4,425 research outputs found
Electrical performance characteristics of high power converters for space power applications
The first goal of this project was to investigate various converters that would be suitable for processing electric power derived from a nuclear reactor. The implementation is indicated of a 20 kHz system that includes a source converter, a ballast converter, and a fixed frequency converter for generating the 20 kHz output. This system can be converted to dc simply by removing the fixed frequency converter. This present study emphasized the design and testing of the source and ballast converters. A push-pull current-fed (PPCF) design was selected for the source converter, and a 2.7 kW version of this was implemented using three 900 watt modules in parallel. The characteristic equation for two converters in parallel was derived, but this analysis did not yield any experimental methods for measuring relative stability. The three source modules were first tested individually and then in parallel as a 2.7 kW system. All tests proved to be satisfactory; the system was stable; efficiency and regulation were acceptable; and the system was fault tolerant. The design of a ballast-load converter, which was operated as a shunt regulator, was investigated. The proposed power circuit is suitable for use with BJTs because proportional base drive is easily implemented. A control circuit which minimizes switching frequency ripple and automatically bypasses a faulty shunt section was developed. A nonlinear state-space-averaged model of the shunt regulator was developed and shown to produce an accurate incremental (small-signal) dynamic model, even though the usual state-space-averaging assumptions were not met. The nonlinear model was also shown to be useful for large-signal dynamic simulation using PSpice
The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics
The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future
Incremental learning for large-scale stream data and its application to cybersecurity
As many human currently depend on technologies to assist with daily tasks,
there are more and more applications which have been developed to be fit in one
small gadget such as smart phone and tablet. Thus, by carrying this small gadget
alone, most of our tasks are able to be settled efficiently and fast. Until the end
of 20th century, mobile phones are only used to call and to send short message
service (sms). However, in early 21st century, a rapid revolution of communi�cation technology from mobile phone into smart phone has been seen in which
the smart phone is equipped by 4G Internet line along with the telephone service
provider line. Thus, the users are able to make a phone call, send messages using
variety of application such as Whatsapp and Line, send email, serving websites,
accessing maps and handling some daily tasks via online using online banking,
online shopping and online meetings via video conferences. In previous years, if
there are cases of missing children or missing cars, the victims would rely on the
police investigation. But now, as easy as uploading a notification about the loss
on Facebook and spread the news among Facebook users, there are more people
are able to help in the search. Despite the advantages that can be obtained using
these technologies, there are a group of irresponsible people who take advan�tage of current technologies for their own self-interest. Among the applications
that are usually being used by almost Internet users and also are often misused
by cyber criminals are email and websites. Therefore, we take this initiative to
make enhancement in cyber security application to avoid the Internet users from
being trapped and deceived by the trick of cyber criminals by developing detec�tion system of malicious spam email and Distributed Denial of Services (DDoS) 377.1781.8781$0,1$+
iii
backscatter.
Imagine that a notice with a logo of Mobile Phone company is received by
an email informing that the customer had recently run up a large mobile phone
bill. A link regarding the bill is attached for him/her to find out the details.
Since, the customer thinks that the billing might be wrong, thus the link is
clicked. However, the link is directed to a webpage which displays a status that
currently the webpage is under construction. Then the customer closes the page
and thinking of to visit the website again at other time. Unfortunately, after
a single click actually a malicious file is downloaded and installed without the
customer aware of it. That malicious file most probably is a Trojan that capable
to steal confidential information from victim’s computer. On the next day, when
the same person is using the same computer to log in the online banking, all
of a sudden find out that his/her money is lost totally. This is one of a worst
case scenario of malicious spam email which is usually handled by cybersecurity
field. Another different case of cybersecurity is the Distributed Denial of Services
(DDoS) attack. Let say, Company X is selling flowers via online in which the
market is from the local and international customer. The online business of
Company X is running normally as usual, until a day before mother’s day, the
webpage of Company X is totally down and the prospective customers could not
open the webpage to make order to be sent specially for their beloved mother.
