From wearable towards epidermal computing : soft wearable devices for rich interaction on the skin

Human skin provides a large, always available, and easy to access real-estate for interaction. Recent advances in new materials, electronics, and human-computer interaction have led to the emergence of electronic devices that reside directly on the user's skin. These conformal devices, referred to as Epidermal Devices, have mechanical properties compatible with human skin: they are very thin, often thinner than human hair; they elastically deform when the body is moving, and stretch with the user's skin. Firstly, this thesis provides a conceptual understanding of Epidermal Devices in the HCI literature. We compare and contrast them with other technical approaches that enable novel on-skin interactions. Then, through a multi-disciplinary analysis of Epidermal Devices, we identify the design goals and challenges that need to be addressed for advancing this emerging research area in HCI. Following this, our fundamental empirical research investigated how epidermal devices of different rigidity levels affect passive and active tactile perception. Generally, a correlation was found between the device rigidity and tactile sensitivity thresholds as well as roughness discrimination ability. Based on these findings, we derive design recommendations for realizing epidermal devices. Secondly, this thesis contributes novel Epidermal Devices that enable rich on-body interaction. SkinMarks contributes to the fabrication and design of novel Epidermal Devices that are highly skin-conformal and enable touch, squeeze, and bend sensing with co-located visual output. These devices can be deployed on highly challenging body locations, enabling novel interaction techniques and expanding the design space of on-body interaction. Multi-Touch Skin enables high-resolution multi-touch input on the body. We present the first non-rectangular and high-resolution multi-touch sensor overlays for use on skin and introduce a design tool that generates such sensors in custom shapes and sizes. Empirical results from two technical evaluations confirm that the sensor achieves a high signal-to-noise ratio on the body under various grounding conditions and has a high spatial accuracy even when subjected to strong deformations. Thirdly, Epidermal Devices are in contact with the skin, they offer opportunities for sensing rich physiological signals from the body. To leverage this unique property, this thesis presents rapid fabrication and computational design techniques for realizing Multi-Modal Epidermal Devices that can measure multiple physiological signals from the human body. Devices fabricated through these techniques can measure ECG (Electrocardiogram), EMG (Electromyogram), and EDA (Electro-Dermal Activity). We also contribute a computational design and optimization method based on underlying human anatomical models to create optimized device designs that provide an optimal trade-off between physiological signal acquisition capability and device size. The graphical tool allows for easily specifying design preferences and to visually analyze the generated designs in real-time, enabling designer-in-the-loop optimization. Experimental results show high quantitative agreement between the prediction of the optimizer and experimentally collected physiological data. Finally, taking a multi-disciplinary perspective, we outline the roadmap for future research in this area by highlighting the next important steps, opportunities, and challenges. Taken together, this thesis contributes towards a holistic understanding of Epidermal Devices}: it provides an empirical and conceptual understanding as well as technical insights through contributions in DIY (Do-It-Yourself), rapid fabrication, and computational design techniques.Die menschliche Haut bietet eine große, stets verfügbare und leicht zugängliche Fläche für Interaktion. Jüngste Fortschritte in den Bereichen Materialwissenschaft, Elektronik und Mensch-Computer-Interaktion (Human-Computer-Interaction, HCI) [so that you can later use the Englisch abbreviation] haben