Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.Siirretty Doriast

A novel low-swing voltage driver design and the analysis of its robustness to the effects of process variation and external disturbances

arket forces are continually demanding devices with increased functionality/unit area; these demands have been satisfied through aggressive technology scaling which, unfortunately, has impacted adversely on the global interconnect delay subsequently reducing system performance. Line drivers have been used to mitigate the problems with delay; however, these have a large power consumption. A solution to reducing the power dissipation of the drivers is to use lower supply voltages. However, by adopting a lower power supply voltage, the performance of the line drivers for global interconnects is impaired unless low-swing signalling techniques are implemented. Low-swing signalling techniques can provide high speed signalling with low power consumption and hence can be used to drive global on-chip interconnect. Most of the proposed low-swing signalling schemes are immune to noise as they have a good SNR. However, they tend to have a large penalty in area and complexity as they require additional circuitry such as voltage generators and low-Vth devices. Most of the schemes also incorporate multiple Vdd and reference voltages which increase the overall circuit complexity. A diode-connected driver circuit has the best attributes over other low-swing signalling techniques in terms of low power, low delay, good SNR and low area overhead. By incorporating a diode-connected configuration at the output, it can provide high speed signalling due to its high driving capability. However, this configuration also has its limitations as it has issues with its adaptability to process variations, as well as an issue with leakage currents. To address these limitations, two novel driver schemes have been designed, namely, nLVSD and mLVSD, which, additionally, have improvements in performance and power consumption. Comparisons between the proposed schemes with the existing diode-connected driver circuits (MJ and DDC) showed that the nLVSD and mLVSD drivers have approximately 46% and 50% less delay. The name MJ originates from the driver’s designer called Juan A. Montiel-Nelson, while DDC stands for dynamic diode-connected. In terms of power consumption, the nLVSD and mLVSD drivers also produce 43% and 7% improvement. Additionally, the mLVSD driver scheme is the most robust as its SNR is 14 to 44% higher compared to other diode-connected driver circuits. On the other hand, the nLVSD driver has 6% lower SNR compared to the MJ driver, even though it is 19% more robust than the DDC driver. However, since its SNR is still above 1, its improved performance and reduced power consumption, as well other advantages it has over other diode-connected driver circuits can compensate for this limitation. Regarding the robustness to external disturbances, the proposedmdriver circuits are more robust to crosstalk effects as the nLVSD and mLVSD drivers are approximately 35% and 7% more robust than other diode-connected drivers. Furthermore, the mLVSD driver is 5%, 33% and 47% more tolerant to SEUs compared to the nLVSD, MJ and DDC driver circuits respectively, whilst the MJ and DDC drivers are 26% and 40% less tolerant to SEUs iii compared to the nLVSD circuit. A comparison between the four schemes was also undertaken in the presence of ±3σ process and voltage (PV) variations. The analysis indicated that both proposed driver schemes are more robust than other diode-connected driver schemes, namely, the MJ and DDC driver circuits. The MJ driver scheme deviates approximately 18% and 35% more in delay and power consumption compared to the proposed schemes. The DDC driver has approximately 20% and 57% more variations in delay and power consumption in comparison to the proposed schemes. In order to further improve the robustness of the proposed driver circuits against process variation and environmental disturbances, they were further analysed to identify which process variables had the most impact on circuit delay and power consumption, as well as identifying several design techniques to mitigate problems with environmental disturbances. The most significant process parameters to have impact on circuit delay and power consumption were identified to be Vdd, tox, Vth, s, w and t. The impact of SEUs on the circuit can be reduced by increasing the bias currents whilst design methods such as increasing the interconnect spacing can help improve the circuit robustness against crosstalk. Overall it is considered that the proposed nLVSD and mLVSD circuits advance the state of the art in driver design for on-chip signalling applications.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Analytic Delay Model of RLC Interconnects using Numerical Inversion of the Laplace Transform

Signal integrity analysis for on-chip interconnect becomes increasingly important in high-speed designs. SPICE, a conventional circuit simulator, can provide accurate prediction for interconnects, however, using SPICE is extremely computationally expensive. On the other hand, explicit moment matching technique can produce unstable poles for highly accurate approximations and implicit moment matching technique can obtain more accurate approximations at the expense of computational complexity. This thesis presents an analytic model to efficiently estimate the signal delays of RLC on-chip interconnects. It uses the numerical inversion of Laplace transform (NILT) to obtain time function, suitable for transient analysis. Since the integration formula of the NILT is numerically stable for higher order approximations, the developed algorithm provides a mechanism to increase the accuracy for delay estimation. Numerical examples are implemented and compared with HSPICE, two-pole model and Passive Reduced-Order Interconnect Macromodeling Algorithm (PRIMA) to illustrate the efficiency and validity of the proposed work