Thus, the customers would search another company that sells the same item. The
Company X server is down, most probably because of the DDoS attack where a
junk traffic is sent to that company server which makes that server could not
serve the request by the legitimate customers. This attack effect not only the
profit of the company, but also reputation damage, regular customer turnover
and productivity decline.
Unfortunately, it is difficult for a normal user like us to detect malicious spam 377$
3(53867$.1781.8781+
email or DDoS attack with naked eyes. It is because recently the spammers
and attacker had improved their strategy so that the malicious email and the
DDoS packets are hardly able to be differentiated with the normal email and
data packets. Once the Social Engineering is used by the spammers to create
relevant email content in the malicious spam email and when a new campaign
of DDoS attack is launched by the attacker, no normal users are capable to
distinguish the benign and malicious email or data packets. This is where my
Ph.D project comes in handy. My Ph.d is focusing on constructing a detection
system of malicious spam email and DDoS attack using a large number of dataset
which are obtained by a server that collect double-bounce email and darknet for
malicious spam email detection system and DDoS backscatter detection system,
respectively. As many up-to-date data are used during the learning, the detection
system would become more robust to the latest strategy of the cybercriminal.
Therefore, the scenario mentioned above can be avoided by assisting the user
with important information at the user-end such as malicious spam email filter
or at the server firewall. First of all, the method to learn large-scale stream
data must be solved before implementing it in the detection system. Therefore,
in Chapter 2, the general learning strategy of large-scale data is introduced to
be used in the cybersecurity applications which are discussed in Chapter 3 and
Chapter 4, respectively.
One of a critical criterion of the detection system is capable to learn fast because
after the learning, the updated information needs to be passed to user to avoid
the user from being deceived by the cybercriminal. To process large-scale data
sequences, it is important to choose a suitable learning algorithm that is capable
to learn in real time. Incremental learning has an ability to process large data
in chunk and update the parameters after learning each chunk. Such type of
learning keep and update only the minimum information on a classifier model. 377.1781.8781$0,1$+
Therefore, it requires relatively small memory and short learning time. On the
other hand, batch learning is not suitable because it needs to store all training
data, which consume a large memory capacity. Due to the limited memory, it is
certainly impossible to process online large-scale data sequences using the batch
learning. Therefore, the learning of large-scale stream data should be conducted
incrementally.
This dissertation contains of five chapters. In Chapter 1, the concept of in�cremental learning is briefly described and basic theories on Resource Allocating
Network (RAN) and conventional data selection method are discussed in this
chapter. Besides that, the overview of this dissertation is also elaborated in this
chapter. In Chapter 2, we propose a new algorithm based on incremental Radial
Basis Function Network (RBFN) to accelerate the learning in stream data. The
data sequences are represented as a large chunk size of data given continuously
within a short time. In order to learn such data, the learning should be carried
out incrementally. Since it is certainly impossible to learn all data in a short pe�riod, selecting essential data from a given chunk can shorten the learning time. In
our method, we select data that are located in untrained or “not well-learned”
region and discard data at trained or “well-learned” region. These regions are
represented by margin flag. Each region is consisted of similar data which are
near to each other. To search the similar data, the well-known LSH method pro�posed by Andoni et al. is used. The LSH method indeed has proven be able to
quickly find similar objects in a large database. Moreover, we utilize the LSH ʼs
properties; hash value and Hash Table to further reduced the processing time. A
flag as a criterion to decide whether to choose or not the training data is added in
the Hash Table and is updated in each chunk sequence. Whereas, the hash value
of RBF bases that is identical with the hash value of the training data is used to
select the RBF bases that is near to the training data. The performance results of 377$
3(53867$.1781.8781+
vi
the numerical simulation on nine UC Irvine (UCI) Machine Learning Repository
datasets indicate that the proposed method can reduce the learning time, while
keeping the similar accuracy rate to the conventional method. These results indi�cate that the proposed method can improve the RAN learning algorithm towards
the large-scale stream data processing.
