Inverter-Based Low-Voltage CCII- Design and Its Filter Application

This paper presents a negative type second-generation current conveyor (CCII-). It is based on an inverter-based low-voltage error amplifier, and a negative current mirror. The CCII- could be operated in a very low supply voltage such as ±0.5V. The proposed CCII- has wide input voltage range (±0.24V), wide output voltage (±0.24V) and wide output current range (±24mA). The proposed CCII- has no on-chip capacitors, so it can be designed with standard CMOS digital processes. Moreover, the architecture of the proposed circuit without cascoded MOSFET transistors is easily designed and suitable for low-voltage operation. The proposed CCII- has been fabricated in TSMC 0.18μm CMOS processes and it occupies 1189.91 x 1178.43μm2 (include PADs). It can also be validated by low voltage CCII filters

Circuits for Analog Signal Processing Employing Unconventional Active Elements

Disertační práce se zabývá zaváděním nových struktur moderních aktivních prvků pracujících v napěťovém, proudovém a smíšeném režimu. Funkčnost a chování těchto prvků byly ověřeny prostřednictvím SPICE simulací. V této práci je zahrnuta řada simulací, které dokazují přesnost a dobré vlastnosti těchto prvků, přičemž velký důraz byl kladen na to, aby tyto prvky byly schopny pracovat při nízkém napájecím napětí, jelikož poptávka po přenosných elektronických zařízeních a implantabilních zdravotnických přístrojích stále roste. Tyto přístroje jsou napájeny bateriemi a k tomu, aby byla prodloužena jejich životnost, trend navrhování analogových obvodů směřuje k stále většímu snižování spotřeby a napájecího napětí. Hlavním přínosem této práce je návrh nových CMOS struktur: CCII (Current Conveyor Second Generation) na základě BD (Bulk Driven), FG (Floating Gate) a QFG (Quasi Floating Gate); DVCC (Differential Voltage Current Conveyor) na základě FG, transkonduktor na základě nové techniky BD_QFG (Bulk Driven_Quasi Floating Gate), CCCDBA (Current Controlled Current Differencing Buffered Amplifier) na základě GD (Gate Driven), VDBA (Voltage Differencing Buffered Amplifier) na základě GD a DBeTA (Differential_Input Buffered and External Transconductance Amplifier) na základě BD. Dále je uvedeno několik zajímavých aplikací užívajících výše jmenované prvky. Získané výsledky simulací odpovídají teoretickým předpokladům.The dissertation thesis deals with implementing new structures of modern active elements working in voltage_, current_, and mixed mode. The functionality and behavior of these elements have been verified by SPICE simulation. Sufficient numbers of simulated plots are included in this thesis to illustrate the precise and strong behavior of those elements. However, a big attention to implement active elements by utilizing LV LP (Low Voltage Low Power) techniques is given in this thesis. This attention came from the fact that growing demand of portable electronic equipments and implantable medical devices are pushing the development towards LV LP integrated circuits because of their influence on batteries lifetime. More specifically, the main contribution of this thesis is to implement new CMOS structures of: CCII (Current Conveyor Second Generation) based on BD (Bulk Driven), FG (Floating Gate) and QFG (Quasi Floating Gate); DVCC (Differential Voltage Current Conveyor) based on FG; Transconductor based on new technique of BD_QFG (Bulk Driven_Quasi Floating Gate); CCCDBA (Current Controlled Current Differencing Buffered Amplifier) based on conventional GD (Gate Driven); VDBA (Voltage Differencing Buffered Amplifier) based on GD. Moreover, defining new active element i.e. DBeTA (Differential_Input Buffered and External Transconductance Amplifier) based on BD is also one of the main contributions of this thesis. To confirm the workability and attractive properties of the proposed circuits many applications were exhibited. The given results agree well with the theoretical anticipation.