Modelling and Test Generation for Crosstalk Faults in DSM Chips

In the era of deep submicron technology (DSM), many System-on-Chip (SoC) applications require the components to be operating at high clock speeds. With the shrinking feature size and ever increasing clock frequencies, the DSM technology has led to a well-known problem of Signal Integrity (SI) more especially in the connecting layout design. The increasing aspect ratios of metal wires and also the ratio of coupling capacitance over substrate capacitance result in electrical coupling of interconnects which leads to crosstalk problems. In this thesis, first the work carried out to model the crosstalk behaviour between aggressor and victim by considering the distributed RLGC parameters of interconnect and the coupling capacitance and mutual conductance between the two nets is presented. The proposed model also considers the RC linear models of the CMOS drivers and receivers. The behaviour of crosstalk in case of under etching problem has been studied and modelled by distributing and approximating the defect behaviour throughout the nets. Next, the proposed model has also been extended to model the behaviour of crosstalk in case of one victim is influenced by several aggressors by considering all aggressors have similar effect (worst-case) on victim. In all the above cases simulation experiments were also carried out and compared with well-known circuit simulation tool PSPICE. It has been proved that the generated crosstalk model is faster and the results generated are within 10% of error margin compared to latter simulation tool. Because of the accuracy and speed of the proposed model, the model is very useful for both SoC designers and test engineers to analyse the crosstalk behaviour. Each manufactured device needs to be tested thoroughly to ensure the functionality before its delivery. The test pattern generation for crosstalk faults is also necessary to test the corresponding crosstalk faults. In this thesis, the well-known PODEM algorithm for stuck-at faults is extended to generate the test patterns for crosstalk faults between single aggressor and single victim. To apply modified PODEM for crosstalk faults, the transition behaviour has been divided into two logic parts as before transition and after transition. After finding individually required test patterns for before transition and after transition, the generated logic vectors are appended to create transition test patterns for crosstalk faults. The developed algorithm is also applied for a few ISCAS 85 benchmark circuits and the fault coverage is found excellent in most circuits. With the incorporation of proposed algorithm into the ATPG tools, the efficiency of testing will be improved by generating the test patterns for crosstalk faults besides for the conventional stuck-at faults. In generating test patterns for crosstalk faults on single victim due to multiple aggressors, the modified PODEM algorithm is found to be more time consuming. The search capability of Genetic Algorithms in finding the required combination of several input factors for any optimized problem fascinated to apply GA for generating test patterns as generating the test pattern is also similar to finding the required vector out of several input transitions. Initially the GA is applied for generating test patterns for stuck-at faults and compared the results with PODEM algorithm. As the fault coverage is almost similar to the deterministic algorithm PODEM, the GA developed for stuck-at faults is extended to find test patterns for crosstalk faults between single aggressor and single victim. The elitist GA is also applied for a few ISCAS 85 benchmark circuits. Later the algorithm is extended to generate test patterns for worst-case crosstalk faults. It has been proved that elitist GA developed in this thesis is also very useful in generating test patterns for crosstalk faults especially for multiple aggressor and single victim crosstalk faults

Développement d'architectures HW/SW tolérantes aux fautes et auto-calibrantes pour les technologies Intégrées 3D

