1,274 research outputs found

    Ultra-wideband CMOS power amplifier for wireless body area network applications: a review

    Get PDF
    A survey on ultra-wideband complementary metal-oxide semiconductor (CMOS) power amplifiers for wireless body area network (WBAN) applications is presented in this paper. Formidable growth in the CMOS integrated circuits technology enhances the development in biomedical manufacture. WBAN is a promising mechanism that collects essential data from wearable sensors connected to the network and transmitted it wirelessly to a central patient monitoring station. The ultra-wideband (UWB) technology exploits the frequency band from 3.1 to 10.6 GHz and provides no interference to other communication systems, low power consumption, low-radiated power, and high data rate. These features permit it to be compatible with medical applications. The demand target is to have one transceiver integrated circuit (IC) for WBAN applications, consequently, UWB is utilized to decrease the hardware complexity. The power amplifier (PA) is the common electronic device that employing in the UWB transmitter to boost the input power to the desired output power and then feed it to the antenna of the transmitter. The advance in the design and implementation of ultra-wideband CMOS power amplifiers enhances the performance of the UWB-transceivers for WBAN applications. A review of recently published CMOS PA designs is reported in this paper with comparison tables listing wideband power amplifiers' performance

    CMOS Power Amplifier Design Techniques for UWB Communication: A Review

    Get PDF
    This paper reviews CMOS power amplifier (PA) design techniques in favour of ultra-wideband (UWB) application. The PA circuit design is amongst the most difficult delegation in developing the UWB transmitter due to conditions that must be achieved, including high gain, good input and output matching, efficiency, linearity, low group delay and low power consumption. In order to meet these requirements, many researchers came up with different techniques. Among the techniques used are distributed amplifiers, resistive shunt feedback, RLC matching, shuntshunt feedback, inductive source degeneration, current reuse, shunt peaking, and stagger tuning. Therefore, problems and limitation of UWB CMOS PA and circuit topology are reviewed. A number of works on the UWB CMOS PA from the year 2004 to 2016 are reviewed in this paper. In recent developments, UWB CMOS PA are analysed, hence imparting a comparison of performance criteria based on several different topologies

    An effective AMS Top-Down Methodology Applied to the Design of a Mixed-SignalUWB System-on-Chip

    Get PDF
    The design of Ultra Wideband (UWB) mixed-signal SoC for localization applications in wireless personal area networks is currently investigated by several researchers. The complexity of the design claims for effective top-down methodologies. We propose a layered approach based on VHDL-AMS for the first design stages and on an intelligent use of a circuit-level simulator for the transistor-level phase. We apply the latter just to one block at a time and wrap it within the system-level VHDL-AMS description. This method allows to capture the impact of circuit-level design choices and non-idealities on system performance. To demonstrate the effectiveness of the methodology we show how the refinement of the design affects specific UWB system parameters such as bit-error rate and localization estimations

    A two-stage power amplifier design for ultra-wideband applications

    Get PDF
    In this paper, a two-stage 0.18 μm CMOS power amplifier (PA) for ultra-wideband (UWB) 3 to 5 GHz based on common source inductive degeneration with an auxiliary amplifier is proposed. In this proposal, an auxiliary amplifier is used to place the 2nd harmonic in the core amplified in order to make up for the gain progression phenomena at the main amplifier output node. Simulation results show a power gain of 16 dB with a gain flatness of 0.4 dB and an input 1 dB compression of about -5 dBm from 3 to 5 GHz using a 1.8 V power supply consuming 25 mW. Power added efficiency (PAE) of around 47% at 4 GHz with 50 Ω load impedance was also observed

    Mixed Linearity Improvement Techniques for Ultra-wideband Low Noise Amplifier

    Get PDF
    We present the linearization of an ultra-wideband low noise amplifier (UWB-LNA) operating from 2GHz to 11GHz through combining two linearization methods. The used linearization techniques are the combination of post-distortion cancellation and derivative-superposition linearization methods. The linearized UWB-LNA shows an improved linearity (IIP3) of +12dBm, a minimum noise figure (NFmin.) of 3.6dB, input and output insertion losses (S11 and S22)  below -9dB over the entire working bandwidth, midband gain of 6dB at 5.8GHz, and overall circuit power consumption of 24mW supplied from a 1.5V voltage source. Both UWB-LNA and linearized UWB-LNA designs are verified and simulated with ADS2016.01 software using BSIM3v3 TSMC 180nm CMOS model files. In addition, the linearized UWB-LNA performance is compared with other recent state-of-the-art LNAs
    • …
    corecore