zur Entwicklung elektronischer Geräte geführt, die sich direkt auf der Haut des Benutzers befinden. Diese sogenannten Epidermisgeräte haben mechanische Eigenschaften, die mit der menschlichen Haut kompatibel sind: Sie sind sehr dünn, oft dünner als ein menschliches Haar; sie verformen sich elastisch, wenn sich der Körper bewegt, und dehnen sich mit der Haut des Benutzers. Diese Thesis bietet, erstens, ein konzeptionelles Verständnis von Epidermisgeräten in der HCI-Literatur. Wir vergleichen sie mit anderen technischen Ansätzen, die neuartige Interaktionen auf der Haut ermöglichen. Dann identifizieren wir durch eine multidisziplinäre Analyse von Epidermisgeräten die Designziele und Herausforderungen, die angegangen werden müssen, um diesen aufstrebenden Forschungsbereich voranzubringen. Im Anschluss daran untersuchten wir in unserer empirischen Grundlagenforschung, wie epidermale Geräte unterschiedlicher Steifigkeit die passive und aktive taktile Wahrnehmung beeinflussen. Im Allgemeinen wurde eine Korrelation zwischen der Steifigkeit des Geräts und den taktilen Empfindlichkeitsschwellen sowie der Fähigkeit zur Rauheitsunterscheidung festgestellt. Basierend auf diesen Ergebnissen leiten wir Designempfehlungen für die Realisierung epidermaler Geräte ab. Zweitens trägt diese Thesis zu neuartigen Epidermisgeräten bei, die eine reichhaltige Interaktion am Körper ermöglichen. SkinMarks trägt zur Herstellung und zum Design neuartiger Epidermisgeräte bei, die hochgradig an die Haut angepasst sind und Berührungs-, Quetsch- und Biegesensoren mit gleichzeitiger visueller Ausgabe ermöglichen. Diese Geräte können an sehr schwierigen Körperstellen eingesetzt werden, ermöglichen neuartige Interaktionstechniken und erweitern den Designraum für die Interaktion am Körper. Multi-Touch Skin ermöglicht hochauflösende Multi-Touch-Eingaben am Körper. Wir präsentieren die ersten nicht-rechteckigen und hochauflösenden Multi-Touch-Sensor-Overlays zur Verwendung auf der Haut und stellen ein Design-Tool vor, das solche Sensoren in benutzerdefinierten Formen und Größen erzeugt. Empirische Ergebnisse aus zwei technischen Evaluierungen bestätigen, dass der Sensor auf dem Körper unter verschiedenen Bedingungen ein hohes Signal-Rausch-Verhältnis erreicht und eine hohe räumliche Auflösung aufweist, selbst wenn er starken Verformungen ausgesetzt ist. Drittens, da Epidermisgeräte in Kontakt mit der Haut stehen, bieten sie die Möglichkeit, reichhaltige physiologische Signale des Körpers zu erfassen. Um diese einzigartige Eigenschaft zu nutzen, werden in dieser Arbeit Techniken zur schnellen Herstellung und zum computergestützten Design von multimodalen Epidermisgeräten vorgestellt, die mehrere physiologische Signale des menschlichen Körpers messen können. Die mit diesen Techniken hergestellten Geräte können EKG (Elektrokardiogramm), EMG (Elektromyogramm) und EDA (elektrodermale Aktivität) messen. Darüber hinaus stellen wir eine computergestützte Design- und Optimierungsmethode vor, die auf den zugrunde liegenden anatomischen Modellen des Menschen basiert, um optimierte Gerätedesigns zu erstellen. Diese Designs bieten einen optimalen Kompromiss zwischen der Fähigkeit zur Erfassung physiologischer Signale und der Größe des Geräts. Das grafische Tool ermöglicht die einfache Festlegung von Designpräferenzen und die visuelle Analyse der generierten Designs in Echtzeit, was eine Optimierung durch den Designer im laufenden Betrieb ermöglicht. Experimentelle Ergebnisse zeigen eine hohe quantitative Übereinstimmung zwischen den Vorhersagen des Optimierers und den experimentell erfassten physiologischen Daten. Schließlich skizzieren wir aus einer multidisziplinären Perspektive einen Fahrplan für zukünftige Forschung in diesem Bereich, indem wir die nächsten wichtigen Schritte, Möglichkeiten und Herausforderungen hervorheben. Insgesamt trägt diese Arbeit zu einem ganzheitlichen Verständnis von Epidermisgeräten bei: Sie liefert ein empirisches und konzeptionelles Verständnis sowie technische Einblicke durch Beiträge zu DIY (Do-It-Yourself), schneller Fertigung und computergestützten Entwurfstechniken

