Experimental investigation of a double-diffused MOS structure

Self-aligned polysilicon gate technology was applied to double-diffused MOS (DMOS) construction in a manner that retains processing simplicity and effectively eliminates parasitic overlap capacitance because of the self-aligning feature. Depletion mode load devices with the same dimensions as the DMOS transistors were integrated. The ratioless feature results in smaller dimension load devices, allowing for higher density integration with no increase in the processing complexity of standard MOS technology. A number of inverters connected as ring oscillators were used as a vehicle to test the performance and to verify the anticipated benefits. The propagation time-power dissipation product and process related parameters were measured and evaluated. This report includes (1) details of the process; (2) test data and design details for the DMOS transistor, the load device, the inverter, the ring oscillator, and a shift register with a novel tapered geometry for the output stages; and (3) an analytical treatment of the effect of the distributed silicon gate resistance and capacitance on the speed of DMOS transistors

Design and develop a MOS magnetic memory Final report, 11 Mar. - 11 Sep. 1966

Interface problems between plated wire magnetic memory and MO

Analysis of electric propulsion electrical power conditioning component technology. Volume 1 - Data bank Final report

Analysis of electric propulsion electric power conditioning component technology - data revie

Wide Bandgap Based Devices: Design, Fabrication and Applications, Volume II

Wide bandgap (WBG) semiconductors are becoming a key enabling technology for several strategic fields, including power electronics, illumination, and sensors. This reprint collects the 23 papers covering the full spectrum of the above applications and providing contributions from the on-going research at different levels, from materials to devices and from circuits to systems

Desenvolvimento de protótipo para recuperação de energia das ondas

Currently, estimates indicate that electricity consumption will grow significantly in Europe and worldwide. This demand for electricity cannot be supported by fossil fuels, which led the European Union to set a goal of reducing traditional sources of non-renewable energy. The energy supply should tend to be supported by renewable sources. Wind and sun are among the most significant renewable energy sources. Ocean energy conversion technologies are still in the development, testing and experimental validation phase, with some of these devices having failed given the adversities of the environment in which they operate, which is the sea. These technologies incorporate, for the most part, complex mechanical systems, in which there is direct contact of the mechanisms with relative movements with the sea, and have resulted in reduced energy production and reduced operating life. This project presents the development of the electrical component of a device, whose concept has been developed, for a Power Take Off (PTO) mechanism, for the recovery of energy from sea waves.Atualmente, estimativas apontam que o consumo de eletricidade crescerá na Europa e a nível mundial de forma bastante significativa. Esta procura por energia elétrica não pode ser suportada por combustíveis fósseis, o que levou a União Europeia a estabelecer como objetivo a redução das fontes tradicionais de energia não-renovável. O fornecimento de energia deve ser tendencialmente suportado por fontes renováveis. O vento e o sol estão entre as fontes de energia renovável mais significativas. As tecnologias de conversão da energia dos oceanos ainda se encontram em fase de desenvolvimento, teste e validação experimental, tendo alguns desses dispositivos fracassado dadas as adversidades do meio onde operam, que é o mar. Estas tecnologias incorporam, na sua grande maioria, sistemas mecânicos complexos, em que tem contacto direto de mecanismos com movimentos relativos com o mar, e têm tido como resultado a reduzida produção de energia e o reduzido tempo de vida em operação. Neste projeto apresenta-se o desenvolvimento da componente elétrica de um dispositivo, cujo conceito tem vindo a ser desenvolvido, para um mecanismo Power Take Off (PTO) para a recuperação da energia das ondas do mar.Mestrado em Engenharia de Automação Industria

Local Epitaxial Overgrowth for Stacked Complementary MOS Transistor Pairs

A three-dimensional silicon processing technology for CMOS circuits was developed and characterized. The first fully depleted SOI devices with individually biasable gates on both sides of the silicon film were realized. A vertically stacked CMOS Inverter built by lateral overgrowth was reported for the first time. Nucleation-free epitaxial lateral overgrowth of silicon over thin oxides was developed for both a pancake and a barrel-type epitaxy reactor: This process was optimized to limit damage to gate oxides and minimize dopant diffusion within the Substrate. Autodoping from impurities of the MOS transistors built in the substrate was greatly reduced. A planarisation technique was developed to reduce the silicon film thickness from 13μm to below 0.5μm for full depletion. Chemo-mechanical polishing was modified to yield an automatic etch stop with the corresponding control and uniformity of the silicon film. The resulting wafer topography is more planar than in a conventional substrate CMOS process. PMOS transistors which match the current drive of bulk NM0S devices of equal geometry were characterized, despite the three-times lower hole mobility. Devices realized in the substrate, at the bottom and on top of the SOI film were essentially indistinguishable from bulk devices. A novel device with two insulated gates controlling the same channel was characterized. Inverters were realized both as joint-gate configuration and with symmetric performance of n- and p-channel. These circuits were realized in the area of a single NMOS transistor

