of subsequent repeated insertion. Our integrated transformations are evaluated on high-performance circuits with over 100,000 gates. Integrated optimization techniques described in this dissertation ensure graceful timing-closure process and impact nearly every aspect of a typical physical synthesis flow. They have been validated in EDA tools used at IBM for physical synthesis of high-performance CPU and ASIC designs, where they significantly improved chip performance.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/78744/1/iamyou_1.pd

Working Notes from the 1992 AAAI Workshop on Automating Software Design. Theme: Domain Specific Software Design

The goal of this workshop is to identify different architectural approaches to building domain-specific software design systems and to explore issues unique to domain-specific (vs. general-purpose) software design. Some general issues that cut across the particular software design domain include: (1) knowledge representation, acquisition, and maintenance; (2) specialized software design techniques; and (3) user interaction and user interface

Power Management for Energy Systems

The thesis deals with control methods for flexible and efficient power consumption in commercial refrigeration systems that possess thermal storage capabilities, and for facilitation of more environmental sustainable power production technologies such as wind power. We apply economic model predictive control as the overriding control strategy and present novel studies on suitable modeling and problem formulations for the industrial applications, means to handle uncertainty in the control problems, and dedicated optimization routines to solve the problems involved. Along the way, we present careful numerical simulations with simple case studies as well as validated models in realistic scenarios. The thesis consists of a summary report and a collection of 13 research papers written during the period Marts 2010 to February 2013. Four are published in international peer-reviewed scientific journals and 9 are published at international peer-reviewed scientific conferences

Programmable stochastic processors

As traditional approaches for reducing power in microprocessors are being exhausted, extreme power challenges call for unconventional approaches to power reduction. Recent research has shown substantial promise for application-specific stochastic computing, i.e., computing that exploits application error tolerance to enable careful relaxation of correctness guarantees provided by hardware in order to reduce power. This dissertation explores the feasibility, challenges, and potential benefits of stochastic computing in the context of programmable general purpose processors. Specifically, the dissertation describes design-level techniques that minimize the power of a processor for a non-zero error rate or allow a processor to fail gracefully when operated over a range of non-zero error rates. It presents microarchitectural design principles that allow a processor to trade off reliability and energy more efficiently to minimize energy when exploiting error resilience. It demonstrates the benefit of using compiler optimizations that optimize a binary to enable more energy savings when operating at a non-zero error rate. It also demonstrates significant benefits for a programmable stochastic processor prototype that improves energy efficiency by carefully relaxing correctness and exposing errors in applications running on a commodity processor. This dissertation on programmable stochastic processors conclusively shows that the architecture and design of processors and applications should be approached differently in scenarios where errors are allowed to be exposed from the hardware to higher levels of the compute stack. Significant energy benefits are demonstrated for design-, architecture-, compiler-, and application-level optimizations for general purpose programmable stochastic processors

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

Third International Symposium on Artificial Intelligence, Robotics, and Automation for Space 1994

The Third International Symposium on Artificial Intelligence, Robotics, and Automation for Space (i-SAIRAS 94), held October 18-20, 1994, in Pasadena, California, was jointly sponsored by NASA, ESA, and Japan's National Space Development Agency, and was hosted by the Jet Propulsion Laboratory (JPL) of the California Institute of Technology. i-SAIRAS 94 featured presentations covering a variety of technical and programmatic topics, ranging from underlying basic technology to specific applications of artificial intelligence and robotics to space missions. i-SAIRAS 94 featured a special workshop on planning and scheduling and provided scientists, engineers, and managers with the opportunity to exchange theoretical ideas, practical results, and program plans in such areas as space mission control, space vehicle processing, data analysis, autonomous spacecraft, space robots and rovers, satellite servicing, and intelligent instruments

Energy Measurements of High Performance Computing Systems: From Instrumentation to Analysis

