High-Speed Data Acquisition System for Nanoscale Imaging

This technical report is the product of a senior design project in the Department of Electrical and Computer Engineering at the University of Texas at Austin and was written in conformance with the ECE senior design final report requirements. Current scanning probe microscopy systems are often limited by the speed and resultion at which they sample. In this technical report, we demonstrate a novel data acquisition, processing, and visualization system that leverages machine learning to collect and analyze data from an extant scanning probe microscope at 4 MS/s. The system comprises four subsystems: a current preamplifier, a data acquisition system, a data processing and visualization module, and an interactive graphic user interface. The current preamplifier amplifies small currents on the order of nanoamps to voltages readable by the data acquisition system. The data acquisition system takes in input data from the scanning probe microscope and stores them into usable file formats for the data processing module. The data processing module uses various software signal processing techniques to analyze and visualize the data. Finally, the graphic user interface acts as the main user control system, initiating data collection and viewing collected data on user command. Future work on this system includes system-wide testing as well as optimizing the robustness of each subsystem to meet the constraints of the scanning probe microscope system.Electrical and Computer Engineerin

Control of power converter in modern power systems

A la portada consta el nom del programa interuniversitari: Joint Doctoral Programme in Electric Energy Systems [by the] Universidad de Málaga, Universidad de Sevilla, Universidad del País Vasco/Euskal Erriko Unibertsitatea i Universitat Politècnica de CatalunyaPower system is undergoing an unpreceded paradigm shift: from centralized to distributed generation. As the renewable-based generations and battery storage systems are increasingly displacing conventional generations, it becomes more and. more difficult to maintain the stability and reliability of the grid by using only conventional generations. The main reason for the degradation of grid stability is the rapid penetration of nonconventional sources. These new generations interface with the grids through power electronics converters which are conventionally designed to maximize conversion efficiency and resource utilization. Indeed, these power converters only focus on their internal operation despite the grid conditions, which often worsens the grid operation. To overcome such a drawback, the grid-forming concept has been proposed for power converters, aiming to redesign the control of the power converters to enforce more grid-friendly behaviours such as inertia response and power oscillation damping to name a few. Despite the rich literature, actual adaptation of grid-forming controller in real-world applications is still rare because incentives for renewable power plants to provide services based on such advanced grid-forming functions were at best scarce. In the last years, however, several system operators have imposed new requirements and markets for grid-supporting services. In addition, the existing grid-forming controllers require modification to low-level control firmware of a power converter, which is often unrealistic due to the control hardware limitations as well as necessary testing and certifications. To ensure a stable operation of a grid-forming converter under adverse operating conditions, a robust voltage sensorless current controller is developed in this PhD thesis. The proposed controller is able to handle most of the possible abnormal conditions of the grid such as impedance variations, unbalanced voltage; harmonics distortion. These abnormalities of the grid are mathematically represented using equivalent linear models such that they can be used for calculating the controller gains. Linear matrix inequality techniques are also used to facilitate parameter tuning. In fact, the performance and stability of the current control loop can be determined through only two tuning parameters instead of eight parameters for a controller of a similar structure. The existing grid-forming implementations are designed considering that the control firmware of the power converter can be upgraded at will. However, modifications of the control firmware are not straightforward and cost-effective at mass scale. To overcome such a limitation, an external synchronous controller is presented in this PhD thesis. The external synchronous controller uses measurements, which are either provided by the power converter or a dedicated measurement unit, to calculate the actual active and reactive power that should be injected by the power converters in a way that the power plant acts as an aggregated grid­forming converter. As a result, any conventional power converters can be utilized for providing grid-supporting services with minimal modification to the existing infrastructure. Power converters can provide even better performance than a synchronous generator if a proper control scheme is used. In this regard, the final chapter of this PhD thesis presents the multi-rotor virtual machine implementation for grid-forming converter to boost their damping performance to power oscillations. The multi-rotor virtual machine-controller implements several virtual rotors instead of only one rotor as in typical grid-forming strategies. Since each of the virtual rotors is tuned to target a specific critical mode, the damping participation to such a mode can be increased and adjusted individually. The controllers presented in this PhD thesis are validated through simulators and experiments in the framework of the H2020 FlexiTranstore project. The results are throughout analysed to assess the control performance as well as to highlight possible implications.A medida que las generaciones basadas en energías renovables y los sistemas de almacenamiento de baterías desplazan la generación convencional, se vuelve cada vez más difícil mantener la estabilidad y confiabilidad de la red. Estas nuevas generaciones interactúan con las redes a través de convertidores de electrónica de potencia que están diseñados tradicionalmente para maximizar la eficiencia de conversión y la utilización de recursos. Estos convertidores centran su funcionamiento interno independientemente de las condiciones de la red, lo que a menudo empeora el funcionamiento de la red. Para esto, se ha propuesto el concepto de convertidores de potencia formadores de red (grid-forming), con el objetivo de rediseñar el control de los convertidores de potencia para imponer comportamientos más favorables a la red, por ejemplo, la respuesta inercial y la amortiguación de oscilaciones de potencia. No en tanto, la adaptación real del controlador grid-forming en aplicaciones del mundo real todavía es escasa debido a los pocos incentivos para que las plantas de energía renovable proporcionen servicios basados en funciones de formación de red tan avanzadas. Aunque en los últimos años, operadores de sistemas han impuesto nuevos requisitos y mercados para servicios auxiliares, los controladores grid-forming existentes requieren cambios en el firmware de control de bajo nivel de un convertidor de potencia, algo poco realista debido a las limitaciones del hardware de control, así como a las pruebas y certificaciones necesarias. En esta tesis se desarrolla un controlador de corriente robusto, sin sensor de tensión, para garantizar el funcionamiento estable de un convertidor grid-forming en condiciones de operación adversas. Este controlador es capaz de manejar la mayoría de las condiciones anormales de red, como variaciones de impedancia, tensión desequilibrada y distorsión de armónicos. Estas anomalías de la red se representan matemáticamente mediante modelos lineales equivalentes, utilizados para calcular las ganancias del controlador. También, usando técnicas de desigualdad matricial lineal para facilitar el ajuste de parámetros. De hecho, el rendimiento y la estabilidad del bucle de control de la corriente pueden determinarse mediante sólo dos parámetros de sintonización. Las implementaciones de formación de red existentes están diseñadas considerando que el firmware de control del convertidor de potencia puede actualizarse a voluntad. Sin embargo, las modificaciones del firmware de control no son sencillas ni rentables a gran escala. Por tanto, esta tesis presenta un controlador síncrono externo que utiliza las mediciones proporcionadas por el convertidor de potencia o por una unidad de medición dedicada para calcular la potencia activa y reactiva real que deben inyectar los convertidores de potencia, de forma que la central eléctrica actúe como un convertidor grid-forming agregado. Como resultado, cualquier convertidor de potencia convencional puede utilizarse para proporcionar servicios de apoyo a la red con una modificación mínima de la infraestructura existente. Los convertidores de potencia pueden ofrecer mejor rendimiento que un generador síncrono utilizando un esquema de control adecuado. El último capítulo de esta tesis presenta la implementación de una máquina virtual multirrotor para que los convertidores de red aumenten su rendimiento de amortiguación de las oscilaciones de potencia. El controlador de la máquina virtual multirrotor implementa varios rotores virtuales en lugar de un solo rotor como en las estrategias típicas de grid-forming. Dado que cada uno de los rotores virtuales está sintonizado para dirigirse a un modo crítico específico, la participación de la amortiguación a dicho modo puede aumentarse y ajustarse individualmente. Los controladores presentados en esta tesis doctoral han sido validados mediante simulaciones y experimentos en el marco del proyecto H2020 FlexiTranstore.Postprint (published version

