Evaluating 3D pointing techniques

"This dissertation investigates various issues related to the empirical evaluation of 3D pointing interfaces. In this context, the term ""3D pointing"" is appropriated from analogous 2D pointing literature to refer to 3D point selection tasks, i.e., specifying a target in three-dimensional space. Such pointing interfaces are required for interaction with virtual 3D environments, e.g., in computer games and virtual reality. Researchers have developed and empirically evaluated many such techniques. Yet, several technical issues and human factors complicate evaluation. Moreover, results tend not to be directly comparable between experiments, as these experiments usually use different methodologies and measures. Based on well-established methods for comparing 2D pointing interfaces this dissertation investigates different aspects of 3D pointing. The main objective of this work is to establish methods for the direct and fair comparisons between 2D and 3D pointing interfaces. This dissertation proposes and then validates an experimental paradigm for evaluating 3D interaction techniques that rely on pointing. It also investigates some technical considerations such as latency and device noise. Results show that the mouse outperforms (between 10% and 60%) other 3D input techniques in all tested conditions. Moreover, a monoscopic cursor tends to perform better than a stereo cursor when using stereo display, by as much as 30% for deep targets. Results suggest that common 3D pointing techniques are best modelled by first projecting target parameters (i.e., distance and size) to the screen plane.

Stereoscopic bimanual interaction for 3D visualization

Virtual Environments (VE) are being widely used in various research fields for several decades such as 3D visualization, education, training and games. VEs have the potential to enhance the visualization and act as a general medium for human-computer interaction (HCI). However, limited research has evaluated virtual reality (VR) display technologies, monocular and binocular depth cues, for human depth perception of volumetric (non-polygonal) datasets. In addition, a lack of standardization of three-dimensional (3D) user interfaces (UI) makes it challenging to interact with many VE systems. To address these issues, this dissertation focuses on evaluation of effects of stereoscopic and head-coupled displays on depth judgment of volumetric dataset. It also focuses on evaluation of a two-handed view manipulation techniques which support simultaneous 7 degree-of-freedom (DOF) navigation (x,y,z + yaw,pitch,roll + scale) in a multi-scale virtual environment (MSVE). Furthermore, this dissertation evaluates auto-adjustment of stereo view parameters techniques for stereoscopic fusion problems in a MSVE. Next, this dissertation presents a bimanual, hybrid user interface which combines traditional tracking devices with computer-vision based "natural" 3D inputs for multi-dimensional visualization in a semi-immersive desktop VR system. In conclusion, this dissertation provides a guideline for research design for evaluating UI and interaction techniques

Interactive form creation: exploring the creation and manipulation of free form through the use of interactive multiple input interface

Most current CAD systems support only the two most common input devices: a mouse and a keyboard that impose a limit to the degree of interaction that a user can have with the system. However, it is not uncommon for users to work together on the same computer during a collaborative task. Beside that, people tend to use both hands to manipulate 3D objects; one hand is used to orient the object while the other hand is used to perform some operation on the object. The same things could be applied to computer modelling in the conceptual phase of the design process. A designer can rotate and position an object with one hand, and manipulate the shape [deform it] with the other hand. Accordingly, the 3D object can be easily and intuitively changed through interactive manipulation of both hands.The research investigates the manipulation and creation of free form geometries through the use of interactive interfaces with multiple input devices. First the creation of the 3D model will be discussed; several different types of models will be illustrated. Furthermore, different tools that allow the user to control the 3D model interactively will be presented. Three experiments were conducted using different interactive interfaces; two bi-manual techniques were compared with the conventional one-handed approach. Finally it will be demonstrated that the use of new and multiple input devices can offer many opportunities for form creation. The problem is that few, if any, systems make it easy for the user or the programmer to use new input devices

The design-by-adaptation approach to universal access: learning from videogame technology

