Parallel algorithms and architectures for low power video decoding

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.Cataloged from PDF version of thesis.Includes bibliographical references (p. 197-204).Parallelism coupled with voltage scaling is an effective approach to achieve high processing performance with low power consumption. This thesis presents parallel architectures and algorithms designed to deliver the power and performance required for current and next generation video coding. Coding efficiency, area cost and scalability are also addressed. First, a low power video decoder is presented for the current state-of-the-art video coding standard H.264/AVC. Parallel architectures are used along with voltage scaling to deliver high definition (HD) decoding at low power levels. Additional architectural optimizations such as reducing memory accesses and multiple frequency/voltage domains are also described. An H.264/AVC Baseline decoder test chip was fabricated in 65-nm CMOS. It can operate at 0.7 V for HD (720p, 30 fps) video decoding and with a measured power of 1.8 mW. The highly scalable decoder can tradeoff power and performance across >100x range. Second, this thesis demonstrates how serial algorithms, such as Context-based Adaptive Binary Arithmetic Coding (CABAC), can be redesigned for parallel architectures to enable high throughput with low coding efficiency cost. A parallel algorithm called the Massively Parallel CABAC (MP-CABAC) is presented that uses syntax element partitions and interleaved entropy slices to achieve better throughput-coding efficiency and throughput-area tradeoffs than H.264/AVC. The parallel algorithm also improves scalability by providing a third dimension to tradeoff coding efficiency for power and performance. Finally, joint algorithm-architecture optimizations are used to increase performance and reduce area with almost no coding penalty. The MP-CABAC is mapped to a highly parallel architecture with 80 parallel engines, which together delivers >10x higher throughput than existing H.264/AVC CABAC implementations. A MP-CABAC test chip was fabricated in 65-nm CMOS to demonstrate the power-performance-coding efficiency tradeoff.by Vivienne. Sze.Ph.D

Scalability of parallel video decoding on heterogeneous manycore architectures

This paper presents an analysis of the scalability of the parallel video decoding on heterogeneous many core architectures. As benchmark, we use a highly parallel H.264/AVC video decoder that generates a large number of independent tasks. In order to translate task-level parallelism into performance gains both the video decoder and the architecture have been optimized. The video decoder was modified for exploiting coarse-grain frame-level parallelism in the entropy decoding kernel which has been considered the main bottleneck. Second, a heterogeneous combination of cores is evaluated for executing different type of tasks. Finally, an evaluation of the memory requirements of the whole system has been carried out. Experiments conducted using a trace-driven simulation methodology shows that the evaluated system exhibits a good parallel scalability up to 68 cores. At this point the parallel video decoder is able to decode more than 200 HD frames per second using simple low power processors.Postprint (published version

Joint Algorithm-Architecture Optimization of CABAC

This paper uses joint algorithm and architecture design to enable high coding efficiency in conjunction with high processing speed and low area cost. Specifically, it presents several optimizations that can be performed on Context Adaptive Binary Arithmetic Coding (CABAC), a form of entropy coding used in H.264/AVC, to achieve the throughput necessary for real-time low power high definition video coding. The combination of syntax element partitions and interleaved entropy slices, referred to as Massively Parallel CABAC, increases the number of binary symbols that can be processed in a cycle. Subinterval reordering is used to reduce the cycle time required to process each binary symbol. Under common conditions using the JM12.0 software, the Massively Parallel CABAC, increases the bins per cycle by 2.7 to 32.8× at a cost of 0.25 to 6.84% coding loss compared with sequential single slice H.264/AVC CABAC. It also provides a 2× reduction in area cost, and reduces memory bandwidth. Subinterval reordering reduces the critical path delay by 14 to 22%, while modifications to context selection reduces the memory requirement by 67%. This work demonstrates that accounting for implementation cost during video coding algorithms design can enable higher processing speed and reduce hardware cost, while still delivering high coding efficiency in the next generation video coding standard.Texas Instruments Incorporated (Graduate Women's Fellowship for Leadership in Microelectronics)Natural Sciences and Engineering Research Council of Canad

Application-Specific Cache and Prefetching for HEVC CABAC Decoding

Context-based Adaptive Binary Arithmetic Coding (CABAC) is the entropy coding module in the HEVC/H.265 video coding standard. As in its predecessor, H.264/AVC, CABAC is a well-known throughput bottleneck due to its strong data dependencies. Besides other optimizations, the replacement of the context model memory by a smaller cache has been proposed for hardware decoders, resulting in an improved clock frequency. However, the effect of potential cache misses has not been properly evaluated. This work fills the gap by performing an extensive evaluation of different cache configurations. Furthermore, it demonstrates that application-specific context model prefetching can effectively reduce the miss rate and increase the overall performance. The best results are achieved with two cache lines consisting of four or eight context models. The 2 × 8 cache allows a performance improvement of 13.2 percent to 16.7 percent compared to a non-cached decoder due to a 17 percent higher clock frequency and highly effective prefetching. The proposed HEVC/H.265 CABAC decoder allows the decoding of high-quality Full HD videos in real-time using few hardware resources on a low-power FPGA.EC/H2020/645500/EU/Improving European VoD Creative Industry with High Efficiency Video Delivery/Film26

A Deeply Pipelined CABAC Decoder for HEVC Supporting Level 6.2 High-tier Applications

