Exoskeletons for workers: A case series study in an enclosures production line

This case-series study aims to investigate the effects of a passive shoulder support exoskeleton on experienced workers during their regular work shifts in an enclosures production site. Experimental activities included three sessions, two of which were conducted in-field (namely, at two workstations of the painting line, where panels were mounted and dismounted from the line; each session involved three participants), and one session was carried out in a realistic simulated environment (namely, the workstations were recreated in a laboratory; this session involved four participants). The effect of the exoskeleton was evaluated through electromyographic activity and perceived effort. After in-field sessions, device usability and user acceptance were also assessed. Data were reported individually for each participant. Results showed that the use of the exoskeleton reduced the total shoulder muscular activity compared to normal working conditions, in all subjects and experimental sessions. Similarly, the use of the exoskeleton resulted in reductions of the perceived effort in the shoulder, arm, and lower back. Overall, participants indicated high usability and acceptance of the device. This case series invites larger validation studies, also in diverse operational contexts

Computational Synthesis of Wearable Robot Mechanisms: Application to Hip-Joint Mechanisms

Since wearable linkage mechanisms could control the moment transmission from actuator(s) to wearers, they can help ensure that even low-cost wearable systems provide advanced functionality tailored to users' needs. For example, if a hip mechanism transforms an input torque into a spatially-varying moment, a wearer can get effective assistance both in the sagittal and frontal planes during walking, even with an affordable single-actuator system. However, due to the combinatorial nature of the linkage mechanism design space, the topologies of such nonlinear-moment-generating mechanisms are challenging to determine, even with significant computational resources and numerical data. Furthermore, on-premise production development and interactive design are nearly impossible in conventional synthesis approaches. Here, we propose an innovative autonomous computational approach for synthesizing such wearable robot mechanisms, eliminating the need for exhaustive searches or numerous data sets. Our method transforms the synthesis problem into a gradient-based optimization problem with sophisticated objective and constraint functions while ensuring the desired degree of freedom, range of motion, and force transmission characteristics. To generate arbitrary mechanism topologies and dimensions, we employed a unified ground model. By applying the proposed method for the design of hip joint mechanisms, the topologies and dimensions of non-series-type hip joint mechanisms were obtained. Biomechanical simulations validated its multi-moment assistance capability, and its wearability was verified via prototype fabrication. The proposed design strategy can open a new way to design various wearable robot mechanisms, such as shoulders, knees, and ankles.Comment: 28 pages, 7 figures, Supplementary Material

A hand exoskeleton with series elastic actuation for rehabilitation : design, control and experimentation

Rehabilitation of the hands is critical for restoring independence in activities of daily living for individuals with upper extremity disabilities. Conventional therapies for hand rehabilitation have not shown significant improvement in hand function. Robotic exoskeletons have been developed to assist in therapy and there is initial evidence that such devices with force-control based strategies can help in effective rehabilitation of human limbs. However, to the best of our knowledge, none of the existing hand exoskeletons allow for accurate force or torque control. In this dissertation, we design and prototype a novel hand exoskeleton that has the following unique features: (i) Bowden-cable-based series elastic actuation allowing for bidirectional torque control of each joint individually, (ii) an underlying kinematic mechanism that is optimized to achieve large range of motion and (iii) a thumb module that allows for independent actuation of the four thumb joints. To control the developed hand exoskeleton for efficacious rehabilitation after a neuromuscular impairment such as stroke, we present two types of subject-specific assist-as-needed controllers. Learned force-field control is a novel control technique in which a neural-network-based model of the required torques given the joint angles for a specific subject is learned and then used to build a force-field to assist the joint motion of the subject to follow a trajectory designed in the joint-angle space. Adaptive assist-as-needed control, on the other hand, estimates the coupled digit-exoskeleton system torque requirement of a subject using radial basis function (RBF) and on-the-y adapts the RBF magnitudes to provide a feed-forward assistance for improved trajectory tracking. Experiments with healthy human subjects showed that each controller has its own trade-offs and is suitable for a specific type of impairment. Finally, to promote and optimize motor (re)-learning, we present a framework for robot-assisted motor (re)-learning that provides subject-specific training by allowing for simultaneous adaptation of task, assistance and feedback based on the performance of the subject on the task. To train the subjects for dexterous manipulation, we present a torque-based task that requires subjects to dynamically regulate their joint torques. A pilot study carried out with healthy human subjects using the developed hand exoskeleton suggests that training under simultaneous adaptation of task, assistance and feedback can module challenge and affect their motor learning.Mechanical Engineerin

Proceedings of the ECCOMAS Thematic Conference on Multibody Dynamics 2015

This volume contains the full papers accepted for presentation at the ECCOMAS Thematic Conference on Multibody Dynamics 2015 held in the Barcelona School of Industrial Engineering, Universitat Politècnica de Catalunya, on June 29 - July 2, 2015. The ECCOMAS Thematic Conference on Multibody Dynamics is an international meeting held once every two years in a European country. Continuing the very successful series of past conferences that have been organized in Lisbon (2003), Madrid (2005), Milan (2007), Warsaw (2009), Brussels (2011) and Zagreb (2013); this edition will once again serve as a meeting point for the international researchers, scientists and experts from academia, research laboratories and industry working in the area of multibody dynamics. Applications are related to many fields of contemporary engineering, such as vehicle and railway systems, aeronautical and space vehicles, robotic manipulators, mechatronic and autonomous systems, smart structures, biomechanical systems and nanotechnologies. The topics of the conference include, but are not restricted to: ● Formulations and Numerical Methods ● Efficient Methods and Real-Time Applications ● Flexible Multibody Dynamics ● Contact Dynamics and Constraints ● Multiphysics and Coupled Problems ● Control and Optimization ● Software Development and Computer Technology ● Aerospace and Maritime Applications ● Biomechanics ● Railroad Vehicle Dynamics ● Road Vehicle Dynamics ● Robotics ● Benchmark ProblemsPostprint (published version