This paper proposes an alternative approach to the design of universally accessible interfaces to that provided by formal design frameworks applied ab initio to the development of new software. This approach, design-byadaptation, involves the transfer of interface technology and/or design principles from one application domain to another, in situations where the recipient domain is similar to the host domain in terms of modelled systems, tasks and users. Using the example of interaction in 3D virtual environments, the paper explores how principles underlying the design of videogame interfaces may be applied to a broad family of visualization and analysis software which handles geographical data (virtual geographic environments, or VGEs). One of the motivations behind the current study is that VGE technology lags some way behind videogame technology in the modelling of 3D environments, and has a less-developed track record in providing the variety of interaction methods needed to undertake varied tasks in 3D virtual worlds by users with varied levels of experience. The current analysis extracted a set of interaction principles from videogames which were used to devise a set of 3D task interfaces that have been implemented in a prototype VGE for formal evaluation

Three-dimensional user interfaces for scientific visualization

The focus of this grant was to experiment with novel user interfaces for scientific visualization applications using both desktop and virtual reality (VR) systems, and thus to advance the state of the art of user interface technology for this domain. This technology has been transferred to NASA via periodic status reports and papers relating to this grant that have been published in conference proceedings. This final report summarizes the research completed over the past three years, and subsumes all prior reports

Augmented reality for the real world

Los Alamitos, US

Automatic Speed Control For Navigation in 3D Virtual Environment

As technology progresses, the scale and complexity of 3D virtual environments can also increase proportionally. This leads to multiscale virtual environments, which are environments that contain groups of objects with extremely unequal levels of scale. Ideally the user should be able to navigate such environments efficiently and robustly. Yet, most previous methods to automatically control the speed of navigation do not generalize well to environments with widely varying scales. I present an improved method to automatically control the navigation speed of the user in 3D virtual environments. The main benefit of my approach is that automatically adapts the navigation speed in multi-scale environments in a manner that enables efficient navigation with maximum freedom, while still avoiding collisions. The results of a usability tests show a significant reduction in the completion time for a multi-scale navigation task

Measuring user experience for virtual reality

In recent years, Virtual Reality (VR) and 3D User Interfaces (3DUI) have seen a drastic increase in popularity, especially in terms of consumer-ready hardware and software. These technologies have the potential to create new experiences that combine the advantages of reality and virtuality. While the technology for input as well as output devices is market ready, only a few solutions for everyday VR - online shopping, games, or movies - exist, and empirical knowledge about performance and user preferences is lacking. All this makes the development and design of human-centered user interfaces for VR a great challenge. This thesis investigates the evaluation and design of interactive VR experiences. We introduce the Virtual Reality User Experience (VRUX) model based on VR-specific external factors and evaluation metrics such as task performance and user preference. Based on our novel UX evaluation approach, we contribute by exploring the following directions: shopping in virtual environments, as well as text entry and menu control in the context of everyday VR. Along with this, we summarize our findings by design spaces and guidelines for choosing optimal interfaces and controls in VR.In den letzten Jahren haben Virtual Reality (VR) und 3D User Interfaces (3DUI) stark an Popularität gewonnen, insbesondere bei Hard- und Software im Konsumerbereich. Diese Technologien haben das Potenzial, neue Erfahrungen zu schaffen, die die Vorteile von Realität und Virtualität kombinieren. Während die Technologie sowohl für Eingabe- als auch für Ausgabegeräte marktreif ist, existieren nur wenige Lösungen für den Alltag in VR - wie Online-Shopping, Spiele oder Filme - und es fehlt an empirischem Wissen über Leistung und Benutzerpräferenzen. Dies macht die Entwicklung und Gestaltung von benutzerzentrierten Benutzeroberflächen für VR zu einer großen Herausforderung. Diese Arbeit beschäftigt sich mit der Evaluation und Gestaltung von interaktiven VR-Erfahrungen. Es wird das Virtual Reality User Experience (VRUX)- Modell eingeführt, das auf VR-spezifischen externen Faktoren und Bewertungskennzahlen wie Leistung und Benutzerpräferenz basiert. Basierend auf unserem neuartigen UX-Evaluierungsansatz leisten wir einen Beitrag, indem wir folgende interaktive Anwendungsbereiche untersuchen: Einkaufen in virtuellen Umgebungen sowie Texteingabe und Menüsteuerung im Kontext des täglichen VR. Die Ergebnisse werden außerdem mittels Richtlinien zur Auswahl optimaler Schnittstellen in VR zusammengefasst