Macro-Driven Circuit Design Methodology for High-Performance Datapaths

Datapath design is one of the most critical elements in the design of a high performance microprocessor. However datapath design is typically done manually, and is often custom style. This adversely impacts the overall productivity of the design team, as well as the quality of the design. In spite of this, very little automation has been available to the designers of high performance datapaths. In this paper we present a new "macrodriven " approach to the design of datapath circuits. Our approach, referred to as SMART (Smart Macro Design Advisor), is based on automatic generation of regular datapath components such as muxes, comparators, adders etc., which we refer to as datapath macros. The generated solution is based on designer provided constraints such as delay, load and slope, and is optimized for a designer provided cost metric such as power, area. Results on datapath circuits of a high-performance microprocessor show that this approach is very effective for both designer productivity as well as design quality

Digital implementation of the cellular sensor-computers

Two different kinds of cellular sensor-processor architectures are used nowadays in various applications. The first is the traditional sensor-processor architecture, where the sensor and the processor arrays are mapped into each other. The second is the foveal architecture, in which a small active fovea is navigating in a large sensor array. This second architecture is introduced and compared here. Both of these architectures can be implemented with analog and digital processor arrays. The efficiency of the different implementation types, depending on the used CMOS technology, is analyzed. It turned out, that the finer the technology is, the better to use digital implementation rather than analog

Template Generation - A Graph Profiling Algorithm

The availability of high-level design entry tooling is crucial for the viability of any reconfigurable SoC architecture. This paper presents a template generation algorithm. The objective of template generation step is to extract functional equivalent structures, i.e. templates, from a control data flow graph. By profiling the graph, the algorithm generates all the possible templates and the corresponding matches. Using unique serial numbers and circle numbers, the algorithm can find all distinct templates with multiple outputs. A new type of graph (hydragraph) that can cope with multiple outputs is introduced. The generated templates pepresented by the hydragraph are not limited in shapes, i.e., we can find templates with multiple outputs or multiple sinks

Energy-efficient acceleration of MPEG-4 compression tools

We propose novel hardware accelerator architectures for the most computationally demanding algorithms of the MPEG-4 video compression standard-motion estimation, binary motion estimation (for shape coding), and the forward/inverse discrete cosine transforms (incorporating shape adaptive modes). These accelerators have been designed using general low-energy design philosophies at the algorithmic/architectural abstraction levels. The themes of these philosophies are avoiding waste and trading area/performance for power and energy gains. Each core has been synthesised targeting TSMC 0.09 μm TCBN90LP technology, and the experimental results presented in this paper show that the proposed cores improve upon the prior art

Hardware acceleration architectures for MPEG-Based mobile video platforms: a brief overview

This paper presents a brief overview of past and current hardware acceleration (HwA) approaches that have been proposed for the most computationally intensive compression tools of the MPEG-4 standard. These approaches are classified based on their historical evolution and architectural approach. An analysis of both evolutionary and functional classifications is carried out in order to speculate on the possible trends of the HwA architectures to be employed in mobile video platforms

Regular Datapaths on Field-Programmable Gate Arrays

Field-Programmable Gate Arrays (FPGAs) are a recent kind of programmable logic device. They allow the implementation of integrated digital electronic circuits without requiring the complex optical, chemical and mechanical processes used in a conventional chip fabrication. FPGAs can be embedded in traditional system designflows to perform prototyping and emulation tasks. In addition, they also enable novel applications such as configurable computers with hardware dynamically adaptable to a specific problem. The growing chip capacity now allows even the implementation of CPUs and DSPs on single FPGAs. However, current design automation tools trace their roots to times of very limited FPGA sizes, and are primarily optimized for the implementation of random glue logic. The wide datapaths common to CPUs and DSPs are only processed with reduced performance. This thesis presents Structured Design Implementation (SDI), a suite of specialized tools coordinated by a common strategy, which aims to efficiently map even larger regular datapaths to FPGAs. In all steps, regularity is preserved whenever possible, or restored after disruptive operations were required. The circuits are composed from parametrizable modules providing a variety of logical, arithmetical and storage functions. For each module, multiple target FPGA-specific implementation alternatives may be generated in both gatelevel netlist and layout views. A floorplanner based on a genetic algorithm is then used to simultaneously choose an actual implementation from the set of alternatives for each module, and to arrange the selected module implementations in a linear placement. The floorplanning operation optimizes for short routing delays, high routability, and fit into the target FPGA.Field-Programmable Gate-Arrays (FPGAs) sind eine noch junge Art von programmierbaren Logikbausteinen. Sie erlauben die Implementierung von integrierten Digitalschaltungen ohne die komplizierten optischen, chemischen und mechanischen Prozesse, die normalerweise für die Chipfertigung erforderlich sind. FPGAs können im Rahmen konventioneller Entwurfsmethoden zu Emulationszwecken und Prototyp-Aufbauten herangezogen werden. Sie erlauben aber auch völlig neue Anwendungen wie rekonfigurierbare Computer, deren Hardware dynamisch an ein spezielles Problem angepaßt werden kann. Die gewachsene Chip-Kapazität erlaubt nun sogar die Implementierung von CPUs und digitalen Signalprozessoren (DSPs) auf einem einzelnen FPGA. Die Leistungsfähigkeit der entstandenen Schaltungen wird jedoch durch die zur Zeit erhältlichen CAD-Werkzeuge limitiert, da diese noch auf stark beschränkte FPGA-Größen ausgerichtet sind und primär der platzsparenden Verarbeitung unregelmäßiger Logik dienen. Die breiten Datenpfade in Bit-Slice-Struktur, die den Kern vieler CPUs und DSPs darstellen, werden nur suboptimal behandelt. Diese Arbeit stellt Structured Design Implementation (SDI) vor, ein System von spezialisierten CAD-Werkzeugen, die auch größere reguläre Datenpfade effizient auf FPGAs abbilden. In allen Verarbeitungsschritten wird dabei die bestehende Regularität soweit wie möglich erhalten oder nach regularitätsvernichtenden Operationen wiederhergestellt. Zur Schaltungseingabe steht eine Bibliothek von allgemeinen Modulen aus den Bereichen Logik, Arithmetik und Speicherung bereit. Diese können durch Belegung verschiedener Parameter wie Bit-Breiten und Datentypen an aktuelle Anforderungen angepaßt werden

