Control analysis and design of medium voltage converter with multirate techniques

This work aims to unify the current knowledge about multirate controllers with design techniques for grid-tied converters, in this occasion, connected to Medium Voltage AC grid. Therefore, the multirate contributions, that have been given so far, are studied, as well as everything related to modulation techniques for power converters. The temporal implications of the DSPWM actuator will be correlated to multirate analysis, in addition to possible alternatives for applications with a lower sampling frequency than modulation one. Finalizing with explanations and result demonstrations of controllers working between two frequencies or rates, by means of the available power converter in laboratory.Este trabajo pretende unir el conocimiento actual sobre controladores multitasa o multifrecuencia (multirate) con técnicas de diseño para convertidores conectados a la red, en este caso concreto, a la red alterna (AC) de Media Tensión. Por tanto, se estudian las contribuciones multirate realizadas hasta la fecha, así como todo lo relacionado con la modulación de la señal de control para los convertidores. Las implicaciones temporales del actuador DSPWM se relacionarán con el análisis multitasa, así como se explicarán posibles alternativas para aplicaciones con una frecuencia de muestreo menor que la de modulación. Finalizando con la explicación y presentación de resultados de controladores trabajando entre dos frecuencias o tasas, mediante simulaciones del convertidor disponible en laboratorio.Máster Universitario en Ingeniería Industrial (M141

Analysis and design of ΣΔ Modulators for Radio Frequency Switchmode Power Amplifiers

Power amplifiers are an integral part of every basestation, macrocell, microcell and mobile phone, enabling data to be sent over the distances needed to reach the receiver’s antenna. While linear operation is needed for transmitting WCDMA and OFDM signals, linear operation of a power amplifier is characterized by low power efficiency, and contributes to unwanted power dissipation in a transmitter. Recently, a switchmode power amplifier operation was considered for reducing power losses in a RF transmitter. A linear and efficient operation of a PA can be achieved when the transmitted RF signal is ΣΔ modu- lated, and subsequently amplified by a nonlinear device. Although in theory this approach offers linearity and efficiency reaching 100%, the use of ΣΔ modulation for transmitting wideband signals causes problems in practical implementation: it requires high sampling rate by the digital hardware, which is needed for shaping large contents of a quantization noise induced by the modulator but also, the binary output from the modulator needs an RF power amplifier operating over very wide frequency band. This thesis addresses the problem of noise shaping in a ΣΔ modulator and nonlinear distortion caused by broadband operation in switchmode power amplifier driven by a ΣΔ modulated waveform. The problem of sampling rate increase in a ΣΔ modulator is solved by optimizing structure of the modulator, and subsequent processing of an input signal’s samples in parallel. Independent from the above, a novel technique for reducing quan- tization noise in a bandpass ΣΔ modulator using single bit quantizer is presented. The technique combines error pulse shaping and 3-level quantization for improving signal to noise ratio in a 2-level output. The improvement is achieved without the increase of a digital hardware’s sampling rate, which is advantageous also from the perspective of power consumption. The new method is explored in the course of analysis, and verified by simulated and experimental results. The process of RF signal conversion from the Cartesian to polar form is analyzed, and a signal modulator for a polar transmitter with a ΣΔ-digitized envelope signal is designed and implemented. The new modulator takes an advantage of bandpass digital to analog conversion for simplifying the analog part of the modulator. A deformation of the pulsed RF signal in the experimental modulator is demonstrated to have an effect primarily on amplitude of the RF signal, which is correctable with simple predistortion

Analogue filter networks: developments in theory, design and analyses

Not availabl

Signal processing using short word-length

Recently short word-length (normally 1 bit or bits) processing has become a promising technique. However, there are unresolved issues in sigma-delta modulation, which is the basis for 1b/2b systems. These issues hindered the full adoption of single-bit techniues in industry. Among these problems is the stability of high-order modulators and the limit cycle behaviour. More importantly, there is no adaptive LMS structure of any kind in 1b/2b domain. The challenge in this problem is the harsh quantization that prevents straightforward LMS application. In this thesis, the focus has been made on three axes: designing new single-bit DSP applications, proposing novel approaches for stability analysis, and tacking the unresolved problems of 1b/2b adaptive filtering. Two structures for 1b digital comb filtering are proposed. A ternary DC blocker structure is also presented and performanc e is tested. We also proposed a single-bit multiplierless DC-blocking structure. The stability of a single-bit high-order signma-delta modulator is studied under dc inputs. A new approach for stability analysis is proposed based on analogy with PLL analysis. Finally we succeeded in designing 1b/2b Wiener-like filtering and introduced (for the first time) three 1b/2b adaptive schemes