A Low-Power Silicon-Photomultiplier Readout ASIC for the CALICE Analog Hadronic Calorimeter

The future e + e − collider experiments, such as the international linear collider, provide precise measurements of the heavy bosons and serve as excellent tests of the underlying fundamental physics. To reconstruct these bosons with an unprecedented resolution from their multi-jet final states, a detector system employing the particle flow approach has been proposed, requesting calorimeters with imaging capabilities. The analog hadron calorimeter based on the SiPM-on-tile technology is one of the highly granular candidates of the imaging calorimeters. To achieve the compactness, the silicon-photomultiplier (SiPM) readout electronics require a low-power monolithic solution. This thesis presents the design of such an application-specific integrated circuit (ASIC) for the charge and timing readout of the SiPMs. The ASIC provides precise charge measurement over a large dynamic range with auto-triggering and local zero-suppression functionalities. The charge and timing information are digitized using channel-wise analog-to-digital and time-to-digital converters, providing a fully integrated solution for the SiPM readout. Dedicated to the analog hadron calorimeter, the power-pulsing technique is applied to the full chip to meet the stringent power consumption requirement. This work also initializes the commissioning of the calorimeter layer with the use of the designed ASIC. An automatic calibration procedure has been developed to optimized the configuration settings for the chip. The new calorimeter base unit with the designed ASIC has been produced and its functionality has been tested