Energy efficiency is a major criterion for computing in general and High Performance Computing in particular. When optimizing for energy efficiency, it is essential to measure the underlying metric: energy consumption. To fully leverage energy measurements, their quality needs to be well-understood. To that end, this thesis provides a rigorous evaluation of various energy measurement techniques. I demonstrate how the deliberate selection of instrumentation points, sensors, and analog processing schemes can enhance the temporal and spatial resolution while preserving a well-known accuracy. Further, I evaluate a scalable energy measurement solution for production HPC systems and address its shortcomings. Such high-resolution and large-scale measurements present challenges regarding the management of large volumes of generated metric data. I address these challenges with a scalable infrastructure for collecting, storing, and analyzing metric data. With this infrastructure, I also introduce a novel persistent storage scheme for metric time series data, which allows efficient queries for aggregate timelines. To ensure that it satisfies the demanding requirements for scalable power measurements, I conduct an extensive performance evaluation and describe a productive deployment of the infrastructure. Finally, I describe different approaches and practical examples of analyses based on energy measurement data. In particular, I focus on the combination of energy measurements and application performance traces. However, interweaving fine-grained power recordings and application events requires accurately synchronized timestamps on both sides. To overcome this obstacle, I develop a resilient and automated technique for time synchronization, which utilizes crosscorrelation of a specifically influenced power measurement signal. Ultimately, this careful combination of sophisticated energy measurements and application performance traces yields a detailed insight into application and system energy efficiency at full-scale HPC systems and down to millisecond-range regions.:1 Introduction 2 Background and Related Work 2.1 Basic Concepts of Energy Measurements 2.1.1 Basics of Metrology 2.1.2 Measuring Voltage, Current, and Power 2.1.3 Measurement Signal Conditioning and Analog-to-Digital Conversion 2.2 Power Measurements for Computing Systems 2.2.1 Measuring Compute Nodes using External Power Meters 2.2.2 Custom Solutions for Measuring Compute Node Power 2.2.3 Measurement Solutions of System Integrators 2.2.4 CPU Energy Counters 2.2.5 Using Models to Determine Energy Consumption 2.3 Processing of Power Measurement Data 2.3.1 Time Series Databases 2.3.2 Data Center Monitoring Systems 2.4 Influences on the Energy Consumption of Computing Systems 2.4.1 Processor Power Consumption Breakdown 2.4.2 Energy-Efficient Hardware Configuration 2.5 HPC Performance and Energy Analysis 2.5.1 Performance Analysis Techniques 2.5.2 HPC Performance Analysis Tools 2.5.3 Combining Application and Power Measurements 2.6 Conclusion 3 Evaluating and Improving Energy Measurements 3.1 Description of the Systems Under Test 3.2 Instrumentation Points and Measurement Sensors 3.2.1 Analog Measurement at Voltage Regulators 3.2.2 Instrumentation with Hall Effect Transducers 3.2.3 Modular Instrumentation of DC Consumers 3.2.4 Optimal Wiring for Shunt-Based Measurements 3.2.5 Node-Level Instrumentation for HPC Systems 3.3 Analog Signal Conditioning and Analog-to-Digital Conversion 3.3.1 Signal Amplification 3.3.2 Analog Filtering and Analog-To-Digital Conversion 3.3.3 Integrated Solutions for High-Resolution Measurement 3.4 Accuracy Evaluation and Calibration 3.4.1 Synthetic Workloads for Evaluating Power Measurements 3.4.2 Improving and Evaluating the Accuracy of a Single-Node Measuring System 3.4.3 Absolute Accuracy Evaluation of a Many-Node Measuring System 3.5 Evaluating Temporal Granularity and Energy Correctness 3.5.1 Measurement Signal Bandwidth at Different Instrumentation Points 3.5.2 Retaining Energy Correctness During Digital Processing 3.6 Evaluating CPU Energy Counters 3.6.1 Energy Readouts with RAPL 3.6.2 Methodology 3.6.3 RAPL on Intel Sandy Bridge-EP 3.6.4 RAPL on Intel Haswell-EP and Skylake-SP 3.7 Conclusion 4 A Scalable Infrastructure for Processing Power Measurement Data 4.1 Requirements for Power Measurement Data Processing 4.2 Concepts and Implementation of Measurement Data Management 4.2.1 Message-Based Communication between Agents 4.2.2 Protocols 4.2.3 Application Programming Interfaces 4.2.4 Efficient Metric Time Series Storage and Retrieval 4.2.5 Hierarchical Timeline Aggregation 4.3 Performance Evaluation 4.3.1 Benchmark Hardware Specifications 4.3.2 Throughput in Symmetric Configuration with Replication 4.3.3 Throughput with Many Data Sources and Single Consumers 4.3.4 Temporary Storage in Message Queues 4.3.5 Persistent Metric Time Series Request Performance 4.3.6 Performance Comparison with Contemporary Time Series Storage Solutions 4.3.7 Practical Usage of MetricQ 4.4 Conclusion 5 Energy Efficiency Analysis 5.1 General Energy Efficiency Analysis Scenarios 5.1.1 Live Visualization of Power Measurements 5.1.2 Visualization of Long-Term Measurements 5.1.3 Integration in Application Performance Traces 5.1.4 Graphical Analysis of Application Power Traces 5.2 Correlating Power Measurements with Application Events 5.2.1 Challenges for Time Synchronization of Power Measurements 5.2.2 Reliable Automatic Time Synchronization with Correlation Sequences 5.2.3 Creating a Correlation Signal on a Power Measurement Channel 5.2.4 Processing the Correlation Signal and Measured Power Values 5.2.5 Common Oversampling of the Correlation Signals at Different Rates 5.2.6 Evaluation of Correlation and Time Synchronization 5.3 Use Cases for Application Power Traces 5.3.1 Analyzing Complex Power Anomalies 5.3.2 Quantifying C-State Transitions 5.3.3 Measuring the Dynamic Power Consumption of HPC Applications 5.4 Conclusion 6 Summary and Outloo

Fuelling the zero-emissions road freight of the future: routing of mobile fuellers

The future of zero-emissions road freight is closely tied to the sufficient availability of new and clean fuel options such as electricity and Hydrogen. In goods distribution using Electric Commercial Vehicles (ECVs) and Hydrogen Fuel Cell Vehicles (HFCVs) a major challenge in the transition period would pertain to their limited autonomy and scarce and unevenly distributed refuelling stations. One viable solution to facilitate and speed up the adoption of ECVs/HFCVs by logistics, however, is to get the fuel to the point where it is needed (instead of diverting the route of delivery vehicles to refuelling stations) using "Mobile Fuellers (MFs)". These are mobile battery swapping/recharging vans or mobile Hydrogen fuellers that can travel to a running ECV/HFCV to provide the fuel they require to complete their delivery routes at a rendezvous time and space. In this presentation, new vehicle routing models will be presented for a third party company that provides MF services. In the proposed problem variant, the MF provider company receives routing plans of multiple customer companies and has to design routes for a fleet of capacitated MFs that have to synchronise their routes with the running vehicles to deliver the required amount of fuel on-the-fly. This presentation will discuss and compare several mathematical models based on different business models and collaborative logistics scenarios