High Efficiency Video Coding (HEVC) is the latest video coding standard that specifies video resolutions up to 8K Ultra-HD (UHD) at 120 fps to support the next decade of video applications. This results in high-throughput requirements for the context adaptive binary arithmetic coding (CABAC) entropy decoder, which was already a well-known bottleneck in H.264/AVC. To address the throughput challenges, several modifications were made to CABAC during the standardization of HEVC. This work leverages these improvements in the design of a high-throughput HEVC CABAC decoder. It also supports the high-level parallel processing tools introduced by HEVC, including tile and wavefront parallel processing. The proposed design uses a deeply pipelined architecture to achieve a high clock rate. Additional techniques such as the state prefetch logic, latched-based context memory, and separate finite state machines are applied to minimize stall cycles, while multibypass- bin decoding is used to further increase the throughput. The design is implemented in an IBM 45nm SOI process. After place-and-route, its operating frequency reaches 1.6 GHz. The corresponding throughputs achieve up to 1696 and 2314 Mbin/s under common and theoretical worst-case test conditions, respectively. The results show that the design is sufficient to decode in real-time high-tier video bitstreams at level 6.2 (8K UHD at 120 fps), or main-tier bitstreams at level 5.1 (4K UHD at 60 fps) for applications requiring sub-frame latency, such as video conferencing

A QHD-capable parallel H.264 decoder

Video coding follows the trend of demanding higher performance every new generation, and therefore could utilize many-cores. A complete parallelization of H.264, which is the most advanced video coding standard, was found to be difficult due to the complexity of the standard. In this paper a parallel implementation of a complete H.264 decoder is presented. Our parallelization strategy exploits function-level as well as data-level parallelism. Function-level parallelism is used to pipeline the H.264 decoding stages. Data-level parallelism is exploited within the two most time consuming stages, the entropy decoding stage and the macroblock decoding stage. The parallelization strategy has been implemented and optimized on three platforms with very different memory architectures, namely an 8-core SMP, a 64-core cc-NUMA, and an 18-core Cell platform. Evaluations have been performed using 4kx2k QHD sequences. On the SMP platform a maximum speedup of 4.5x is achieved. The SMP-implementation is reasonably performance portable as it achieves a speedup of 26.6x on the cc-NUMA system. However, to obtain the highest performance (speedup of 33.4x and throughput of 200 QHD frames per second), several cc-NUMA specific optimizations are necessary such as optimizing the page placement and statically assigning threads to cores. Finally, on the Cell platform a near ideal speedup of 16.5x is achieved by completely hiding the communication latency.EC/FP7/248647/EU/ENabling technologies for a programmable many-CORE/ENCOR

Design and application of variable-to-variable length codes

This work addresses the design of minimum redundancy variable-to-variable length (V2V) codes and studies their suitability for using them in the probability interval partitioning entropy (PIPE) coding concept as an alternative to binary arithmetic coding. Several properties and new concepts for V2V codes are discussed and a polynomial-based principle for designing V2V codes is proposed. Various minimum redundancy V2V codes are derived and combined with the PIPE coding concept. Their redundancy is compared to the binary arithmetic coder of the video compression standard H.265/HEVC

Algorithms for compression of high dynamic range images and video

The recent advances in sensor and display technologies have brought upon the High Dynamic Range (HDR) imaging capability. The modern multiple exposure HDR sensors can achieve the dynamic range of 100-120 dB and LED and OLED display devices have contrast ratios of 10^5:1 to 10^6:1. Despite the above advances in technology the image/video compression algorithms and associated hardware are yet based on Standard Dynamic Range (SDR) technology, i.e. they operate within an effective dynamic range of up to 70 dB for 8 bit gamma corrected images. Further the existing infrastructure for content distribution is also designed for SDR, which creates interoperability problems with true HDR capture and display equipment. The current solutions for the above problem include tone mapping the HDR content to fit SDR. However this approach leads to image quality associated problems, when strong dynamic range compression is applied. Even though some HDR-only solutions have been proposed in literature, they are not interoperable with current SDR infrastructure and are thus typically used in closed systems. Given the above observations a research gap was identified in the need for efficient algorithms for the compression of still images and video, which are capable of storing full dynamic range and colour gamut of HDR images and at the same time backward compatible with existing SDR infrastructure. To improve the usability of SDR content it is vital that any such algorithms should accommodate different tone mapping operators, including those that are spatially non-uniform. In the course of the research presented in this thesis a novel two layer CODEC architecture is introduced for both HDR image and video coding. Further a universal and computationally efficient approximation of the tone mapping operator is developed and presented. It is shown that the use of perceptually uniform colourspaces for internal representation of pixel data enables improved compression efficiency of the algorithms. Further proposed novel approaches to the compression of metadata for the tone mapping operator is shown to improve compression performance for low bitrate video content. Multiple compression algorithms are designed, implemented and compared and quality-complexity trade-offs are identified. Finally practical aspects of implementing the developed algorithms are explored by automating the design space exploration flow and integrating the high level systems design framework with domain specific tools for synthesis and simulation of multiprocessor systems. The directions for further work are also presented

Image and Video Coding Techniques for Ultra-low Latency

The next generation of wireless networks fosters the adoption of latency-critical applications such as XR, connected industry, or autonomous driving. This survey gathers implementation aspects of different image and video coding schemes and discusses their tradeoffs. Standardized video coding technologies such as HEVC or VVC provide a high compression ratio, but their enormous complexity sets the scene for alternative approaches like still image, mezzanine, or texture compression in scenarios with tight resource or latency constraints. Regardless of the coding scheme, we found inter-device memory transfers and the lack of sub-frame coding as limitations of current full-system and software-programmable implementations.publishedVersionPeer reviewe