A linear group polynomial-expansion successive interference cancellation detector

In this work, we consider a linear group polynomial expansion successive interference cancellation (GPE-SIC) detector in a synchronous CDMA system. It is a hybrid detector, which combines parallel and successive cancellation techniques in order to extract the advantages of both of the schemes. Benefiting from the fact that even if the cross-correlation matrix of the system is not diagonal-dominant, we can force the cross-correlation matrix of users within the same group to be diagonal-dominant by suitable grouping and approximate the decorrelator/MMSE detector by a low-complexity polynomial expansion detector. This approximation is very accurate if the cross-correlation matrix of users within the same group is diagonal-dominant. Simulation results showed that the (GPE-SIC) detector has the same performance as the linear group decorrelator successive interference cancellation (GDEC-SIC) detector but with lower computational complexity

Asynchronous CDMA Systems with Random Spreading-Part II: Design Criteria

Totally asynchronous code-division multiple-access (CDMA) systems are addressed. In Part I, the fundamental limits of asynchronous CDMA systems are analyzed in terms of spectral efficiency and SINR at the output of the optimum linear detector. The focus of Part II is the design of low-complexity implementations of linear multiuser detectors in systems with many users that admit a multistage representation, e.g. reduced rank multistage Wiener filters, polynomial expansion detectors, weighted linear parallel interference cancellers. The effects of excess bandwidth, chip-pulse shaping, and time delay distribution on CDMA with suboptimum linear receiver structures are investigated. Recursive expressions for universal weight design are given. The performance in terms of SINR is derived in the large-system limit and the performance improvement over synchronous systems is quantified. The considerations distinguish between two ways of forming discrete-time statistics: chip-matched filtering and oversampling

Fast Decoder for Overloaded Uniquely Decodable Synchronous Optical CDMA

In this paper, we propose a fast decoder algorithm for uniquely decodable (errorless) code sets for overloaded synchronous optical code-division multiple-access (O-CDMA) systems. The proposed decoder is designed in a such a way that the users can uniquely recover the information bits with a very simple decoder, which uses only a few comparisons. Compared to maximum-likelihood (ML) decoder, which has a high computational complexity for even moderate code lengths, the proposed decoder has much lower computational complexity. Simulation results in terms of bit error rate (BER) demonstrate that the performance of the proposed decoder for a given BER requires only 1-2 dB higher signal-to-noise ratio (SNR) than the ML decoder.Comment: arXiv admin note: substantial text overlap with arXiv:1806.0395

Performance comparison of multi-user detectors for the downlink of a broadband MC-CDMA system

In this paper multi-user detection techniques, such as Parallel and Serial Interference Cancellations (PIC & SIC), General Minimum Mean Square Error (GMMSE) and polynomial MMSE, for the downlink of a broadband Multi-Carrier Code Division Multiple Access (MCCDMA) system are investigated. The Bit Error Rate (BER) and Frame Error Rate (FER) results are evaluated, and compared with single-user detection (MMSEC, EGC) approaches, as well. The performance evaluation takes into account the system load, channel coding and modulation schemes

Transmission and detection for space-time block coding and v-blast systems

This dissertation focuses on topics of data transmission and detection of space -time block codes (STBC). The STBCs can be divided into two main categories, namely, the orthogonal space-time block codes (OSTBC) and the quasi-orthogonal space-time codes (Q-OSTBC). The space-time block coded systems from transceiver design perspective for both narrow-band and frequency selective wireless environment are studied. The dissertation also processes and studies a fast iterative detection scheme for a high-rate space-time transmission system, the V-BLAST system. In Chapter 2, a new OSTBC scheme with full-rate and full-diversity, which can be used on QPSK transceiver systems with four transmit antennas and any number of receivers is studied. The newly proposed coding scheme is a non-linear coding. Compared with full-diversity QOSTBC, an obvious advantage of our proposed new OSTBC is that the coded signals transmitted through all four transmit antennas do not experience any constellation expansion. In Chapter 3, a new fast coherent detection algorithm is proposed to provide maximum likelihood (ML) detection for Q-OSTBC. The new detection scheme is also very useful to analysis the diversity property of Q-OSTBC and design full diversity Q-OSTBC codes. The complexity of the new proposed detection algorithm can be independent to the modulation order and is especially suitable for high data rate transmission. In Chapter 4, the space-time coding schemes in frequency selective channels are studied. Q-OSTC transmission and detection schemes are firstly extended for frequency selective wireless environment. A new block based quasi-orthogonal space-time block encoding and decoding (Q-OSTBC) scheme for a wireless system with four transmit antennas is proposed in frequency selective fading channels. The proposed MLSE detection scheme effectively combats channel dispersion and frequency selectivity due to multipath, yet still provides full diversity gain. However, since the computational complexity of MLSE detection increases exponentially with the maximum delay of the frequency selective channel, a fast sub-optimal detection scheme using MMSE equalizer is also proposed, especially for channels with large delays. The Chapter 5 focuses on the V-BLAST system, an important high-rate space-time data transmission scheme. A reduced complexity ML detection scheme for VBLAST systems, which uses a pre-decoder guided local exhaustive search is proposed and studied. A polygon searching algorithm and an ordered successive interference cancellation (O-SIC) sphere searching algorithm are major components of the proposed multi-step ML detectors. At reasonable high SNRs, our algorithms have low complexity comparable to that of O-SIC algorithm, while they provide significant performance improvement. Another new low complexity algorithm termed ordered group-wise interference cancellation (O-GIC) is also proposed for the detection of high dimensional V-BLAST systems. The O-GIC based detection scheme is a sub-optimal detection scheme, however, it outperforms the O-SIC

Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions

Massive MIMO is a compelling wireless access concept that relies on the use of an excess number of base-station antennas, relative to the number of active terminals. This technology is a main component of 5G New Radio (NR) and addresses all important requirements of future wireless standards: a great capacity increase, the support of many simultaneous users, and improvement in energy efficiency. Massive MIMO requires the simultaneous processing of signals from many antenna chains, and computational operations on large matrices. The complexity of the digital processing has been viewed as a fundamental obstacle to the feasibility of Massive MIMO in the past. Recent advances on system-algorithm-hardware co-design have led to extremely energy-efficient implementations. These exploit opportunities in deeply-scaled silicon technologies and perform partly distributed processing to cope with the bottlenecks encountered in the interconnection of many signals. For example, prototype ASIC implementations have demonstrated zero-forcing precoding in real time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing of 8 terminals). Coarse and even error-prone digital processing in the antenna paths permits a reduction of consumption with a factor of 2 to 5. This article summarizes the fundamental technical contributions to efficient digital signal processing for Massive MIMO. The opportunities and constraints on operating on low-complexity RF and analog hardware chains are clarified. It illustrates how terminals can benefit from improved energy efficiency. The status of technology and real-life prototypes discussed. Open challenges and directions for future research are suggested.Comment: submitted to IEEE transactions on signal processin

A Primer on MIMO Detection Algorithms for 5G Communication Network

In the recent past, demand for large use of mobile data has increased tremendously due to the proliferation of hand held devices which allows millions of people access to video streaming, VOIP and other internet related usage including machine to machine (M2M) communication. One of the anticipated attribute of the fifth generation (5G) network is its ability to meet this humongous data rate requirement in the order of 10s Gbps. A particular promising technology that can provide this desired performance if used in the 5G network is the massive multiple-input, multiple-output otherwise called the Massive MIMO. The use of massive MIMO in 5G cellular network where data rate of the order of 100x that of the current state of the art LTE-A is expected and high spectral efficiency with very low latency and low energy consumption, present a challenge in symbol/signal detection and parameter estimation as a result of the high dimension of the antenna elements required. One of the major bottlenecks in achieving the benefits of such massive MIMO systems is the problem of achieving detectors with realistic low complexity for such huge systems. We therefore review various MIMO detection algorithms aiming for low computational complexity with high performance and that scales well with increase in transmit antennas suitable for massive MIMO systems. We evaluate detection algorithms for small and medium dimension MIMO as well as a combination of some of them in order to achieve our above objectives. The review shows no single one detector can be said to be ideal for massive MIMO and that the low complexity with optimal performance detector suitable for 5G massive MIMO system is still an open research issue. A comprehensive review of such detection algorithms for massive MIMO was not presented in the literature which was achieved in this work

Globally Optimal Energy-Efficient Power Control and Receiver Design in Wireless Networks

The characterization of the global maximum of energy efficiency (EE) problems in wireless networks is a challenging problem due to the non-convex nature of investigated problems in interference channels. The aim of this work is to develop a new and general framework to achieve globally optimal solutions. First, the hidden monotonic structure of the most common EE maximization problems is exploited jointly with fractional programming theory to obtain globally optimal solutions with exponential complexity in the number of network links. To overcome this issue, we also propose a framework to compute suboptimal power control strategies characterized by affordable complexity. This is achieved by merging fractional programming and sequential optimization. The proposed monotonic framework is used to shed light on the ultimate performance of wireless networks in terms of EE and also to benchmark the performance of the lower-complexity framework based on sequential programming. Numerical evidence is provided to show that the sequential fractional programming framework achieves global optimality in several practical communication scenarios.Comment: Accepted for publication in the IEEE Transactions on Signal Processin