A LOW-POWER 1-Gbps RECONFIGURABLE LDPC DECODER DESIGN FOR MULTIPLE 4G WIRELESS STANDARDS

In this paper we present an efficient system-on-chip implementation of a 1-Gbps LDPC decoder for 4G (or beyond 3G) wireless standards. The decoder has a scalable data path and can be dynamically reconfigured to support multiple 4G standards. We utilize a pipelined version of the layered belief propagation algorithm to achieve partial-parallel decoding of structured LDPC codes. Instead of using the sub-optimal Minsum algorithm, we propose to use the powerful belief propagation (BP) decoding algorithm by designing an area-efficient soft-input soft-output (SISO) decoder. Two power saving schemes are employed to reduce the power consumption up to 65%. The decoder has been synthesized, placed, and routed on a TSMC 90nm 1.0V 8-metal layer CMOS technology with a total area of 3.5 mm2. The maximum clock frequency is 450 MHz and the estimated peak power consumption is 410 mW.NokiaNational Science Foundatio

Configurable and Scalable Turbo Decoder for 4G Wireless Receivers

The increasing requirements of high data rates and quality of service (QoS) in fourth-generation (4G) wireless communication require the implementation of practical capacity approaching codes. In this chapter, the application of Turbo coding schemes that have recently been adopted in the IEEE 802.16e WiMax standard and 3GPP Long Term Evolution (LTE) standard are reviewed. In order to process several 4G wireless standards with a common hardware module, a reconfigurable and scalable Turbo decoder architecture is presented. A parallel Turbo decoding scheme with scalable parallelism tailored to the target throughput is applied to support high data rates in 4G applications. High-level decoding parallelism is achieved by employing contention-free interleavers. A multi-banked memory structure and routing network among memories and MAP decoders are designed to operate at full speed with parallel interleavers. A new on-line address generation technique is introduced to support multiple Turbo interleaving patterns, which avoids the interleaver address memory that is typically necessary in the traditional designs. Design trade-offs in terms of area and power efficiency are analyzed for different parallelism and clock frequency goals

A Flexible LDPC/Turbo Decoder Architecture

Low-density parity-check (LDPC) codes and convolutional Turbo codes are two of the most powerful error correcting codes that are widely used in modern communication systems. In a multi-mode baseband receiver, both LDPC and Turbo decoders may be required. However, the different decoding approaches for LDPC and Turbo codes usually lead to different hardware architectures. In this paper we propose a unified message passing algorithm for LDPC and Turbo codes and introduce a flexible soft-input soft-output (SISO) module to handle LDPC/Turbo decoding. We employ the trellis-based maximum a posteriori (MAP) algorithm as a bridge between LDPC and Turbo codes decoding. We view the LDPC code as a concatenation of n super-codes where each super-code has a simpler trellis structure so that the MAP algorithm can be easily applied to it. We propose a flexible functional unit (FFU) for MAP processing of LDPC and Turbo codes with a low hardware overhead (about 15% area and timing overhead). Based on the FFU, we propose an area-efficient flexible SISO decoder architecture to support LDPC/Turbo codes decoding. Multiple such SISO modules can be embedded into a parallel decoder for higher decoding throughput. As a case study, a flexible LDPC/Turbo decoder has been synthesized on a TSMC 90 nm CMOS technology with a core area of 3.2 mm2. The decoder can support IEEE 802.16e LDPC codes, IEEE 802.11n LDPC codes, and 3GPP LTE Turbo codes. Running at 500 MHz clock frequency, the decoder can sustain up to 600 Mbps LDPC decoding or 450 Mbps Turbo decoding.NokiaNokia Siemens Networks (NSN)XilinxTexas InstrumentsNational Science Foundatio

A High-Performance and Low-Complexity 5G LDPC Decoder: Algorithm and Implementation

