Unknown dynamics estimator-based output-feedback control for nonlinear pure-feedback systems

Most existing adaptive control designs for nonlinear pure-feedback systems have been derived based on backstepping or dynamic surface control (DSC) methods, requiring full system states to be measurable. The neural networks (NNs) or fuzzy logic systems (FLSs) used to accommodate uncertainties also impose demanding computational cost and sluggish convergence. To address these issues, this paper proposes a new output-feedback control for uncertain pure-feedback systems without using backstepping and function approximator. A coordinate transform is first used to represent the pure-feedback system in a canonical form to evade using the backstepping or DSC scheme. Then the Levant's differentiator is used to reconstruct the unknown states of the derived canonical system. Finally, a new unknown system dynamics estimator with only one tuning parameter is developed to compensate for the lumped unknown dynamics in the feedback control. This leads to an alternative, simple approximation-free control method for pure-feedback systems, where only the system output needs to be measured. The stability of the closed-loop control system, including the unknown dynamics estimator and the feedback control is proved. Comparative simulations and experiments based on a PMSM test-rig are carried out to test and validate the effectiveness of the proposed method

A brief review of neural networks based learning and control and their applications for robots

As an imitation of the biological nervous systems, neural networks (NN), which are characterized with powerful learning ability, have been employed in a wide range of applications, such as control of complex nonlinear systems, optimization, system identification and patterns recognition etc. This article aims to bring a brief review of the state-of-art NN for the complex nonlinear systems. Recent progresses of NNs in both theoretical developments and practical applications are investigated and surveyed. Specifically, NN based robot learning and control applications were further reviewed, including NN based robot manipulator control, NN based human robot interaction and NN based behavior recognition and generation

Robust Distributed Control Protocols for Large Vehicular Platoons with Prescribed Transient and Steady State Performance

In this paper, we study the longitudinal control problem for a platoon of vehicles with unknown nonlinear dynamics under both the predecessor-following and the bidirectional control architectures. The proposed control protocols are fully distributed in the sense that each vehicle utilizes feedback from its relative position with respect to its preceding and following vehicles as well as its own velocity, which can all be easily obtained by onboard sensors. Moreover, no previous knowledge of model nonlinearities/disturbances is incorporated in the control design, enhancing in that way the robustness of the overall closed loop system against model imperfections. Additionally, certain designer-specified performance functions determine the transient and steady-state response, thus preventing connectivity breaks due to sensor limitations as well as inter-vehicular collisions. Finally, extensive simulation studies and a real-time experiment conducted with mobile robots clarify the proposed control protocols and verify their effectiveness.Comment: IEEE Transactions on Control Systems Technology, accepte

Distributed Control of Multi-agent Systems with Unknown Time-varying Gains: A Novel Indirect Framework for Prescribed Performance

In this paper, a new yet indirect performance guaranteed framework is established to address the distributed tracking control problem for networked uncertain nonlinear strict-feedback systems with unknown time-varying gains under a directed interaction topology. The proposed framework involves two steps: In the first one, a fully distributed robust filter is constructed to estimate the desired trajectory for each agent with guaranteed observation performance that allows the directions among the agents to be non-identical. In the second one, by establishing a novel lemma regarding Nussbaum function, a new adaptive control protocol is developed for each agent based on backstepping technique, which not only steers the output to asymptotically track the corresponding estimated signal with arbitrarily prescribed transient performance, but also largely extends the scope of application since the unknown control gains are allowed to be time-varying and even state-dependent. In such an indirect way, the underlying problem is tackled with the output tracking error converging into an arbitrarily pre-assigned residual set exhibiting an arbitrarily pre-defined convergence rate. Besides, all the internal signals are ensured to be semi-globally ultimately uniformly bounded (SGUUB). Finally, simulation results are provided to illustrate the effectiveness of the co-designed scheme

Asymptotic Tracking Control of Uncertain MIMO Nonlinear Systems with Less Conservative Controllability Conditions

For uncertain multiple inputs multi-outputs (MIMO) nonlinear systems, it is nontrivial to achieve asymptotic tracking, and most existing methods normally demand certain controllability conditions that are rather restrictive or even impractical if unexpected actuator faults are involved. In this note, we present a method capable of achieving zero-error steady-state tracking with less conservative (more practical) controllability condition. By incorporating a novel Nussbaum gain technique and some positive integrable function into the control design, we develop a robust adaptive asymptotic tracking control scheme for the system with time-varying control gain being unknown its magnitude and direction. By resorting to the existence of some feasible auxiliary matrix, the current state-of-art controllability condition is further relaxed, which enlarges the class of systems that can be considered in the proposed control scheme. All the closed-loop signals are ensured to be globally ultimately uniformly bounded. Moreover, such control methodology is further extended to the case involving intermittent actuator faults, with application to robotic systems. Finally, simulation studies are carried out to demonstrate the effectiveness and flexibility of this method

Active Suspension Control of Full-car Systems without Function Approximation

This paper proposes a new control approach for full-car active suspension systems with unknown nonlinearities. The main advantage of this approach is that the uncertainties and nonlinearities in the system can be handled without using any function approximator (e.g., neural networks (NNs), fuzzy logic systems (FLSs)), and the associated online adaptation. Hence, the heavy computational costs and sluggish learning phase to achieve convergence can be remedied. To maintain the transient and steady-state suspension responses, a coordinate suspension error transformation with prescribed performance functions (PPF) is adopted. Then an approximation-free control (AFC) is developed to achieve stabilization of the transformed system so as to retain predefined suspension response. Extreme Value Theorem is used together with Lyapunov theorem to prove the stability and convergence of the closed-loop control system. To validate the proposed method and show its practical applicability, a dynamic simulator is built by using a commercial vehicle software, Carsim, where an E-SUV type vehicle is configured to describe realistic vehicle dynamics. Simulation results reveal that the proposed control can achieve better suspension performance and require less model information compared with some existing approaches

Prescribed Performance Control for Signal Temporal Logic Specifications

Motivated by the recent interest in formal methods-based control for dynamic robots, we discuss the applicability of prescribed performance control to nonlinear systems subject to signal temporal logic specifications. Prescribed performance control imposes a desired transient behavior on the system trajectories that is leveraged to satisfy atomic signal temporal logic specifications. A hybrid control strategy is then used to satisfy a finite set of these atomic specifications. Simulations of a multi-agent system, using consensus dynamics, show that a wide range of specifications, i.e., formation, sequencing, and dispersion, can be robustly satisfied.Comment: 9 pages - this an extended version of the 56th IEEE Conference on Decision and Control (2017) versio