583 research outputs found
Flat Cellular (UMTS) Networks
Traditionally, cellular systems have been built in a hierarchical manner: many specialized cellular access network elements that collectively form a hierarchical cellular system. When 2G and later 3G systems were designed there was a good reason to make system hierarchical: from a cost-perspective it was better to concentrate traffic and to share the cost of processing equipment over a large set of users while keeping the base stations relatively cheap. However, we believe the economic reasons for designing cellular systems in a hierarchical manner have disappeared: in fact, hierarchical architectures hinder future efficient deployments. In this paper, we argue for completely flat cellular wireless systems, which need just one type of specialized network element to provide radio access network (RAN) functionality, supplemented by standard IP-based network elements to form a cellular network. While the reason for building a cellular system in a hierarchical fashion has disappeared, there are other good reasons to make the system architecture flat: (1) as wireless transmission techniques evolve into hybrid ARQ systems, there is less need for a hierarchical cellular system to support spatial diversity; (2) we foresee that future cellular networks are part of the Internet, while hierarchical systems typically use interfaces between network elements that are specific to cellular standards or proprietary. At best such systems use IP as a transport medium, not as a core component; (3) a flat cellular system can be self scaling while a hierarchical system has inherent scaling issues; (4) moving all access technologies to the edge of the network enables ease of converging access technologies into a common packet core; and (5) using an IP common core makes the cellular network part of the Internet
Connecting to the Next Generation Mobile Desktop
Mobile phones have evolved over the years from a plain device that allowed voice communication to the present day smart phones that are capable of variety of tasks. Much touted smart phone lacks some of the rudimentary business as well as other functions that are available in a traditional laptop/desktop. This article proposes a new system called Next Generation Mobile Desktop (NGMD) that provides desktop equivalent functions on a functional mobile phone. Proposed NGMD leverage some of the emerging technologies to offer enhanced services to the user. This article discusses some of the existing as well as new mobile technologies and then proposes the architecture for the NGMD. This article also discusses some of the services offered by NGMD and provides illustrative examples of them. We believe NGMD capable phones would dominate the corporate market and free up the user from carrying multiple devices while on the road
Description and Experience of the Clinical Testbeds
This deliverable describes the up-to-date technical environment at three clinical testbed demonstrator sites of
the 6WINIT Project, including the adapted clinical applications, project components and network transition technologies
in use at these sites after 18 months of the Project. It also provides an interim description of early experiences with
deployment and usage of these applications, components and technologies, and their clinical service impact
MIPv6 Experimental Evaluation using Overlay Networks
The commercial deployment of Mobile IPv6 has been hastened by the concepts of Integrated
Wireless Networks and Overlay Networks, which are present in the notion of the
forthcoming generation of wireless communications. Individual wireless access networks
show limitations that can be overcome through the integration of different technologies
into a single unified platform (i.e., 4G systems). This paper summarises practical experiments
performed to evaluate the impact of inter-networking (i.e. vertical handovers) on
the Network and Transport layers. Based on our observations, we propose and evaluate a
number of inter-technology handover optimisation techniques, e.g., Router Advertisements
frequency values, Binding Update simulcasting, Router Advertisement caching, and Soft
Handovers. The paper concludes with the description of a policy-based mobility support
middleware (PROTON) that hides 4G networking complexities from mobile users, provides
informed handover-related decisions, and enables the application of different vertical
handover methods and optimisations according to context.Publicad
Survey Paper: Mobility Management in Heterogeneous Wireless Networks
AbstractEver increasing user demands and development of modern communication technologies have led to the evolution of communication networks from 1st Generation (1G) network to 4G heterogeneous networks. Further, 4G with heterogeneous network environment will provide features such as, “Always Best Connected”, “Anytime Anywhere” and seamless communication. Due to diverse characteristics of heterogeneous networks such as bandwidth, latency, cost, coverage and Quality of Service (QoS) etc., there are several open and unsolved issues namely mobility management, network administration, security etc. Hence, Designing proficient mobility management to seamlessly integrate heterogeneous wireless networks with all-IP is the most challenging issue in 4G networks. Mobile IPv6 (MIPv6) developed by Internet Engineering Task Force (IETF) has mobility management for the packet-switched devices of homogeneous wireless networks. Further, mobility management of homogeneous networks depends on network related parameter i.e., Received Signal Strength (RSS). However the mobility management of heterogeneous networks, not only depends on network related parameters, but also on terminal-velocity, battery power, location information, user-user profile & preferences and service-service capabilities & QoS etc. Designing mobility management with all-IP, while, considering issues such as context of networks, terminal, user and services is the main concern of industry and researchers in the current era