Novel active function blocks and their applications in frequency filters and quadrature oscillators

Kmitočtové filtry a sinusoidní oscilátory jsou lineární elektronické obvody, které jsou používány v široké oblasti elektroniky a jsou základními stavebními bloky v analogovém zpracování signálu. V poslední dekádě pro tento účel bylo prezentováno velké množství stavebních funkčních bloků. V letech 2000 a 2006 na Ústavu telekomunikací, VUT v Brně byly definovány univerzální proudový konvejor (UCC) a univerzální napět'ový konvejor (UVC) a vyrobeny ve spolupráci s firmou AMI Semiconductor Czech, Ltd. Ovšem, stále existuje požadavek na vývoj nových aktivních prvků, které nabízejí nové výhody. Hlavní přínos práce proto spočívá v definici dalších původních aktivních stavebních bloků jako jsou differential-input buffered and transconductance amplifier (DBTA), current follower transconductance amplifier (CFTA), z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), generalized current follower differential input transconductance amplifier (GCFDITA), voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), a minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Pomocí navržených aktivních stavebních bloků byly prezentovány původní zapojení fázovacích článků prvního řádu, univerzální filtry druhého řádu, ekvivalenty obvodu typu KHN, inverzní filtry, aktivní simulátory uzemněného induktoru a kvadraturní sinusoidní oscilátory pracující v proudovém, napět'ovém a smíšeném módu. Chování navržených obvodů byla ověřena simulací v prostředí SPICE a ve vybraných případech experimentálním měřením.Frequency filters and sinusoidal oscillators are linear electric circuits that are used in wide area of electronics and also are the basic building blocks in analogue signal processing. In the last decade, huge number of active building blocks (ABBs) were presented for this purpose. In 2000 and 2006, the universal current conveyor (UCC) and the universal voltage conveyor (UVC), respectively, were designed at the Department of Telecommunication, BUT, Brno, and produced in cooperation with AMI Semiconductor Czech, Ltd. There is still the need to develop new active elements that offer new advantages. The main contribution of this thesis is, therefore, the definition of other novel ABBs such as the differential-input buffered and transconductance amplifier (DBTA), the current follower transconductance amplifier (CFTA), the z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), the generalized current follower differential input transconductance amplifier (GCFDITA), the voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), and the minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Using the proposed ABBs, novel structures of first-order all-pass filters, second-order universal filters, KHN-equivalent circuits, inverse filters, active grounded inductance simulators, and quadrature sinusoidal oscillators working in the current-, voltage-, or mixed-mode are presented. The behavior of the proposed circuits has been verified by SPICE simulations and in selected cases also by experimental measurements.

Novel Current-Mode Sensor Interfacing and Radio Blocks for Cell Culture Monitoring

Since 2004 Imperial College has been developing the world’s first application-specific instrumentation aiming at the on-line, in-situ, physiochemical monitoring of adult stem cell cultures. That effort is internationally known as the ‘Intelligent Stem Cell Culture Systems’ (ISCCS) project. The ISCCS platform is formed by the functional integration of biosensors, interfacing electronics and bioreactors. Contrary to the PCB-level ISCCS platform the work presented in this thesis relates to the realization of a miniaturized cell culture monitoring platform. Specifically, this thesis details the synthesis and fabrication of pivotal VLSI circuit blocks suitable for the construction of a miniaturized microelectronic cell monitoring platform. The thesis is composed of two main parts. The first part details the design and operation of a two-stage current-input currentoutput topology suitable for three-electrode amperometric sensor measurements. The first stage is a CMOS-dual rail-class AB-current conveyor providing a low impedancevirtual ground node for a current input. The second stage is a novel hyperbolic-sinebased externally-linear internally-non-linear current amplification stage. This stage bases its operation upon the compressive sinh−1 conversion of the interfaced current to an intermediate auxiliary voltage and the subsequent sinh expansion of the same voltage. The proposed novel topology has been simulated for current-gain values ranging from 10 to 1000 using the parameters of the commercially available 0.8μm AMS CMOS process. Measured results from a chip fabricated in the same technology are also reported. The proposed interfacing/amplification architecture consumes 0.88-95μW. The second part describes the design and practical evaluation of a 13.56MHz frequency shift keying (FSK) short-range (5cm) telemetry link suitable for the monitoring of incubated cultures. Prior to the design of the full FSK radio system, a pair of 13.56MHz antennae are characterized experimentally. The experimental S-parameter-value determination of the 13.56MHz wireless link is incorporated into the Cadence Design Framework allowing a high fidelity simulation of the reported FSK radio. The transmitter of the proposed system is a novel multi-tapped seven-stage ring-oscillator-based VCO whereas the core of the receiver is an appropriately modified phase locked loop (PLL). Simulated and measured results from a 0.8μm CMOS technology chip are reported

