On Multicast in Asynchronous Networks-on-Chip: Techniques, Architectures, and FPGA Implementation

In this era of exascale computing, conventional synchronous design techniques are facing unprecedented challenges. The consumer electronics market is replete with many-core systems in the range of 16 cores to thousands of cores on chip, integrating multi-billion transistors. However, with this ever increasing complexity, the traditional design approaches are facing key issues such as increasing chip power, process variability, aging, thermal problems, and scalability. An alternative paradigm that has gained significant interest in the last decade is asynchronous design. Asynchronous designs have several potential advantages: they are naturally energy proportional, burning power only when active, do not require complex clock distribution, are robust to different forms of variability, and provide ease of composability for heterogeneous platforms. Networks-on-chip (NoCs) is an interconnect paradigm that has been introduced to deal with the ever-increasing system complexity. NoCs provide a distributed, scalable, and efficient interconnect solution for today’s many-core systems. Moreover, NoCs are a natural match with asynchronous design techniques, as they separate communication infrastructure and timing from the computational elements. To this end, globally-asynchronous locally-synchronous (GALS) systems that interconnect multiple processing cores, operating at different clock speeds, using an asynchronous NoC, have gained significant interest. While asynchronous NoCs have several advantages, they also face a key challenge of supporting new types of traffic patterns. Once such pattern is multicast communication, where a source sends packets to arbitrary number of destinations. Multicast is not only common in parallel computing, such as for cache coherency, but also for emerging areas such as neuromorphic computing. This important capability has been largely missing from asynchronous NoCs. This thesis introduces several efficient multicast solutions for these interconnects. In particular, techniques, and network architectures are introduced to support high-performance and low-power multicast. Two leading network topologies are the focus: a variant mesh-of-trees (MoT) and a 2D mesh. In addition, for a more realistic implementation and analysis, as well as significantly advancing the field of asynchronous NoCs, this thesis also targets synthesis of these NoCs on commercial FPGAs. While there has been significant advances in FPGA technologies, there has been only limited research on implementing asynchronous NoCs on FPGAs. To this end, a systematic computeraided design (CAD) methodology has been introduced to efficiently and safely map asynchronous NoCs on FPGAs. Overall, this thesis makes the following three contributions. The first contribution is a multicast solution for a variant MoT network topology. This topology consists of simple low-radix switches, and has been used in high-performance computing platforms. A novel local speculation technique is introduced, where a subset of the network’s switches are speculative that always broadcast every packet. These switches are very simple and have high performance. Speculative switches are surrounded by non-speculative ones that route packets based on their destinations and also throttle any redundant copies created by the former. This hybrid network architecture achieved significant performance and power benefits over other multicast approaches. The second contribution is a multicast solution for a 2D-mesh topology, which is more complex with higher-radix switches and also is more commonly used. A novel continuous-time replication strategy is introduced to optimize the critical multi-way forking operation of a multicast transmission. In this technique, a multicast packet is first stored in an input port of a switch, from where it is sent through distinct output ports towards different destinations concurrently, at each output’s own rate and in continuous time. This strategy is shown to have significant latency and energy benefits over an approach that performs multicast using multiple distinct serial unicasts to each destination. Finally, a systematic CAD methodology is introduced to synthesize asynchronous NoCs on commercial FPGAs. A two-fold goal is targeted: correctness and high performance. For ease of implementation, only existing FPGA synthesis tools are used. Moreover, since asynchronous NoCs involve special asynchronous components, a comprehensive guide is introduced to map these elements correctly and efficiently. Two asynchronous NoC switches are synthesized using the proposed approach on a leading Xilinx FPGA in 28 nm: one that only handles unicast, and the other that also supports multicast. Both showed significant energy benefits with some performance gains over a state-of-the-art synchronous switch

Software-based and regionally-oriented traffic management in Networks-on-Chip

Since the introduction of chip-multiprocessor systems, the number of integrated cores has been steady growing and workload applications have been adapted to exploit the increasing parallelism. This changed the importance of efficient on-chip communication significantly and the infrastructure has to keep step with these new requirements. The work at hand makes significant contributions to the state-of-the-art of the latest generation of such solutions, called Networks-on-Chip, to improve the performance, reliability, and flexible management of these on-chip infrastructures