Improved design techniques for low-voltage low-power switched-capacitor delta-sigma modulators

This dissertation investigates the constraints which arise when switched-capacitor (SC) delta-sigma modulators are designed for low-voltage operation, targeting also low power dissipation, and proposes methods of improving the performance and optimizing for low power dissipation. This is accomplished by identifying critical elements whose performance can lead to increased power dissipation, as well as the fundamental limitations of available analog circuit techniques. A prototype was designed and fabricated, which reflected these findings, and therefore exhibited good performance and nearly optimum power dissipation. One of the key performance parameters is the dc gain of the amplifier in the first stage; it should be high. This is necessary for high linearity and low quantization noise leakage. In low-voltage operation, it may become impractical to use conventional topologies employing cascoding techniques (e.g., folded-cascode) which provide high gain in one single stage. Rather, cascaded structures have to be used. The disadvantage of the latter is the necessity for frequency compensation which results in increased power dissipation. Hence, another objective of this work is to exploit techniques which compensate for the open-loop gain characteristic of the amplifier (dc gain and nonlinearity), thus permitting the utilization of single-stage low-gain topologies. Predictive correlated double sampling is one of such techniques and is analyzed in detail

Design and implementation of generalized topologies of time-interleaved variable bandpass Σ−Δ modulators

In this thesis, novel analog-to-digital and digital-to-analog generalized time-interleaved variable bandpass sigma-delta modulators are designed, analysed, evaluated and implemented that are suitable for high performance data conversion for a broad-spectrum of applications. These generalized time-interleaved variable bandpass sigma-delta modulators can perform noise-shaping for any centre frequency from DC to Nyquist. The proposed topologies are well-suited for Butterworth, Chebyshev, inverse-Chebyshev and elliptical filters, where designers have the flexibility of specifying the centre frequency, bandwidth as well as the passband and stopband attenuation parameters. The application of the time-interleaving approach, in combination with these bandpass loop-filters, not only overcomes the limitations that are associated with conventional and mid-band resonator-based bandpass sigma-delta modulators, but also offers an elegant means to increase the conversion bandwidth, thereby relaxing the need to use faster or higher-order sigma-delta modulators. A step-by-step design technique has been developed for the design of time-interleaved variable bandpass sigma-delta modulators. Using this technique, an assortment of lower- and higher-order single- and multi-path generalized A/D variable bandpass sigma-delta modulators were designed, evaluated and compared in terms of their signal-to-noise ratios, hardware complexity, stability, tonality and sensitivity for ideal and non-ideal topologies. Extensive behavioural-level simulations verified that one of the proposed topologies not only used fewer coefficients but also exhibited greater robustness to non-idealties. Furthermore, second-, fourth- and sixth-order single- and multi-path digital variable bandpass digital sigma-delta modulators are designed using this technique. The mathematical modelling and evaluation of tones caused by the finite wordlengths of these digital multi-path sigmadelta modulators, when excited by sinusoidal input signals, are also derived from first principles and verified using simulation and experimental results. The fourth-order digital variable-band sigma-delta modulator topologies are implemented in VHDL and synthesized on Xilinx® SpartanTM-3 Development Kit using fixed-point arithmetic. Circuit outputs were taken via RS232 connection provided on the FPGA board and evaluated using MATLAB routines developed by the author. These routines included the decimation process as well. The experiments undertaken by the author further validated the design methodology presented in the work. In addition, a novel tunable and reconfigurable second-order variable bandpass sigma-delta modulator has been designed and evaluated at the behavioural-level. This topology offers a flexible set of choices for designers and can operate either in single- or dual-mode enabling multi-band implementations on a single digital variable bandpass sigma-delta modulator. This work is also supported by a novel user-friendly design and evaluation tool that has been developed in MATLAB/Simulink that can speed-up the design, evaluation and comparison of analog and digital single-stage and time-interleaved variable bandpass sigma-delta modulators. This tool enables the user to specify the conversion type, topology, loop-filter type, path number and oversampling ratio