Malgré les avantages de l'intégration 3D, le test, le rendement et la fiabilité des Through-Silicon-Vias (TSVs) restent parmi les plus grands défis pour les systèmes 3D à base de Réseaux-sur-Puce (Network-on-Chip - NoC). Dans cette thèse, une stratégie de test hors-ligne a été proposé pour les interconnections TSV des liens inter-die des NoCs 3D. Pour le TSV Interconnect Built-In Self-Test (TSV-IBIST) on propose une nouvelle stratégie pour générer des vecteurs de test qui permet la détection des fautes structuraux (open et short) et paramétriques (fautes de délaye). Des stratégies de correction des fautes transitoires et permanents sur les TSV sont aussi proposées aux plusieurs niveaux d'abstraction: data link et network. Au niveau data link, des techniques qui utilisent des codes de correction (ECC) et retransmission sont utilisées pour protégé les liens verticales. Des codes de correction sont aussi utilisés pour la protection au niveau network. Les défauts de fabrication ou vieillissement des TSVs sont réparé au niveau data link avec des stratégies à base de redondance et sérialisation. Dans le réseau, les liens inter-die défaillante ne sont pas utilisables et un algorithme de routage tolérant aux fautes est proposé. On peut implémenter des techniques de tolérance aux fautes sur plusieurs niveaux. Les résultats ont montré qu'une stratégie multi-level atteint des très hauts niveaux de fiabilité avec un cout plus bas. Malheureusement, il n'y as pas une solution unique et chaque stratégie a ses avantages et limitations. C'est très difficile d'évaluer tôt dans le design flow les couts et l'impact sur la performance. Donc, une méthodologie d'exploration de la résilience aux fautes est proposée pour les NoC 3D mesh.3D technology promises energy-efficient heterogeneous integrated systems, which may open the way to thousands cores chips. Silicon dies containing processing elements are stacked and connected by vertical wires called Through-Silicon-Vias. In 3D chips, interconnecting an increasing number of processing elements requires a scalable high-performance interconnect solution: the 3D Network-on-Chip. Despite the advantages of 3D integration, testing, reliability and yield remain the major challenges for 3D NoC-based systems. In this thesis, the TSV interconnect test issue is addressed by an off-line Interconnect Built-In Self-Test (IBIST) strategy that detects both structural (i.e. opens, shorts) and parametric faults (i.e. delays and delay due to crosstalk). The IBIST circuitry implements a novel algorithm based on the aggressor-victim scenario and alleviates limitations of existing strategies. The proposed Kth-aggressor fault (KAF) model assumes that the aggressors of a victim TSV are neighboring wires within a distance given by the aggressor order K. Using this model, TSV interconnect tests of inter-die 3D NoC links may be performed for different aggressor order, reducing test times and circuitry complexity. In 3D NoCs, TSV permanent and transient faults can be mitigated at different abstraction levels. In this thesis, several error resilience schemes are proposed at data link and network levels. For transient faults, 3D NoC links can be protected using error correction codes (ECC) and retransmission schemes using error detection (Automatic Retransmission Query) and correction codes (i.e. Hybrid error correction and retransmission).For transients along a source-destination path, ECC codes can be implemented at network level (i.e. Network-level Forward Error Correction). Data link solutions also include TSV repair schemes for faults due to fabrication processes (i.e. TSV-Spare-and-Replace and Configurable Serial Links) and aging (i.e. Interconnect Built-In Self-Repair and Adaptive Serialization) defects. At network-level, the faulty inter-die links of 3D mesh NoCs are repaired by implementing a TSV fault-tolerant routing algorithm. Although single-level solutions can achieve the desired yield / reliability targets, error mitigation can be realized by a combination of approaches at several abstraction levels. To this end, multi-level error resilience strategies have been proposed. Experimental results show that there are cases where this multi-layer strategy pays-off both in terms of cost and performance. Unfortunately, one-fits-all solution does not exist, as each strategy has its advantages and limitations. For system designers, it is very difficult to assess early in the design stages the costs and the impact on performance of error resilience. Therefore, an error resilience exploration (ERX) methodology is proposed for 3D NoCs.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

3D-SoftChip: A novel 3D vertically integrated adaptive computing system [thesis]

At present, as we enter the nano and giga-scaled integrated-circuit era, there are many system design challenges which must be overcome to resolve problems in current systems. The incredibly increased nonrecurring engineering (NRE) cost, abruptly shortened Time-to- Market (ITA) period and ever widening design productive gaps are good examples illustrating the problems in current systems. To cope with these problems, the concept of an Adaptive Computing System is becoming a critical technology for next generation computing systems. The other big problem is an explosion in the interconnection wire requirements in standard planar technology resulting from the very high data-bandwidth requirements demanded for real-time communications and multimedia signal processing. The concept of 3D-vertical integration of 2D planar chips becomes an attractive solution to combat the ever increasing interconnect wire requirements. As a result, this research proposes the concept of a novel 3D integrated adaptive computing system, which we term 3D-ACSoC. The architecture and advanced system design methodology of the proposed 3D-SoftChip as a forthcoming giga-scaled integrated circuit computing system has been introduced, along with high-level system modeling and functional verification in the early design stage using SystemC