Control Systems for Silicon Photonic Microring Devices

The continuing growth of microelectronics in speed, scale, and complexity has led to a looming bandwidth bottleneck for traditional electronic interconnects. This has precipitated the penetration of optical interconnects to smaller, more localized scales, in such applications as data centers, supercomputers, and access networks. For this next generation of optical interconnects, the silicon photonic platform has received wide attention for its ability to manifest, more economical, high-performance photonics. The high index contrast and CMOS compatibility of the silicon platform give the potential to intimately integrate small footprint, power-efficient, high-bandwidth photonic interconnects with existing high-performance CMOS microelectronics. Within the silicon photonic platform, traditional photonic elements can be manifested with smaller footprint and higher energy-efficiency. Additionally, the high index contrast allows the successful implementation of silicon microring-based devices, which push the limits on achievable footprint and energy-efficiency metrics. While laboratory demonstrations have testified to their capabilities as powerful modulators, switches, and filters, the commercial implementation of microring-based devices is impeded by their susceptibility to fabrication tolerances and their inherent temperature sensitivity. This work develops and demonstrates methods to resolve the aforementioned sensitivities of microring-based devices. Specifically, the use of integrated heaters to thermally tune and lock microring resonators to laser wavelengths, and the underlying control systems to enable such functionality. The first developed method utilizes power monitoring to show the successful thermal stabilization of a microring modulator under conditions that would normally render it inoperational. In a later demonstration, the photodetector used for power monitoring is co-integrated with the microring modulator, again demonstrating thermal stabilization of a microring modulator and validating the use of defect-enhanced silicon photodiodes for on-chip control systems. Secondly, a generalized method is developed that uses dithering signals to generate anti-symmetric error signals for use in stabilizing microring resonators. A control system utilizing a dithering signal is shown to successfully wavelength lock and thermally stabilize a microring resonator. Characterizations are performed on the robustness and speed of the wavelength locking process when using dithering signals. An FPGA implementation of the control system is used to scale to a WDM microring demultiplexer, demonstrating the simultaneous wavelength locking of multiple microring resonators. Additionally, the dithering technique is adopted to create control systems for microring-based switches, which have traditionally posed a challenging problem due to their multi-state configurations. The aforementioned control systems are rigorously tested for applications with high speed data and analyzed for power efficiency and scalability to show that they can successfully scale to commercial implementations and be the enabling factor in the commercial deployment of microring-based devices

Network-Compute Co-Design for Distributed In-Memory Computing

The booming popularity of online services is rapidly raising the demands for modern datacenters. In order to cope with data deluge, growing user bases, and tight quality of service constraints, service providers deploy massive datacenters with tens to hundreds of thousands of servers, keeping petabytes of latency-critical data memory resident. Such data distribution and the multi-tiered nature of the software used by feature-rich services results in frequent inter-server communication and remote memory access over the network. Hence, networking takes center stage in datacenters. In response to growing internal datacenter network traffic, networking technology is rapidly evolving. Lean user-level protocols, like RDMA, and high-performance fabrics have started making their appearance, dramatically reducing datacenter-wide network latency and offering unprecedented per-server bandwidth. At the same time, the end of Dennard scaling is grinding processor performance improvements to a halt. The net result is a growing mismatch between the per-server network and compute capabilities: it will soon be difficult for a server processor to utilize all of its available network bandwidth. Restoring balance between network and compute capabilities requires tighter co-design of the two. The network interface (NI) is of particular interest, as it lies on the boundary of network and compute. In this thesis, we focus on the design of an NI for a lightweight RDMA-like protocol and its full integration with modern manycore server processors. The NI capabilities scale with both the increasing network bandwidth and the growing number of cores on modern server processors. Leveraging our architecture's integrated NI logic, we introduce new functionality at the network endpoints that yields performance improvements for distributed systems. Such additions include new network operations with stronger semantics tailored to common application requirements and integrated logic for balancing network load across a modern processor's multiple cores. We make the case that exposing richer, end-to-end semantics to the NI is a unique enabler for optimizations that can reduce software complexity and remove significant load from the processor, contributing towards maintaining balance between the two valuable resources of network and compute. Overall, network-compute co-design is an approach that addresses challenges associated with the emerging technological mismatch of compute and networking capabilities, yielding significant performance improvements for distributed memory systems

