202 research outputs found
Beam scanning by liquid-crystal biasing in a modified SIW structure
A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium
Nanoscale Field Emission Devices for High-Temperature and High-Frequency Operation
Field emission—the quantum-mechanical tunneling of electrons from the surface of a material into vacuum by means of a strong electric field—has been studied for over a century. However, the usage of devices based on this mechanism has been limited to a handful of niche applications such as high-power RF systems and field emission displays. The preference for solid-state devices relies on their low cost, long lifetimes, reduced power consumption, ease of integrability, and simple and scalable fabrication. Nonetheless, with the advent of modern fabrication techniques, it has been possible to build field emission devices with nanoscale dimensions that offer several advantages over traditional semiconductor devices. The use of vacuum allows ballistic transport with no lattice scattering. As device capacitance can be engineered by tuning the geometry, these devices are appealing for high-frequency operation. Vacuum is also inherently immune to harsh operating conditions such as high temperature and radiation, which is desirable for aerospace, nuclear, and military applications. In addition, even though field emission requires substantial electric fields, by exploiting the nanoscale gaps that can be easily fabricated with state-of-the-art lithographic capabilities, we can expect operating voltages comparable to CMOS. Thus, vacuum emission devices have the potential to greatly improve upon the limitations of current technologies.
In this work, we experimentally demonstrate various design paradigms to develop nanoscale field emission devices for high-temperature environments and high-frequency operation. First, we propose suspended lateral two- and four-terminal devices. By removing the underlying solid substrate, we aim to increase the resistance of the leakage current pathways that emerge at elevated temperatures. Tungsten is the chosen electrode material due to its low work function and ability to withstand high temperatures. Our next architecture consists of a multi-tip two-terminal array, which exclusively relies on the inherent fast response of field emission. Due to the strong non-linearity in the emission characteristic, frequency mixing is measured. Lastly, we combine field emission with plasmonics to conceive devices that can be modulated both electrically and optically at telecommunication wavelength. By taking advantage of the strong confinement and significant optical field enhancement of surface plasmon polaritons, we seek to minimize the applied voltages required for field emission as well as the necessary laser powers for photoemission towards the development of high-speed, low-power, nanoscale optoelectronic systems.</p
Efficient wireless coverage of in-building environments with low electromagnetic impact
The city of tomorrow is a major integrating stake, which crosses a set of major broad spectrum domains. One of these areas is the instrumentation of this city and the ubiquity of the exchange of data, which will give the pulse of this city (sensors) and its breathing in a hyper-connected world within indoor and outdoor dense areas (data exchange, 5G and 6G).
Within this context, the proposed doctorate project has the objective to realize cost- and energy- effective, short-range communication systems for the capillary wireless coverage of in-door environments with low electromagnetic impact and for highly dense outdoor networks.
The result will be reached through the combined use of:
1) Radio over Fiber (RoF) Technology, to bring the Radio Frequency (RF) signal to the different areas to be covered.
2) Beamforming antennas to send in real time the RF power just in the direction(s) where it is really necessary
1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface
A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance
Recommended from our members
Silicon Germanium BiCMOS Integrated Circuits for Scalable Cryogenic Sensing Applications
This dissertation is focused on an investigation of BiCMOS cryogenic low noise amplifiers (LNAs) based on Silicon-germanium (SiGe) heterojunction bipolar transistors (HBTs) for simultaneous low noise and low power design and also taking advantage of CMOS circuitry for adding flexibility to the LNA design. Cryogenic LNAs\u27 scalability challenges are discussed and addressed in the dissertation. To achieve that, first, HBTs of three state-of-the-art technologies are characterized and modeled at cryogenic temperature. It is shown that SiGe HBT provides a promising compromise of noise temperature, power consumption, and bandwidth. Moreover, a scalable on-chip approach is proposed and verified for biasing of SiGe HBTs based LNAs. Finally, the first cryogenic re-configurable LNA is designed, implemented, and measured
Applications in Electronics Pervading Industry, Environment and Society