An Assessment of Integrated Flywheel System Technology

The current state of the technology in flywheel storage systems and ancillary components, the technology in light of future requirements, and technology development needs to rectify these shortfalls were identified. Technology efforts conducted in Europe and in the United States were reviewed. Results of developments in composite material rotors, magnetic suspension systems, motor/generators and electronics, and system dynamics and control were presented. The technology issues for the various disciplines and technology enhancement scenarios are discussed. A summary of the workshop, and conclusions and recommendations are presented

Design and analysis of SRAMs for energy harvesting systems

PhD ThesisAt present, the battery is employed as a power source for wide varieties of microelectronic systems ranging from biomedical implants and sensor net-works to portable devices. However, the battery has several limitations and incurs many challenges for the majority of these systems. For instance, the design considerations of implantable devices concern about the battery from two aspects, the toxic materials it contains and its lifetime since replacing the battery means a surgical operation. Another challenge appears in wire-less sensor networks, where hundreds or thousands of nodes are scattered around the monitored environment and the battery of each node should be maintained and replaced regularly, nonetheless, the batteries in these nodes do not all run out at the same time. Since the introduction of portable systems, the area of low power designs has witnessed extensive research, driven by the industrial needs, towards the aim of extending the lives of batteries. Coincidentally, the continuing innovations in the field of micro-generators made their outputs in the same range of several portable applications. This overlap creates a clear oppor-tunity to develop new generations of electronic systems that can be powered, or at least augmented, by energy harvesters. Such self-powered systems benefit applications where maintaining and replacing batteries are impossi-ble, inconvenient, costly, or hazardous, in addition to decreasing the adverse effects the battery has on the environment. The main goal of this research study is to investigate energy harvesting aware design techniques for computational logic in order to enable the capa- II bility of working under non-deterministic energy sources. As a case study, the research concentrates on a vital part of all computational loads, SRAM, which occupies more than 90% of the chip area according to the ITRS re-ports. Essentially, this research conducted experiments to find out the design met-ric of an SRAM that is the most vulnerable to unpredictable energy sources, which has been confirmed to be the timing. Accordingly, the study proposed a truly self-timed SRAM that is realized based on complete handshaking protocols in the 6T bit-cell regulated by a fully Speed Independent (SI) tim-ing circuitry. The study proved the functionality of the proposed design in real silicon. Finally, the project enhanced other performance metrics of the self-timed SRAM concentrating on the bit-line length and the minimum operational voltage by employing several additional design techniques.Umm Al-Qura University, the Ministry of Higher Education in the Kingdom of Saudi Arabia, and the Saudi Cultural Burea

Integrated Circuits/Microchips

With the world marching inexorably towards the fourth industrial revolution (IR 4.0), one is now embracing lives with artificial intelligence (AI), the Internet of Things (IoTs), virtual reality (VR) and 5G technology. Wherever we are, whatever we are doing, there are electronic devices that we rely indispensably on. While some of these technologies, such as those fueled with smart, autonomous systems, are seemingly precocious; others have existed for quite a while. These devices range from simple home appliances, entertainment media to complex aeronautical instruments. Clearly, the daily lives of mankind today are interwoven seamlessly with electronics. Surprising as it may seem, the cornerstone that empowers these electronic devices is nothing more than a mere diminutive semiconductor cube block. More colloquially referred to as the Very-Large-Scale-Integration (VLSI) chip or an integrated circuit (IC) chip or simply a microchip, this semiconductor cube block, approximately the size of a grain of rice, is composed of millions to billions of transistors. The transistors are interconnected in such a way that allows electrical circuitries for certain applications to be realized. Some of these chips serve specific permanent applications and are known as Application Specific Integrated Circuits (ASICS); while, others are computing processors which could be programmed for diverse applications. The computer processor, together with its supporting hardware and user interfaces, is known as an embedded system.In this book, a variety of topics related to microchips are extensively illustrated. The topics encompass the physics of the microchip device, as well as its design methods and applications