In Chapter 3, we propose a new online system to detect malicious spam emails
and to adapt to the changes of malicious URLs in the body of spam emails by
updating the system daily. For this purpose, we develop an autonomous system
that learns from double-bounce emails collected at a mail server. To adapt to new
malicious campaigns, only new types of spam emails are learned by introducing an
active learning scheme into a classifier model. Here, we adopt Resource Allocating
Network with Locality Sensitive Hashing (RAN-LSH) as a classifier model with
data selection. In this data selection, the same or similar spam emails that
have already been learned are quickly searched for a hash table using Locally
Sensitive Hashing, and such spam emails are discarded without learning. On
the other hand, malicious spam emails are sometimes drastically changed along
with a new arrival of malicious campaign. In this case, it is not appropriate to
classify such spam emails into malicious or benign by a classifier. It should be
analyzed by using a more reliable method such as a malware analyzer. In order
to find new types of spam emails, an outlier detection mechanism is implemented
in RAN-LSH. To analyze email contents, we adopt the Bag-of-Words (BoW)
approach and generate feature vectors whose attributes are transformed based
on the normalized term frequency-inverse document frequency. To evaluate the
developed system, we use a dataset of double-bounce spam emails which are
collected from March 1, 2013 to May 10, 2013. In the experiment, we study the
effect of introducing the outlier detection in RAN-LSH. As a result, by introducing
the outlier detection, we confirm that the detection accuracy is enhanced on 377.1781.8781+
average over the testing period.
In Chapter 4, we propose a fast Distributed Denial of Service (DDoS) backscat�ter detection system to detect DDoS backscatter from a combination of protocols
and ports other than the following two labeled packets: Transmission Control
Protocol (TCP) Port 80 (80/TCP) and User datagram Protocol (UDP) Port 53
(53/UDP). Usually, it is hard to detect DDoS backscatter from the unlabeled
packets, where an expert is needed to analyze every packet manually. Since it
is a costly approach, we propose a detection system using Resource Allocating
Network (RAN) with data selection to select essential data. Using this method,
the learning time is shorten, and thus, the DDoS backscatter can be detected
fast. This detection system consists of two modules which are pre-processing
and classifier. With the former module, the packets information are transformed
into 17 feature-vectors. With the latter module, the RAN-LSH classifier is used,
where only data located at untrained region are selected. The performance of the
proposed detection system is evaluated using 9,968 training data from 80/TCP
and 53/UDP, whereas 5,933 test data are from unlabeled packets which are col�lected from January 1st, 2013 until January 20th, 2014 at National Institute of
Information and Communications Technology (NICT), Japan. The results indi�cate that detection system can detect the DDoS backscatter from both labeled
and unlabeled packets with high recall and precision rate within a short time.
Finally, in Chapter 5, we discussed the conclusions and the future work of our
study: RAN-LSH classifier, malicious spam email detection system and DDoS
backscatter detection system
Recommended from our members
Harmonic current extraction of shunt active power filter based on prediction current technique - Hysteresis PWM
Due to the wide spread of power electronics equipment in modern electrical systems, the increase of the
harmonics disturbance in the ac mains currents has became a major concern due to the adverse effects on all
analysis and simulation using MATLAB-SIMULINK of a three-phase shunt active equipment. This paper presents the Shunt Active Power Filter (SAPF) to compensate the generated harmonics by 3-phase Rectifier Bridge fed R-L load. The harmonic current extraction is based on prediction current extraction technique -hysteresis PWM generation pattern
Impact of harmonic voltage distortion on the voltage sag behavior of adjustable speed drives
The behavior of adjustable speed drives under voltage sag conditions and supplied form non-sinusoidal voltage waveforms has received little attention in recent years. This paper shows that voltage harmonic distortion has a major impact on the drive behavior. The impact of voltage sag conditions, including harmonics is represented by means of voltage tolerance curves. To overcome the impact, a fast field weakening control scheme for field oriented induction motor drives is analyzed
A Practical Model and an Optimal Controller for Variable Speed Wind Turbine Permanent Magnet Synchronous Generator