This book features the manuscripts accepted for the Special Issue “Applications in Electronics Pervading Industry, Environment and Society—Sensing Systems and Pervasive Intelligence” of the MDPI journal Sensors. Most of the papers come from a selection of the best papers of the 2019 edition of the “Applications in Electronics Pervading Industry, Environment and Society” (APPLEPIES) Conference, which was held in November 2019. All these papers have been significantly enhanced with novel experimental results. The papers give an overview of the trends in research and development activities concerning the pervasive application of electronics in industry, the environment, and society. The focus of these papers is on cyber physical systems (CPS), with research proposals for new sensor acquisition and ADC (analog to digital converter) methods, high-speed communication systems, cybersecurity, big data management, and data processing including emerging machine learning techniques. Physical implementation aspects are discussed as well as the trade-off found between functional performance and hardware/system costs
A Review of Indoor Millimeter Wave Device-based Localization and Device-free Sensing Technologies and Applications
The commercial availability of low-cost millimeter wave (mmWave)
communication and radar devices is starting to improve the penetration of such
technologies in consumer markets, paving the way for large-scale and dense
deployments in fifth-generation (5G)-and-beyond as well as 6G networks. At the
same time, pervasive mmWave access will enable device localization and
device-free sensing with unprecedented accuracy, especially with respect to
sub-6 GHz commercial-grade devices. This paper surveys the state of the art in
device-based localization and device-free sensing using mmWave communication
and radar devices, with a focus on indoor deployments. We first overview key
concepts about mmWave signal propagation and system design. Then, we provide a
detailed account of approaches and algorithms for localization and sensing
enabled by mmWaves. We consider several dimensions in our analysis, including
the main objectives, techniques, and performance of each work, whether each
research reached some degree of implementation, and which hardware platforms
were used for this purpose. We conclude by discussing that better algorithms
for consumer-grade devices, data fusion methods for dense deployments, as well
as an educated application of machine learning methods are promising, relevant
and timely research directions.Comment: 43 pages, 13 figures. Accepted in IEEE Communications Surveys &
Tutorials (IEEE COMST
Linear and Spectrally Agile Integrated Microwave Photonic Devices and Subsystems
The goal of this research is to advance analog photonic communication systems through three major efforts: 1) to develop high performance microwave photonic filters, 2) to intrinsically linearize the integrated photonic component that contributes most to nonlinearities, i.e. the photonic modulator, and 3) to demonstrate microwave frequency tunable functions using integrated photonic platforms, e.g. frequency conversion. The first effort addresses a major need for microwave photonics, namely few-GHz or less optical filters. The second effort enhances the performance of current integrated modulators to achieve metrics suitable for demanding applications in defense, cellular fronthaul networks, and traditional telecom. The third effort provides necessary groundwork to enable the commercialization or implementation of next generation communication systems while advancing the understanding of such complex microwave photonic systems. The demonstration of microwave frequency tunable (“spectrally agile”) architectures includes the design, simulation, characterization, and intuitive understanding of such systems.
Overall, this work addresses current and future needs in microwave photonics related industries by investigating both device-level and system-level solutions to achieve greater performance using integrated photonic technologies.Ph.D
Designing of 8-Gate Fingered GaN HEMT based Frequency Mixer with Enhanced Gain for Wide Band Communication Systems
The reconfigurable mixer plays an important role in both transmitter as well as receiver section in the present wireless and digital communication systems. Also such mixer requires lot of power for up-converting and down-converting the signal without any noise. This paper deals about such type of designing of reconfigurable mixer for wide band communication applications with Gallium Nitride High Electron Mobility Transistor (GaN HEMT). This GaN HEMT transistor solves the requirement of huge power over wide range without any noise. The mixer is designed in the present paper for variable gain conversion along with power consumption trade-off for a wide range of frequency (2–8 GHz) with reconfigurable concept. Applied Wave Research (AWR) simulator was used to design the reconfigurable mixer. The gain is controlled by changing the trans-conductance of the input RF stage, and the current steering in trans-impedance stage. A broadband down-converter mixer is designed that provide different conversion gain, ranging from 25–33.5 dB with two different modes. The large bandwidth of the mixer is achieved by shunting the trans-conductance stage and with various switching stages. The results also show that there is good isolation along with conversion gain of designed reconfigurable mixer, for wide range in various communication applications
Forum Bildverarbeitung 2020
Image processing plays a key role for fast and contact-free data acquisition in many technical areas, e.g., in quality control or robotics. These conference proceedings of the “Forum Bildverarbeitung”, which took place on 26.-27.11.202 in Karlsruhe as a common event of the Karlsruhe Institute of Technology and the Fraunhofer Institute of Optronics, System Technologies and Image Exploitation, contain the articles of the contributions
- …