A Modern Primer on Processing in Memory

Modern computing systems are overwhelmingly designed to move data to computation. This design choice goes directly against at least three key trends in computing that cause performance, scalability and energy bottlenecks: (1) data access is a key bottleneck as many important applications are increasingly data-intensive, and memory bandwidth and energy do not scale well, (2) energy consumption is a key limiter in almost all computing platforms, especially server and mobile systems, (3) data movement, especially off-chip to on-chip, is very expensive in terms of bandwidth, energy and latency, much more so than computation. These trends are especially severely-felt in the data-intensive server and energy-constrained mobile systems of today. At the same time, conventional memory technology is facing many technology scaling challenges in terms of reliability, energy, and performance. As a result, memory system architects are open to organizing memory in different ways and making it more intelligent, at the expense of higher cost. The emergence of 3D-stacked memory plus logic, the adoption of error correcting codes inside the latest DRAM chips, proliferation of different main memory standards and chips, specialized for different purposes (e.g., graphics, low-power, high bandwidth, low latency), and the necessity of designing new solutions to serious reliability and security issues, such as the RowHammer phenomenon, are an evidence of this trend. This chapter discusses recent research that aims to practically enable computation close to data, an approach we call processing-in-memory (PIM). PIM places computation mechanisms in or near where the data is stored (i.e., inside the memory chips, in the logic layer of 3D-stacked memory, or in the memory controllers), so that data movement between the computation units and memory is reduced or eliminated.Comment: arXiv admin note: substantial text overlap with arXiv:1903.0398

Doctor of Philosophy

dissertationIn-memory big data applications are growing in popularity, including in-memory versions of the MapReduce framework. The move away from disk-based datasets shifts the performance bottleneck from slow disk accesses to memory bandwidth. MapReduce is a data-parallel application, and is therefore amenable to being executed on as many parallel processors as possible, with each processor requiring high amounts of memory bandwidth. We propose using Near Data Computing (NDC) as a means to develop systems that are optimized for in-memory MapReduce workloads, offering high compute parallelism and even higher memory bandwidth. This dissertation explores three different implementations and styles of NDC to improve MapReduce execution. First, we use 3D-stacked memory+logic devices to process the Map phase on compute elements in close proximity to database splits. Second, we attempt to replicate the performance characteristics of the 3D-stacked NDC using only commodity memory and inexpensive processors to improve performance of both Map and Reduce phases. Finally, we incorporate fixed-function hardware accelerators to improve sorting performance within the Map phase. This dissertation shows that it is possible to improve in-memory MapReduce performance by potentially two orders of magnitude by designing system and memory architectures that are specifically tailored to that end

Hardware Acceleration for Unstructured Big Data and Natural Language Processing.

The confluence of the rapid growth in electronic data in recent years, and the renewed interest in domain-specific hardware accelerators presents exciting technical opportunities. Traditional scale-out solutions for processing the vast amounts of text data have been shown to be energy- and cost-inefficient. In contrast, custom hardware accelerators can provide higher throughputs, lower latencies, and significant energy savings. In this thesis, I present a set of hardware accelerators for unstructured big-data processing and natural language processing. The first accelerator, called HAWK, aims to speed up the processing of ad hoc queries against large in-memory logs. HAWK is motivated by the observation that traditional software-based tools for processing large text corpora use memory bandwidth inefficiently due to software overheads, and, thus, fall far short of peak scan rates possible on modern memory systems. HAWK is designed to process data at a constant rate of 32 GB/s—faster than most extant memory systems. I demonstrate that HAWK outperforms state-of-the-art software solutions for text processing, almost by an order of magnitude in many cases. HAWK occupies an area of 45 sq-mm in its pareto-optimal configuration and consumes 22 W of power, well within the area and power envelopes of modern CPU chips. The second accelerator I propose aims to speed up similarity measurement calculations for semantic search in the natural language processing space. By leveraging the latency hiding concepts of multi-threading and simple scheduling mechanisms, my design maximizes functional unit utilization. This similarity measurement accelerator provides speedups of 36x-42x over optimized software running on server-class cores, while requiring 56x-58x lower energy, and only 1.3% of the area.PhDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116712/1/prateekt_1.pd

Experimental Evaluation and Comparison of Time-Multiplexed Multi-FPGA Routing Architectures

Emulating large complex designs require multi-FPGA systems (MFS). However, inter-FPGA communication is confronted by the challenge of lack of interconnect capacity due to limited number of FPGA input/output (I/O) pins. Serializing parallel signals onto a single trace effectively addresses the limited I/O pin obstacle. Besides the multiplexing scheme and multiplexing ratio (number of inter-FPGA signals per trace), the choice of the MFS routing architecture also affect the critical path latency. The routing architecture of an MFS is the interconnection pattern of FPGAs, fixed wires and/or programmable interconnect chips. Performance of existing MFS routing architectures is also limited by off-chip interface selection. In this dissertation we proposed novel 2D and 3D latency-optimized time-multiplexed MFS routing architectures. We used rigorous experimental approach and real sequential benchmark circuits to evaluate and compare the proposed and existing MFS routing architectures. This research provides a new insight into the encouraging effects of using off-chip optical interface and three dimensional MFS routing architectures. The vertical stacking results in shorter off-chip links improving the overall system frequency with the additional advantage of smaller footprint area. The proposed 3D architectures employed serialized interconnect between intra-plane and inter-plane FPGAs to address the pin limitation problem. Additionally, all off-chip links are replaced by optical fibers that exhibited latency improvement and resulted in faster MFS. Results indicated that exploiting third dimension provided latency and area improvements as compared to 2D MFS. We also proposed latency-optimized planar 2D MFS architectures in which electrical interconnections are replaced by optical interface in same spatial distribution. Performance evaluation and comparison showed that the proposed architectures have reduced critical path delay and system frequency improvement as compared to conventional MFS. We also experimentally evaluated and compared the system performance of three inter-FPGA communication schemes i.e. Logic Multiplexing, SERDES and MGT in conjunction with two routing architectures i.e. Completely Connected Graph (CCG) and TORUS. Experimental results showed that SERDES attained maximum frequency than the other two schemes. However, for very high multiplexing ratios, the performance of SERDES & MGT became comparable