5G New Radio (NR) has stringent demands on both performance and complexity for the design of low-density parity-check (LDPC) decoding algorithms and corresponding VLSI implementations. Furthermore, decoders must fully support the wide range of all 5G NR blocklengths and code rates, which is a significant challenge. In this paper, we present a high-performance and low-complexity LDPC decoder, tailor-made to fulfill the 5G requirements. First, to close the gap between belief propagation (BP) decoding and its approximations in hardware, we propose an extension of adjusted min-sum decoding, called generalized adjusted min-sum (GA-MS) decoding. This decoding algorithm flexibly truncates the incoming messages at the check node level and carefully approximates the non-linear functions of BP decoding to balance the error-rate and hardware complexity. Numerical results demonstrate that the proposed fixed-point GAMS has only a minor gap of 0.1 dB compared to floating-point BP under various scenarios of 5G standard specifications. Secondly, we present a fully reconfigurable 5G NR LDPC decoder implementation based on GA-MS decoding. Given that memory occupies a substantial portion of the decoder area, we adopt multiple data compression and approximation techniques to reduce 42.2% of the memory overhead. The corresponding 28nm FD-SOI ASIC decoder has a core area of 1.823 mm2 and operates at 895 MHz. It is compatible with all 5G NR LDPC codes and achieves a peak throughput of 24.42 Gbps and a maximum area efficiency of 13.40 Gbps/mm2 at 4 decoding iterations.Comment: 14 pages, 14 figure

On the Road to 6G: Visions, Requirements, Key Technologies and Testbeds

Fifth generation (5G) mobile communication systems have entered the stage of commercial development, providing users with new services and improved user experiences as well as offering a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified for stimulating the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed

Architecture and Analysis for Next Generation Mobile Signal Processing.

Mobile devices have proliferated at a spectacular rate, with more than 3.3 billion active cell phones in the world. With sales totaling hundreds of billions every year, the mobile phone has arguably become the dominant computing platform, replacing the personal computer. Soon, improvements to today’s smart phones, such as high-bandwidth internet access, high-definition video processing, and human-centric interfaces that integrate voice recognition and video-conferencing will be commonplace. Cost effective and power efficient support for these applications will be required. Looking forward to the next generation of mobile computing, computation requirements will increase by one to three orders of magnitude due to higher data rates, increased complexity algorithms, and greater computation diversity but the power requirements will be just as stringent to ensure reasonable battery lifetimes. The design of the next generation of mobile platforms must address three critical challenges: efficiency, programmability, and adaptivity. The computational efficiency of existing solutions is inadequate and straightforward scaling by increasing the number of cores or the amount of data-level parallelism will not suffice. Programmability provides the opportunity for a single platform to support multiple applications and even multiple standards within each application domain. Programmability also provides: faster time to market as hardware and software development can proceed in parallel; the ability to fix bugs and add features after manufacturing; and, higher chip volumes as a single platform can support a family of mobile devices. Lastly, hardware adaptivity is necessary to maintain efficiency as the computational characteristics of the applications change. Current solutions are tailored specifically for wireless signal processing algorithms, but lose their efficiency when other application domains like high definition video are processed. This thesis addresses these challenges by presenting analysis of next generation mobile signal processing applications and proposing an advanced signal processing architecture to deal with the stringent requirements. An application-centric design approach is taken to design our architecture. First, a next generation wireless protocol and high definition video is analyzed and algorithmic characterizations discussed. From these characterizations, key architectural implications are presented, which form the basis for the advanced signal processor architecture, AnySP.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86344/1/mwoh_1.pd

On the application of graphics processor to wireless receiver design

In many wireless systems, a Turbo decoder is often combined with a soft-output multiple-input and multiple-output (MIMO) detector at the receiver to maximize performance in many 4G and beyond wireless standards. Although custom application specific designs are usually used to meet this challenge, programmable graphics processing units (GPU) has become an alternative to the traditional ASIC and FPGA solution for wireless applications. However, careful architecture-aware algorithm design and mapping are required to maximize performance of a communication block on GPU. For MIMO soft detection, we implemented a new MIMO soft detection algorithm, multi-pass trellis traversal (MTT). For Turbo decoding, we used a parallel window algorithm. We showed that our implementations can achieve high throughput while maintaining good performance. This work will allow us to implement a complete iterative MIMO receiver in software on GPU in the future