Decompose and Conquer: Addressing Evasive Errors in Systems on Chip

Modern computer chips comprise many components, including microprocessor cores, memory modules, on-chip networks, and accelerators. Such system-on-chip (SoC) designs are deployed in a variety of computing devices: from internet-of-things, to smartphones, to personal computers, to data centers. In this dissertation, we discuss evasive errors in SoC designs and how these errors can be addressed efficiently. In particular, we focus on two types of errors: design bugs and permanent faults. Design bugs originate from the limited amount of time allowed for design verification and validation. Thus, they are often found in functional features that are rarely activated. Complete functional verification, which can eliminate design bugs, is extremely time-consuming, thus impractical in modern complex SoC designs. Permanent faults are caused by failures of fragile transistors in nano-scale semiconductor manufacturing processes. Indeed, weak transistors may wear out unexpectedly within the lifespan of the design. Hardware structures that reduce the occurrence of permanent faults incur significant silicon area or performance overheads, thus they are infeasible for most cost-sensitive SoC designs. To tackle and overcome these evasive errors efficiently, we propose to leverage the principle of decomposition to lower the complexity of the software analysis or the hardware structures involved. To this end, we present several decomposition techniques, specific to major SoC components. We first focus on microprocessor cores, by presenting a lightweight bug-masking analysis that decomposes a program into individual instructions to identify if a design bug would be masked by the program's execution. We then move to memory subsystems: there, we offer an efficient memory consistency testing framework to detect buggy memory-ordering behaviors, which decomposes the memory-ordering graph into small components based on incremental differences. We also propose a microarchitectural patching solution for memory subsystem bugs, which augments each core node with a small distributed programmable logic, instead of including a global patching module. In the context of on-chip networks, we propose two routing reconfiguration algorithms that bypass faulty network resources. The first computes short-term routes in a distributed fashion, localized to the fault region. The second decomposes application-aware routing computation into simple routing rules so to quickly find deadlock-free, application-optimized routes in a fault-ridden network. Finally, we consider general accelerator modules in SoC designs. When a system includes many accelerators, there are a variety of interactions among them that must be verified to catch buggy interactions. To this end, we decompose such inter-module communication into basic interaction elements, which can be reassembled into new, interesting tests. Overall, we show that the decomposition of complex software algorithms and hardware structures can significantly reduce overheads: up to three orders of magnitude in the bug-masking analysis and the application-aware routing, approximately 50 times in the routing reconfiguration latency, and 5 times on average in the memory-ordering graph checking. These overhead reductions come with losses in error coverage: 23% undetected bug-masking incidents, 39% non-patchable memory bugs, and occasionally we overlook rare patterns of multiple faults. In this dissertation, we discuss the ideas and their trade-offs, and present future research directions.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147637/1/doowon_1.pd

MOCAST 2021

The 10th International Conference on Modern Circuit and System Technologies on Electronics and Communications (MOCAST 2021) will take place in Thessaloniki, Greece, from July 5th to July 7th, 2021. The MOCAST technical program includes all aspects of circuit and system technologies, from modeling to design, verification, implementation, and application. This Special Issue presents extended versions of top-ranking papers in the conference. The topics of MOCAST include:Analog/RF and mixed signal circuits;Digital circuits and systems design;Nonlinear circuits and systems;Device and circuit modeling;High-performance embedded systems;Systems and applications;Sensors and systems;Machine learning and AI applications;Communication; Network systems;Power management;Imagers, MEMS, medical, and displays;Radiation front ends (nuclear and space application);Education in circuits, systems, and communications

PRELIMINARY FINDINGS OF A POTENZIATED PIEZOSURGERGICAL DEVICE AT THE RABBIT SKULL

The number of available ultrasonic osteotomes has remarkably increased. In vitro and in vivo studies have revealed differences between conventional osteotomes, such as rotating or sawing devices, and ultrasound-supported osteotomes (Piezosurgery®) regarding the micromorphology and roughness values of osteotomized bone surfaces. Objective: the present study compares the micro-morphologies and roughness values of osteotomized bone surfaces after the application of rotating and sawing devices, Piezosurgery Medical® and Piezosurgery Medical New Generation Powerful Handpiece. Methods: Fresh, standard-sized bony samples were taken from a rabbit skull using the following osteotomes: rotating and sawing devices, Piezosurgery Medical® and a Piezosurgery Medical New Generation Powerful Handpiece. The required duration of time for each osteotomy was recorded. Micromorphologies and roughness values to characterize the bone surfaces following the different osteotomy methods were described. The prepared surfaces were examined via light microscopy, environmental surface electron microscopy (ESEM), transmission electron microscopy (TEM), confocal laser scanning microscopy (CLSM) and atomic force microscopy. The selective cutting of mineralized tissues while preserving adjacent soft tissue (dura mater and nervous tissue) was studied. Bone necrosis of the osteotomy sites and the vitality of the osteocytes near the sectional plane were investigated, as well as the proportion of apoptosis or cell degeneration. Results and Conclusions: The potential positive effects on bone healing and reossification associated with different devices were evaluated and the comparative analysis among the different devices used was performed, in order to determine the best osteotomes to be employed during cranio-facial surgery