High efficiency delta-sigma modulation data converters

Enabled by continued device scaling in CMOS technology, more and more functions that were previously realized in separate chips are getting integrated on a single chip nowadays. Integration on silicon has opened the door to new portable wireless applications, and initiated a widespread use of these devices in our common everyday life. Wide signal bandwidth, high linearity and dynamic range, and low power dissipation are required of embedded data converters that are the performance-limiting key building blocks of those systems. Thus, power-efficient and highly-linear data conversion over wide range of signal bands is essential to get the full benefits from device scaling. This continued trend keeps innovation in the design of data converter continuing. Traditionally, delta-sigma modulation data converters proved to be very effective in applications where high resolution was necessary in a relatively narrow signal band. There have been active research efforts across academia and industry on the extension of achievable signal bandwidth without compromising the performance of these data converters. In this dissertation, architectural innovations, combined with effective design techniques for delta-sigma modulation data converters, are presented to overcome the associated limitations. The effectiveness of the proposed approaches is demonstrated by test results for the following state-of-the-art prototype designs: (1) a 0.8 V, 2.6 mW, 88 dB dual-channel audio delta-sigma modulation D/A converter with headphone driver; (2) an 88 dB ring-coupled delta-sigma ADC with 1.9 MHz bandwidth and -102.4 dB THD; (3) a multi-cell noise-coupled delta-sigma ADC with 1.9 MHz bandwidth, 88 dB DR, and -98 dB THD; (4) an 8.1 mW, 82 dB self-coupled delta-sigma ADC with 1.9 MHz bandwidth and -97 dB THD; (5) a noise-coupled time-interleaved delta-sigma ADC with 4.2 MHz bandwidth, -98 dB THD, and 79 dB SNDR; (6) a noise-coupled time-interleaved delta-sigma ADC with 2.5 MHz bandwidth, -104 dB THD, and 81 dB SNDR. As an extension of this research, two novel architectures for efficient double-sampling delta-sigma ADCs and improved low-distortion delta-sigma ADC are proposed, and validated by extensive simulations.Keywords: improved low-distortion modulator, time interleaving, data converter, multi-cell ADC, efficient double sampling, noise coupling, delta-sigma modulatio

A survey on continuous-time modulators : theory, designs and implementations

Recently, delta-sigma modulation has become a widely applied technique for high-performance analog-to-digital conversion of narrow-band signals. Most of the early designs used discrete-time structure for good accuracy and good linearity. The transfer functions are independent of the clock frequency. However, high unity-gain bandwidths of the opamps are required to satisfy the settling accuracy required in the discrete-time designs. Continuous-time structure can potentially achieve higher clock frequency with less power consumption. the anti-aliasing filter can also be eliminated due to the anti-aliasing property of CT modulators. On the other hand, CT ADC have their own problems, such as jitter sensitivity and excess loop delay. In this thesis, the state-of-the-art of CT modulator is reviewed. The problems in the design of CT ADCs are analyzed and solutions to them are described. The theory, design and implementations of CT modulator will also be reviewed.Keywords: Continuous-Time, Delta-Sigm