Study of Single-Event Transient Effects on Analog Circuits

Radiation in space is potentially hazardous to microelectronic circuits and systems such as spacecraft electronics. Transient effects on circuits and systems from high energetic particles can interrupt electronics operation or crash the systems. This phenomenon is particularly serious in complementary metal-oxide-semiconductor (CMOS) integrated circuits (ICs) since most of modern ICs are implemented with CMOS technologies. The problem is getting worse with the technology scaling down. Radiation-hardening-by-design (RHBD) is a popular method to build CMOS devices and systems meeting performance criteria in radiation environment. Single-event transient (SET) effects in digital circuits have been studied extensively in the radiation effect community. In recent years analog RHBD has been received increasing attention since analog circuits start showing the vulnerability to the SETs due to the dramatic process scaling. Analog RHBD is still in the research stage. This study is to further study the effects of SET on analog CMOS circuits and introduces cost-effective RHBD approaches to mitigate these effects. The analog circuits concerned in this study include operational amplifiers (op amps), comparators, voltage-controlled oscillators (VCOs), and phase-locked loops (PLLs). Op amp is used to study SET effects on signal amplitude while the comparator, the VCO, and the PLL are used to study SET effects on signal state during transition time. In this work, approaches based on multi-level from transistor, circuit, to system are presented to mitigate the SET effects on the aforementioned circuits. Specifically, RHBD approach based on the circuit level, such as the op amp, adapts the auto-zeroing cancellation technique. The RHBD comparator implemented with dual-well and triple-well is studied and compared at the transistor level. SET effects are mitigated in a LC-tank oscillator by inserting a decoupling resistor. The RHBD PLL is implemented on the system level using triple modular redundancy (TMR) approach. It demonstrates that RHBD at multi-level can be cost-effective to mitigate the SEEs in analog circuits. In addition, SETs detection approaches are provided in this dissertation so that various mitigation approaches can be implemented more effectively. Performances and effectiveness of the proposed RHBD are validated through SPICE simulations on the schematic and pulsed-laser experiments on the fabricated circuits. The proposed and tested RHBD techniques can be applied to other relevant analog circuits in the industry to achieve radiation-tolerance

Minimum component high frequency current mode rectifier

In this paper a current mode full wave rectifier circuit is proposed. The current mode rectifiercircuit is implemented utilizing a floating current source (FCS) as an active element. Theminimum component full wave rectifier utilizes only a single floating current source, twodiodes and two grounded resistors. The extremely simple implementation enjoys highfrequency operation and provides both inverting and non-inverting rectified outputssimultaneously. The rectifier system can work up to a frequency of 500MHz with acceptabledistortion. The circuit exhibits low power consumption at ±0.75V supply voltage. Thenon-ideal and temperature analysis was also performed to study their impact on itsperformance. It was also shown that FCS can work as half wave rectifier as well. Theperformance of the circuit is evaluated using 0.18μm TSMC CMOS parameters using Hspice.Keywords: current-mode circuits; floating current source; high frequency; rectifier