The aim of this paper is the complete modeling and simulation of an optimal control system using practical setup parameters for a wind energy conversion system (WECS) through a direct driven permanent magnet synchronous generator (D-PMSG) feeding ac power to the utility grid. The generator is connected to the grid through a back-to-back PWM converter with a switching frequency of 10 KHz. A maximum power point tracking (MPPT) control is proposed to ensure the maximum power capture from wind turbine, and a PI controller designed for the wind turbine to generate optimum speed for the generator via an aerodynamic model. MATLAB/Simulink results demonstrate the accuracy of the developed control scheme
Universal fractional-order design of linear phase lead compensation multirate repetitive control for PWM inverters
Repetitive control (RC) with linear phase lead compensation provides a simple but very effective control solution for any periodic signal with a known period. Multirate repetitive control (MRC) with a downsampling rate can reduce the need of memory size and computational cost, and then leads to a more feasible design of the plug-in repetitive control systems in practical applications. However, with fixed sampling rate, both MRC and its linear phase lead compensator are sensitive to the ratio of the sampling frequency to the frequency of interested periodic signals: (1) MRC might fails to exactly compensate the periodic signal in the case of a fractional ratio; (2) linear phase lead compensation might fail to enable MRC to achieve satisfactory performance in the case of a low ratio. In this paper, a universal fractional-order design of linear phase lead compensation MRC is proposed to tackle periodic signals with high accuracy, fast dynamic response, good robustness, and cost-effective implementation regardless of the frequency ratio, which offers a unified framework for housing various RC schemes in extensive engineering application. An application example of programmable AC power supply is explored to comprehensively testify the effectiveness of the proposed control scheme
To develop an efficient variable speed compressor motor system
This research presents a proposed new method of improving the energy efficiency of a Variable Speed Drive (VSD) for induction motors. The principles of VSD are reviewed with emphasis on the efficiency and power losses associated with the operation of the variable speed compressor motor drive, particularly at low speed operation.The efficiency of induction motor when operated at rated speed and load torque
is high. However at low load operation, application of the induction motor at rated flux will cause the iron losses to increase excessively, hence its efficiency will reduce
dramatically. To improve this efficiency, it is essential to obtain the flux level that minimizes the total motor losses. This technique is known as an efficiency or energy
optimization control method. In practice, typical of the compressor load does not require high dynamic response, therefore improvement of the efficiency optimization
control that is proposed in this research is based on scalar control model.In this research, development of a new neural network controller for efficiency optimization control is proposed. The controller is designed to generate both voltage and frequency reference signals imultaneously. To achieve a robust controller from variation of motor parameters, a real-time or on-line learning algorithm based on a second order optimization Levenberg-Marquardt is employed. The simulation of the proposed controller for variable speed compressor is presented. The results obtained
clearly show that the efficiency at low speed is significant increased. Besides that the speed of the motor can be maintained. Furthermore, the controller is also robust to the motor parameters variation. The simulation results are also verified by experiment
PFC bridge converter for voltage-controlled adjustable-speed PMBLDCM drive
In this paper, a buck DC-DC bridge converter is used as a power factor correction (PFC) converter for feeding a voltage source inverter (VSI) based permanent magnet brushless DC motor (PMBLDCM) drive. The front end of the PFC converter is a diode bridge rectifier (DBR) fed from single phase AC mains. The PMBLDCM is used to drive the compressor of an air conditioner through a three-phase voltage source inverter (VSI) fed from a variable voltage DC link. The speed of the air conditioner is controlled to conserve energy using a new concept of voltage control at a DC link proportional to the desired speed of the PMBLDC motor. Therefore, VSI operates only as an electronic commutator of the PMBLDCM. The current of the PMBLDCM is controlled by setting the reference voltage at the DC link as a ramp. The proposed PMBLDCM drive with voltage control-based PFC converter was designed and modeled. The performance is simulated in Matlab-Simulink environment for an air conditioner compressor load driven through a 3.75 kW, 1500 rpm PMBLDC motor. To validate the effectiveness of the proposed speed control scheme, the evaluation results demonstrate improved efficiency of the complete drive with the PFC feature in a wide range of speed and input AC voltage
- …