Arquiteturas paralelas avançadas para transmissores 5G totalmente digitais

The fifth generation of mobile communications (5G) is being prepared and should be rolled out in the early coming years. Massive number of Radio-Frequency (RF) front-ends, peak data rates of 10 Gbps (everywhere and everytime), latencies lower than 10 msec and huge device densities are some of the expected disruptive capabilities. At the same time, previous generations can not be jeopardized, fostering the design of novel flexible and highly integrated radio transceivers able to support the simultaneous transmission of multi-band and multi-standard signals. The concept of all-digital transmission is being pointed out as a promising architecture to cope with such challenging requirements, due to its fully digital radio datapath. This thesis is focused on the proposal and validation of fully integrated and advanced digital transmitter architectures that excel the state-of-the-art in different figures of merit, such as transmission bandwidth, spectral purity, carrier agility, flexibility, and multi-band capability. The first part of this thesis introduces the concept of all-digital RF transmission. In particular, the foundations inherent to this thematic line are given, together with the recent advances reported in the state-of-the-art architectures.The core of this thesis, containing the main developments achieved during the Ph.D. work, is then presented and discussed. The first key contribution to the state-of-the-art is the use of cascaded Delta-Sigma (∆Σ) architectures to relax the analog filtering requirements of the conventional All-Digital Transmitters while maintaining the constant envelope waveform. Then, it is presented the first reported architecture where Antenna Arrays are directly driven by single-chip and single-bit All-Digital Transmitters, with promising results in terms of simplification of the RF front-ends and overall flexibility. Subsequently, the thesis proposes the first reported RF-stage All-Digital Transmitter that can be embedded within a single Field-Programmable Gate Array (FPGA) device. Thereupon, novel techniques to enable the design of wideband All-Digital Transmitters are reported. Finally, the design of concurrent multi-band transmitters is introduced. In particular, the design of agile and flexible dual and triple bands All-DigitalTransmitter (ADT) is demonstrated, which is a very important topic for scenarios that demand carrier aggregation. This Ph.D. contributes withseveral advances to the state-of-the-art of RF all-digital transmitters.A quinta geração de comunicações móveis (5G) está a ser preparada e deve ser comercializada nos próximos anos. Algumas das caracterı́sticas inovadoras esperadas passam pelo uso de um número massivo de font-ends de Rádio-Frequência (RF), taxas de pico de transmissão de dados de 10 Gbps (em todos os lugares e em todas as ocasiões), latências inferiores a 10 mseg e elevadas densidades de dispositivos. Ao mesmo tempo, as gerações anteriores não podem ser ignoradas, fomentando o design de novos transceptores de rádio flexı́veis e altamente integrados, capazes de suportar a transmissão simultânea de sinais multi-banda e multi-standard. O conceito de transmissão totalmente digital é considerado como um tipo de arquitetura promissora para lidar com esses requisitos desafiantes, devido ao seu datapath de rádio totalmente digital. Esta tese é focada na proposta e validação de arquiteturas de transmissores digitais totalmente integradas e avançadas que ultrapassam o estado da arte em diferentes figuras de mérito, como largura de banda de transmissão, pureza espectral, agilidade de portadora, flexibilidade e capacidade multibanda. A primeira parte desta tese introduz o conceito de transmissores de RF totalmente digitais. Em particular, os fundamentos inerentes a esta linha temática são apresentados, juntamente com os avanços mais recentes do estado-da-arte. O núcleo desta tese, contendo os principais desenvolvimentos alcançados durante o trabalho de doutoramento, é então apresentado e discutido. A primeira contribuição fundamental para o estado da arte é o uso de arquiteturas em cascata com moduladores ∆Σ para relaxar os requisitos de filtragem analógica dos transmissores RF totalmente digitais convencionais, mantendo a forma de onda envolvente constante. Em seguida, é apresentada a primeira arquitetura em que agregados de antenas são excitados diretamente por transmissores digitais de um único bit inseridos num único chip, com resultados promissores em termos de simplificação dos front-ends de RF e flexibilidade em geral. Posteriormente, é proposto o primeiro transmissor totalmente digital RF-stage relatado que pode ser incorporado dentro de um único Agregado de Células Lógicas Programáveis. Novas técnicas para permitir o desenho de transmissores RF totalmente digitais de banda larga são também apresentadas. Finalmente, o desenho de transmissores simultâneos de múltiplas bandas é exposto. Em particular, é demonstrado o desenho de transmissores de duas e três bandas ágeis e flexı́veis, que é um tópico essencial para cenários que exigem agregação de múltiplas bandas.Apoio financeiro da Fundação para a Ciência e Tecnologia (FCT) no âmbito de uma bolsa de doutoramento, ref. PD/BD/105857/2014.Programa Doutoral em Telecomunicaçõe