IP-Based Mobility Management and Handover Latency Measurement in heterogeneous environments
One serious concern in the ubiquitous networks is the seamless vertical handover management between different wireless technologies. To meet this challenge, many standardization organizations proposed different protocols at different layers of the protocol stack. The Internet Engineering Task Force (IETF) has different groups working on mobility at IP level in order to enhance mobile IPv4 and mobile IPv6 with different variants: HMIPv6 (Hierarchical Mobile IPv6), FMIPv6 (Fast Mobile IPv6) and PMIPv6 (Proxy Mobile IPv6) for seamless handover. Moreover, the IEEE 802.21 standard provides another framework for seamless handover. The 3GPP standard provides the Access Network and Selection Function (ANDSF) to support seamless handover between 3GPP – non 3GPP networks like Wi-Fi, considered as untrusted, and WIMAX considered as trusted networks. In this paper, we present an in-depth analysis of seamless vertical handover protocols and a handover latency comparison of the main mobility management approaches in the literature. The comparison shows the advantages and drawbacks of every mechanism in order to facilitate the adoption of the convenient one for vertical handover within Next Generation Network (NGN) environments. Keywords: Seamless vertical handover, mobility management protocols, IEEE 802.21 MIH, handover latenc
Review on NEXT Generation Technologies of Wireless Communication
Cellular communication has brought in an unparalleled revolution in the field of communication during the past two decades. The mobile communication industry growth has surpassed growth of all other fields. Even o ur own country is not left behind. The number of mobile subscribers in the country rose to over 9 11 m in Mar 201 2 . 3G system has been introduced in line with other countries. Talks have started about 4G / 5G. The implementation of 4G /5G will most probably be the ultimate goal in the field of communication
MOBILITY SUPPORT ARCHITECTURES FOR NEXT-GENERATION WIRELESS NETWORKS
With the convergence of the wireless networks and the Internet and the booming
demand for multimedia applications, the next-generation (beyond the third generation, or
B3G) wireless systems are expected to be all IP-based and provide real-time and non-real-time
mobile services anywhere and anytime. Powerful and efficient mobility support is
thus the key enabler to fulfil such an attractive vision by supporting various mobility
scenarios. This thesis contributes to this interesting while challenging topic.
After a literature review on mobility support architectures and protocols, the thesis
starts presenting our contributions with a generic multi-layer mobility support framework,
which provides a general approach to meet the challenges of handling comprehensive
mobility issues. The cross-layer design methodology is introduced to coordinate the
protocol layers for optimised system design. Particularly, a flexible and efficient cross-layer
signalling scheme is proposed for interlayer interactions. The proposed generic
framework is then narrowed down with several fundamental building blocks identified to
be focused on as follows.
As widely adopted, we assume that the IP-based access networks are organised into
administrative domains, which are inter-connected through a global IP-based wired core
network. For a mobile user who roams from one domain to another, macro (inter-domain)
mobility management should be in place for global location tracking and effective handoff
support for both real-time and non-real-lime applications. Mobile IP (MIP) and the Session
Initiation Protocol (SIP) are being adopted as the two dominant standard-based macro-mobility
architectures, each of which has mobility entities and messages in its own right.
The work explores the joint optimisations and interactions of MIP and SIP when utilising
the complementary power of both protocols. Two distinctive integrated MIP-SIP
architectures are designed and evaluated, compared with their hybrid alternatives and other
approaches. The overall analytical and simulation results shown significant performance
improvements in terms of cost-efficiency, among other metrics.
Subsequently, for the micro (intra-domain) mobility scenario where a mobile user
moves across IP subnets within a domain, a micro mobility management architecture is
needed to support fast handoffs and constrain signalling messaging loads incurred by intra-domain
movements within the domain. The Hierarchical MIPv6 (HMIPv6) and the Fast
Handovers for MIPv6 (FMIPv6) protocols are selected to fulfil the design requirements.
The work proposes enhancements to these protocols and combines them in an optimised
way. resulting in notably improved performances in contrast to a number of alternative
approaches
- …