Self-timed design in GaAs - case study of a high-speed parallel multiplier

Journal ArticleAbstract-The problems with synchronous designs at high clock frequencies have been well documented. This makes an asynchronous approach attractive for high speed technologies like GaAs. We investigate the issues involved by describing the design of a parallel multiplier that can be part of a floating point multiplier. We first present a new architecture called the partial army of array (PAA) that is more regular than a partial tree approach while having the same latency. We then show how this architecture can be used in a self-timed implementation in the style of micropipelines. We next describe how we can design the final carry propagate adder using a new precharged logic family in GaAs that we developed as part of this project. We conclude with some genera1 observations on doing asynchronous design in GaAs

Metoda projektovanja namenskih programabilnih hardverskih akceleratora

Namenski računarski sistemi se najčesće projektuju tako da mogu da podrže izvršavanje većeg broja željenih aplikacija. Za postizanje što veće efikasnosti, preporučuje se korišćenje specijalizovanih procesora Application Specific Instruction Set Processors–ASIPs, na kojima se izvršavanje programskih instrukcija obavlja u za to projektovanim i nezavisnimhardverskim blokovima (akceleratorima). Glavni razlog za postojanje nezavisnih akceleratora jeste postizanjemaksimalnog ubrzanja izvršavanja instrukcija. Me ¯ dutim, ovakav pristup podrazumeva da je za svaki od blokova potrebno projektovati integrisano (ASIC) kolo, čime se bitno povećava ukupna površina procesora. Metod za smanjenje ukupne površine jeste primena DatapathMerging tehnike na dijagrame toka podataka ulaznih aplikacija. Kao rezultat, dobija se jedan programabilni hardverski akcelerator, sa mogućnosću izvršavanja svih željenih instrukcija. Međutim, ovo ima negativne posledice na efikasnost sistema. često se zanemaruje činjenica da, usled veoma ograničene fleksibilnosti ASIC hardverskih akceleratora, specijalizovani procesori imaju i drugih nedostataka. Naime, u slučaju izmena, ili prosto nadogradnje, specifikacije procesora u završnimfazama projektovanja, neizbežna su velika kašnjenja i dodatni troškovi promene dizajna. U ovoj tezi je pokazano da zahtevi za fleksibilnošću i efikasnošću ne moraju biti međusobno isključivi. Demonstrirano je je da je moguce uneti ograničeni nivo fleksibilnosti hardvera tokom dizajn procesa, tako da dobijeni hardverski akcelerator može da izvršava ne samo aplikacije definisane na samom početku projektovanja, već i druge aplikacije, pod uslovom da one pripadaju istom domenu. Drugim rečima, u tezi je prezentovana metoda projektovanja fleksibilnih namenskih hardverskih akceleratora. Eksperimentalnom evaluacijom pokazano je da su tako dobijeni akceleratori u većini slučajeva samo do 2 x veće površine ili 2 x većeg kašnjenja od akceleratora dobijenih primenom DatapathMerging metode, koja pritom ne pruža ni malo dodatne fleksibilnosti.Typically, embedded systems are designed to support a limited set of target applications. To efficiently execute those applications, they may employ Application Specific Instruction Set Processors (ASIPs) enriched with carefully designed Instructions Set Extension (ISEs) implemented in dedicated hardware blocks. The primary goal when designing ISEs is efficiency, i.e. the highest possible speedup, which implies synthesizing all critical computational kernels of the application dataflow graphs as an Application Specific Integrated Circuit (ASICs). Yet, this can lead to high on-chip area dedicated solely to ISEs. One existing approach to decrease this area by paying a reasonable price of decreased efficiency is to perform datapath merging on input dataflow graphs (DFGs) prior to generating the ASIC. It is often neglected that even higher costs can be accidentally incurred due to the lack of flexibility of such ISEs. Namely, if late design changes or specification upgrades happen, significant time-to-market delays and nonrecurrent costs for redesigning the ISEs and the corresponding ASIPs become inevitable. This thesis shows that flexibility and efficiency are not mutually exclusive. It demonstrates that it is possible to introduce a limited amount of hardware flexibility during the design process, such that the resulting datapath is in fact reconfigurable and thus can execute not only the applications known at design time, but also other applications belonging to the same application-domain. In other words, it proposes a methodology for designing domain-specific reconfigurable arrays out of a limited set of input applications. The experimental results show that resulting arrays are usually around 2£ larger and 2£ slower than ISEs synthesized using datapath merging, which have practically null flexibility beyond the design set of DFGs