A Novel Current-Mode Full-Wave Rectifier Based on One CDTA and Two Diodes

Precision rectifiers are important building blocks for analog signal processing. The traditional approach based on diodes and operational amplifiers (OpAmps) exhibits undesirable effects caused by limited OpAmp slew rate and diode commutations. In the paper, a full-wave rectifier based on one CDTA and two Schottky diodes is presented. The PSpice simulation results are included

Realization of Resistorless Wave Active Filter using Differential Voltage Current Controlled Conveyor Transconductance Amplifier

In this paper, a resistorless realization of high order voltage mode wave active filter based on Differential Voltage current controlled conveyor transconductance amplifier (DVCCCTA) is presented. The wave method is used for simulating reflected and incident wave for basic building block i.e. series inductor and configuring it for other passive element realization by making appropriate connection. The proposed structure uses grounded capacitors and possesses electronic tunability of cutoff frequency. The proposed approach is verified for a 4th order low pass filter through SPICE simulation using 0.25µm TSMC CMOS technology parameters

CMOS negative resistance circuits

Active resistors in VLSI technology have grown in stature as they enable the design of large resistive loads without using excessively bulky resistors, or a high voltage supply. Active resistors designed in CMOS technology have the property of being voltage controlled, which permits the design of negative resistance circuits. A negative resistance circuit has the property in which the current is a decreasing function of the input voltage, and has an I-V curve with a negative slope. They have the potential of being a key building block for larger electronic systems in VLSI technology, with applications in various fundamental circuits such as amplifiers and oscillators. A detailed characterization of negative resistance circuits is presented in this thesis. Important large and small signal characteristics, including noise, linearity and power consumption are investigated. A strategy for designing wide bandwidth active resistors is proposed with supporting analysis. Key stability issues that have not previously been reported are brought forward and the stability of larger circuits that accommodate a negative resistor are investigated. To conclude the thesis, design applications in which negative resistors have been used to improve the performance of larger electronic systems are demonstrated. These include the design of a low phase noise current mode oscillator and a high bandwidth inverting feedback amplifi

Digital control for automating feed distribution in feedlots

An investigation was conducted to determine the feasibility of automatic controls to automate feed distribution in feedlots. The control approach was restricted to compatibility with conventional feeding equipment. Input control signals were taken to originate from commonly available mechanical and electronic sensors. The control system was implemented with standard digital logic components;The proposed digital control system is based on a railguided, self-propelled automatic vehicle capable of delivering feed sequentially to 255 pens located on both sides of a single feeding path. A manual, closed-loop control system consisting of the following functions was developed: (1) pen identification, (2) initialization control, (3) feeding mode, (4) exit from feeding mode, (5) re-entry into feeding mode, (6) end of feeding cycle, (7) ground drive and conveyor control, (8) interface and auto/manual mode, (9) monitoring of automated system and (10) data and failure display and alarm. The control system allows either automatic or manual operation of the feeding vehicle. Digital electronic circuits capable of implementing the desired control functions were designed;The feeding cycle is manually initiated and automatically terminated when feed has been delivered to all pens requiring feed. It can be partially programmed to enable feed delivery to sections of the feedlot. Two feed rations can be delivered. The feeding status of each pen is recorded. The pen feed rations are stored in reprogrammable memories;The operation of the automated feeding system is based on the automatic identification of the feedlot pens. The number assigned to a pen is coded, using binary pulse-code modulation. Frequency-shift keying is used to transmit the coded number. The received coded number is recovered by specialized communication circuits and then validated;The control system monitors the vehicle components and the major electronic circuits to detect failures, prevent damage and produce a safe operation. Furthermore, it incorporates safety sensors and logic circuitry to meet the basic safety requirements pertaining to automated vehicles;The proposed automated feed distribution system for feedlots is expected to: (1) reduce management requirements through automatic distribution of feed to cattle raised in pens, (2) increase efficiency of feeding operation by eliminating time losses associated with secondary feed transfer, (3) eliminate damage to feedbunks through positive guidance of the vehicle by rails, and (4) save energy by eliminating secondary feed transfer