Index to 1981 NASA Tech Briefs, volume 6, numbers 1-4

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1981 Tech Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

Numerical and experimental study of electroadhesion to enable manufacturing automation

Robotics and autonomous systems (RAS) have great potential to propel the world to future growth. Electroadhesion is a promising and potentially revolutionising material handling technology for manufacturing automation applications. There is, however, a lack of an in-depth understanding of this electrostatic adhesion phenomenon based on a confident electroadhesive pad design, manufacture, and testing platform and procedure. This Ph.D. research endeavours to obtain a more comprehensive understanding of electroadhesion based on an extensive literature review, theoretical modelling, electrostatic simulation, and experimental validation based on a repeatable pad design, manufacture, and testing platform and procedure. [Continues.

Sketch-based digital storyboards and floor plans for authoring computer-generated film pre-visuals

Pre-visualisation is an important tool for planning films during the pre-production phase of filmmaking. Existing pre-visualisation authoring tools do not effectively support the user in authoring pre-visualisations without impairing software usability. These tools require the user to either have programming skills, be experienced in modelling and animation, or use drag-and-drop style interfaces. These interaction methods do not intuitively fit with pre-production activities such as floor planning and storyboarding, and existing tools that apply a storyboarding metaphor do not automatically interpret user sketches. The goal of this research was to investigate how sketch-based user interfaces and methods from computer vision could be used for supporting pre-visualisation authoring using a storyboarding approach. The requirements for such a sketch-based storyboarding tool were determined from literature and an interview with Triggerfish Animation Studios. A framework was developed to support sketch-based pre-visualisation authoring using a storyboarding approach. Algorithms for describing user sketches, recognising objects and performing pose estimation were designed to automatically interpret user sketches. A proof of concept prototype implementation of this framework was evaluated in order to assess its usability benefit. It was found that the participants could author pre-visualisations effectively, efficiently and easily. The results of the usability evaluation also showed that the participants were satisfied with the overall design and usability of the prototype tool. The positive and negative findings of the evaluation were interpreted and combined with existing heuristics in order to create a set of guidelines for designing similar sketch-based pre-visualisation authoring tools that apply the storyboarding approach. The successful implementation of the proof of concept prototype tool provides practical evidence of the feasibility of sketch-based pre-visualisation authoring. The positive results from the usability evaluation established that sketch-based interfacing techniques can be used effectively with a storyboarding approach for authoring pre-visualisations without impairing software usability

Multi-electrode array recording and data analysis methods for molluscan central nervous systems

In this work the use of the central nervous system (CNS) of the aquatic snail Lymnaea stagnalis on planar multi-electrode arrays (MEAs) was developed and analysis methods for the data generated were created. A variety of different combinations of configurations of tissue from the Lymnaea CNS were explored to determine the signal characteristics that could be recorded by sixty channel MEAs. In particular, the suitability of the semi-intact system consisting of the lips, oesophagus, CNS, and associated nerve connectives was developed for use on the planar MEA. The recording target area of the dorsal surface of the buccal ganglia was selected as being the most promising for study and recordings of its component cells during fictive feeding behaviour stimulated by sucrose were made. The data produced by this type of experimentation is very high volume and so its analysis required the development of a custom set of software tools. The goal of this tool set is to find the signal from individual neurons in the data streams of the electrodes of a planar MEA, to estimate their position, and then to predict their causal connectivity. To produce such an analysis techniques for noise filtration, neural spike detection, and group detection of bursts of spikes were created to pre-process electrode data streams. The Kohonen self-organising map (SOM) algorithm was adapted for the purpose of separating detected spikes into data streams representing the spike output of individual cells found in the target system. A significant addition to SOM algorithm was developed by the concurrent use of triangulation methods based on current source density analysis to predict the position of individual cells based on their spike output on more than one electrode. The likely functional connectivity of individual neurons identified by the SOM technique were analysed through the use of a statistical causality method known as Granger causality/causal connectivity. This technique was used to produce a map of the likely connectivity between neural sources