A low-pass filter with automatic frequency tuning for a bluetooth receiver

A third-order Gm-C Chebyshev low-pass filter with high linearity and automatic frequency programmability has been designed. The filter is intended to be used as a channel-select filter for a zero-IF Bluetooth receiver. The frequency tuning scheme is simpler and has more relaxed specifications than conventional ones. The filter bandwidth is 0.5 MHz and the overall scheme dissipates 1.1 mA from a 1.8-V supply. The third-order intermodulation (IM3) distortion of the filter for a 1Vpp two-tone signal centered at 350 kHz is −67dB

A low-pass filter with automatic frequency tuning for a bluetooth receiver

A third-order Gm-C Chebyshev low-pass filter with high linearity and automatic frequency programmability has been designed. The filter is intended to be used as a channel-select filter for a zero-IF Bluetooth receiver. The frequency tuning scheme is simpler and has more relaxed specifications than conventional ones. The filter bandwidth is 0.5 MHz and the overall scheme dissipates 1.1 mA from a 1.8-V supply. The third-order intermodulation (IM3) distortion of the filter for a 1Vpp two-tone signal centered at 350 kHz is -67dB.Ministerio de Ciencia y Tecnología TEC2007-67460-C03-02

A Fully-Integrated Reconfigurable Dual-Band Transceiver for Short Range Wireless Communications in 180 nm CMOS

© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.A fully-integrated reconfigurable dual-band (760-960 MHz and 2.4-2.5 GHz) transceiver (TRX) for short range wireless communications is presented. The TRX consists of two individually-optimized RF front-ends for each band and one shared power-scalable analog baseband. The sub-GHz receiver has achieved the maximum 75 dBc 3rd-order harmonic rejection ratio (HRR3) by inserting a Q-enhanced notch filtering RF amplifier (RFA). In 2.4 GHz band, a single-ended-to-differential RFA with gain/phase imbalance compensation is proposed in the receiver. A ΣΔ fractional-N PLL frequency synthesizer with two switchable Class-C VCOs is employed to provide the LOs. Moreover, the integrated multi-mode PAs achieve the output P1dB (OP1dB) of 16.3 dBm and 14.1 dBm with both 25% PAE for sub-GHz and 2.4 GHz bands, respectively. A power-control loop is proposed to detect the input signal PAPR in real-time and flexibly reconfigure the PA's operation modes to enhance the back-off efficiency. With this proposed technique, the PAE of the sub-GHz PA is improved by x3.24 and x1.41 at 9 dB and 3 dB back-off powers, respectively, and the PAE of the 2.4 GHz PA is improved by x2.17 at 6 dB back-off power. The presented transceiver has achieved comparable or even better performance in terms of noise figure, HRR, OP1dB and power efficiency compared with the state-of-the-art.Peer reviewe

Polyphase filter with parametric tuning

Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 201

Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals

Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve

Cyber-security internals of a Skoda Octavia vRS:a hands on approach

The convergence of information technology and vehicular technologies are a growing paradigm, allowing information to be sent by and to vehicles. This information can further be processed by the Electronic Control Unit (ECU) and the Controller Area Network (CAN) for in-vehicle communications or through a mobile phone or server for out-vehicle communication. Information sent by or to the vehicle can be life-critical (e.g. breaking, acceleration, cruise control, emergency communication, etc. . . ). As vehicular technology advances, in-vehicle networks are connected to external networks through 3 and 4G mobile networks, enabling manufacturer and customer monitoring of different aspects of the car. While these services provide valuable information, they also increase the attack surface of the vehicle, and can enable long and short range attacks. In this manuscript, we evaluate the security of the 2017 Skoda Octavia vRS 4x4. Both physical and remote attacks are considered, the key fob rolling code is successfully compromised, privacy attacks are demonstrated through the infotainment system, the Volkswagen Transport Protocol 2.0 is reverse engineered. Additionally, in-car attacks are highlighted and described, providing an overlook of potentially deadly threats by modifying ECU parameters and components enabling digital forensics investigation are identified

High performance continuous-time filters for information transfer systems

Vast attention has been paid to active continuous-time filters over the years. Thus as the cheap, readily available integrated circuit OpAmps replaced their discrete circuit versions, it became feasible to consider active-RC filter circuits using large numbers of OpAmps. Similarly the development of integrated operational transconductance amplifier (OTA) led to new filter configurations. This gave rise to OTA-C filters, using only active devices and capacitors, making it more suitable for integration. The demands on filter circuits have become ever more stringent as the world of electronics and communications has advanced. In addition, the continuing increase in the operating frequencies of modern circuits and systems increases the need for active filters that can perform at these higher frequencies; an area where the LC active filter emerges. What mainly limits the performance of an analog circuit are the non-idealities of the used building blocks and the circuit architecture. This research concentrates on the design issues of high frequency continuous-time integrated filters. Several novel circuit building blocks are introduced. A novel pseudo-differential fully balanced fully symmetric CMOS OTA architecture with inherent common-mode detection is proposed. Through judicious arrangement, the common-mode feedback circuit can be economically implemented. On the level of system architectures, a novel filter low-voltage 4th order RF bandpass filter structure based on emulation of two magnetically coupled resonators is presented. A unique feature of the proposed architecture is using electric coupling to emulate the effect of the coupled-inductors, thus providing bandwidth tuning with small passband ripple. As part of a direct conversion dual-mode 802.11b/Bluetooth receiver, a BiCMOS 5th order low-pass channel selection filter is designed. The filter operated from a single 2.5V supply and achieves a 76dB of out-of-band SFDR. A digital automatic tuning system is also implemented to account for process and temperature variations. As part of a Bluetooth transmitter, a low-power quadrature direct digital frequency synthesizer (DDFS) is presented. Piecewise linear approximation is used to avoid using a ROM look-up table to store the sine values in a conventional DDFS. Significant saving in power consumption, due to the elimination of the ROM, renders the design more suitable for portable wireless communication applications