A 15.8 pJ/bit/iter quasi-cyclic LDPC decoder for IEEE 802.11n in 90 nm CMOS

We present a low-power quasi-cyclic (QC) low density parity check (LDPC) decoder that meets the throughput requirements of the highest-rate (600 Mbps) modes of the IEEE 802.11n WLAN standard. The design is based on the layered offset-min-sum algorithm and is runtime-programmable to process different code matrices (including all rates and block lengths specified by IEEE 802.11n). The register-transfer-level implementation has been optimized for best energy efficiency. The corresponding 90nm CMOS ASIC has a core area of 1.77mm2 and achieves a maximum throughput of 680 Mbps at 346MHz clock frequency and 10 decoding iterations. The measured energy efficiency is 15.8 pJ/bit/iteration at a nominal operating voltage of 1.0V

Energy-Efficient Computing for Mobile Signal Processing

Mobile devices have rapidly proliferated, and deployment of handheld devices continues to increase at a spectacular rate. As today's devices not only support advanced signal processing of wireless communication data but also provide rich sets of applications, contemporary mobile computing requires both demanding computation and efficiency. Most mobile processors combine general-purpose processors, digital signal processors, and hardwired application-specific integrated circuits to satisfy their high-performance and low-power requirements. However, such a heterogeneous platform is inefficient in area, power and programmability. Improving the efficiency of programmable mobile systems is a critical challenge and an active area of computer systems research. SIMD (single instruction multiple data) architectures are very effective for data-level-parallelism intense algorithms in mobile signal processing. However, new characteristics of advanced wireless/multimedia algorithms require architectural re-evaluation to achieve better energy efficiency. Therefore, fourth generation wireless protocol and high definition mobile video algorithms are analyzed to enhance a wide-SIMD architecture. The key enhancements include 1) programmable crossbar to support complex data alignment, 2) SIMD partitioning to support fine-grain SIMD computation, and 3) fused operation to support accelerating frequently used instruction pairs. Near-threshold computation has been attractive in low-power architecture research because it balances performance and power. To further improve energy efficiency in mobile computing, near-threshold computation is applied to a wide SIMD architecture. This proposed near-threshold wide SIMD architecture-Diet SODA-presents interesting architectural design decisions such as 1) very wide SIMD datapath to compensate for degraded performance induced by near-threshold computation and 2) scatter-gather data prefetcher to exploit large latency gap between memory and the SIMD datapath. Although near-threshold computation provides excellent energy efficiency, it suffers from increased delay variations. A systematic study of delay variations in near-threshold computing is performed and simple techniques-structural duplication and voltage/frequency margining-are explored to tolerate and mitigate the delay variations in near-threshold wide SIMD architectures. This dissertation analyzes representative wireless/multimedia mobile signal processing algorithms, proposes an energy-efficient programmable platform, and evaluates performance and power. A main theme of this dissertation is that the performance and efficiency of programmable embedded systems can be significantly improved with a combination of parallel SIMD and near-threshold computations.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86356/1/swseo_1.pd

High Throughput VLSI Architecture for Soft-Output MIMO Detection Based on A Greedy Graph Algorithm

Maximum-likelihood (ML) decoding is a very computational- intensive task for multiple-input multiple-output (MIMO) wireless channel detection. This paper presents a new graph based algorithm to achieve near ML performance for soft MIMO detection. Instead of using the traditional tree search based structure, we represent the search space of the MIMO signals with a directed graph and a greedy algorithm is ap- plied to compute the a posteriori probability (APP) for each transmitted bit. The proposed detector has two advantages: 1) it keeps a fixed throughput and has a regular and parallel datapath structure which makes it amenable to high speed VLSI implementation, and 2) it attempts to maximize the a posteriori probability by making the locally optimum choice at each stage with the hope of finding the global minimum Euclidean distance for every transmitted bit x_k element of {-1, +1}. Compared to the soft K-best detector, the proposed solution significantly reduces the complexity because sorting is not required, while still maintaining good bit error rate (BER) performance. The proposed greedy detection algorithm has been designed and synthesized for a 4 x 4 16-QAM MIMO system in a TSMC 65 nm CMOS technology. The detector achieves a maximum throughput of 600 Mbps with a 0.79 mm2 core area.Nokia CorporationNational Science Foundatio